Used Kempak 200 for sale (16,672)

Condition: used, FEUTRON Temperature Test Chamber / Climate Simulation Chamber Feutron 3416/16-Ex / TPK 200 Temperature range: -75 °C to +150 °C Water-cooled cascade refrigeration system For sale is a used temperature test chamber from the manufacturer Feutron Klimasimulation GmbH. The temperature test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Device type: Temperature test chamber Test chamber volume: 280 liters Temperature range: -75 °C to +150 °C Temperature deviation over time: ≤ ±0.5 K Temperature change rate: Heating: up to approx. 3.0 K/min on average Cooling: up to approx. 1.0 K/min on average Test chamber material: Stainless steel, material no. 1.4301 Test chamber insulation: CFC-free multi-layer insulation Rcsdsz Hl Dvopfx Airoh Number of shelves: 3 Lighting: 50 W Refrigeration system: Water-cooled semi-hermetic cascade system Refrigerant 1: R507 Refrigerant quantity: 2.5 kg Refrigerant 2: R23 Refrigerant quantity: 0.5 kg Cooling water connection: Cooling water pressure: min. approx. 2.0 bar / max. 6.0 bar Max. cooling water temperature inlet: approx. 18 °C Cooling water temperature outlet: approx. 30 °C Cooling water consumption on average: approx. 0.3 m³/h Power connection: 400 V / 3/N/PE AC / 50 Hz Max. simultaneous power consumption: 5.6 kW Fuse: 3 × 16 A, characteristic C Protection class: IP20 Feedthroughs: 1 × Ø 75 mm with cover cap 2 × Ø 75 mm on the side 1 × Ø 100 mm on the side Dimensions: approx. 1,500 × 1,075 × 2,140 mm (W × D × H) Weight: approx. 680 kg Equipment: Programmable Feutron control system LCD display Program and manual operation Up to 20 programs can be stored RS-232 interface Temperature monitoring 3 stainless steel shelves Test chamber lighting Observation window Several feedthroughs for test specimens Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Areas of application: Temperature testing Environmental simulation Material testing Electronics testing Component testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Device starts Control system and display are active Optical condition according to images Scope of delivery: 1 × Feutron 3416/16-Ex temperature test chamber 3 × stainless steel shelves Fan / accessories according to images Documentation according to images The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, new ! all stainless steel Rcsdpfxjz Ixw Sj Aireh closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: good (used), operating hours: 1,675 h, fuel type: diesel, Year of manufacture: 2019 Year of construction: 2019 Drive: Wheel GVW: 10.050 kg Mast: articulated arm Working height: 2.000 cm CE mark: yes Technical condition: very good Rsdpfx Ajzz Nf Aeirsch Visual appearance: good Manitou 200 ATJ | Year 2019 | 1,400 hours Very clean Manitou 200 ATJ from 2019, with only 1,400 operating hours. A well-maintained articulated boom lift offering an excellent combination of reach, manoeuvrability and versatility. The 200 ATJ is a popular model within the Manitou range and is suitable for a wide variety of applications, including construction, maintenance, installation and industrial work. The articulated boom provides excellent flexibility, allowing the operator to work over obstacles and reach areas that are difficult to access with a conventional lift. With only 1,400 operating hours, the machine has seen relatively little use for its age. It is in very good condition and is an attractive machine for both professional users and traders. Specifications: Make/type: Manitou 200 ATJ Year: 2019 Hours: 1,400 Very good condition Articulated boom lift Highly versatile Ready for immediate use A very clean Manitou 200 ATJ with a low number of operating hours, ready for its next owner. Call us directly for more information or to arrange a viewing!

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, PTC JTR-H hot water unit 140°C, steam 140°C/32 bar, and high-pressure steam 150°C/200 bar (only for the 350 bar version). Trailer similar, but not a Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer on a hot-dip galvanized frame with support leg and wheel, parking brake, automatic reversing gear, support feet, tail lights, and reflectors, drawbar for a 50 mm coupling, 13" tires, and ABS. The following hot water models with 1 burner are available: JTR-H 21/200 | 21 l/min. at 200 bar | Engine: Kohler KDW 702, 12.6 kW JTR-H 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404, 26 kW JTR-H 30/500 | 30 l/min. at 500 bar | Engine: Kohler KDW 2204, 37.5 kW The following high-pressure steam hot water models with 2 burners are available: JTR-H 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404, 26 kW - Dimensions: 3,370 x 1,650 x 1,530 - Unladen weight: approx. 850 kg - High-pressure pump: Comet RW/TW Premium - HD hose reel: manual with max. 50 m of 3/8" hose (included) - Water supply hose reel: manual with 35 m of 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-limescale pump with tank - 75 kW burner - Options and accessories available upon request. Rcjdpfxjfdvkzs Aireh

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 3.7 kW (5.03 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, broaching length: 200 mm, number of broaching positions: 4, broaching speed: 25 m/min, workpiece diameter (max.): 460 mm, total length: 1,717 mm, total width: 1,221 mm, total height: 1,885 mm, Special Offer – 5% Discount Available! Metal Slotting Machine B5020 – 200 mm Stroke The Metal Technics Polska B5020 Metal Slotting Machine is a professional industrial machine designed for machining keyways, splines, internal grooves and other precision slotting operations. Its rigid construction, large rotary table and automatic feeds ensure excellent machining accuracy, high productivity and reliable operation. The machine is ideal for tool rooms, maintenance departments and manufacturing facilities. With a maximum slotting force of 5 kN, a 200 mm ram stroke and a 360° rotary table, it is suitable for a wide range of precision machining applications. Main Features • 200 mm ram stroke • Heavy-duty industrial construction • Ø460 mm rotary table • Automatic longitudinal, cross and rotary feeds • Adjustable ram inclination • Maximum slotting force: 5 kN • High machining precision • CE certified Technical Specifications • Model: B5020 • Maximum ram stroke: 200 mm • Stroke speeds: 32 / 50 / 80 / 125 strokes/min • Ram inclination: 0°–8° • Vertical ram adjustment: 200 mm • Table diameter: 460 mm • Maximum table load: 400 kg • Longitudinal table travel: 420 mm • Cross table travel: 420 mm • Table rotation: 360° • Maximum tool size: 25 × 40 mm • Maximum slotting force: 5 kN • Main motor power: 3 kW • Feed motor power: 0.7 kW • Machine dimensions: 1717 × 1221 × 1885 mm • Machine weight: 2200 kg Applications • Keyway machining • Internal splines • Internal grooves • Slotting operations • Tool rooms • Maintenance workshops • Metalworking • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, CE Declaration of Conformity, technical documentation, warranty and professional after-sales support. Spare parts are readily available. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Rsdpfozf Huiox Airech Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Rjdpsgq N Ezefx Airoch JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. • Screw diameter: 200 mm • with degassing zone Rcsdow Iu T Tjpfx Airjh • Drive power: 72.5 kW

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Working height 160 mm Rcsdpfx Aisxmk Aaeroh 0 ja

Condition: used, all stainless steel Rodpfxez Nd Ite Airech twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S Rcodpfez Iplgex Aireh with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Rcsdpfx Aoz Ipnhoirjh F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long Rcjdoz Ipwcjpfx Airsh TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Rcodpfxsrbqtnj Airoh Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: good (used), Year of construction: 2000, Manufacturer: MAZAK Year of manufacture: 2000 Type: VTC 20 BB Machine number: Control system: Mazatrol PC-Fusion CNC 640M (Dialog programming with color graphics display) Operating hours: 33,700 h Table: 1,460 x 510 mm Table load: 800 kg Travel distances x-y-z: 1,120 – 510 - 510 mm Distance from spindle nose to table: 180 to 690 mm Distance from front of column to spindle center: 530 mm Spindle mount: SK 40 Tool changer: 24 positions Spindle speed: 40 to 10,000 rpm, continuously programmable Spindle power: 15.0 kW Feed rate: up to 8 m/min, continuously programmable Rapid traverse: 30 m/min Accessories: Renishaw tool measuring system, coolant system, spindle internal cooling, documentation Rjdpfxsz Rzumo Airech Condition: good Connection: kW Machine dimensions: 3,000 x 2,700 x 3,200 mm Weight: approx. 6 t

Condition: good (used), mileage: 57,691 km, power: 81 kW (110.13 HP), first registration: 04/2020, fuel type: electric, tire size: 185/65R15, axle configuration: 4x2, wheelbase: 2,730 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 4,600 mm, total width: 1,760 mm, total height: 1,850 mm, loading space length: 2,040 mm, loading space width: 1,500 mm, loading space height: 1,350 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 767 kg, Unladen weight: 1473 kg, Gross vehicle weight: 2240 kg, Towing capacity, unbraked: 450 kg, Towing capacity, center axle, braked: 450 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Rear window wiper, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Maintenance manual, Rear view camera, Type of lighting: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Engine power: 81 kW (109 hp), Fuel: Electric, Type of gearbox: Automatic, Power steering, ABS, ASR, Starter battery, Charging connector: Type 2, Range: Type 2, Body type: Standard, Side panels, Roof rack: None, Side doors: 1, Side windows: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, L1 NAP 200KM WLTP Sidebars Aico 1e Owner Camera Navi Full Service History!, Spare wheel, Tread depth of spare wheel: 7%, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VFT-32-Z Axle Configuration Tire size: 185/65R15 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,473 kg Payload: 767 kg GVW: 2,240 kg Functional Redpfxoz Nfbne Airoch Loading area height: 50 cm Maintenance APK (Technical Inspection): Valid until 04.2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €210 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, Year of construction: 2005, machine/vehicle number: LC689, Used Tetra Pak A3 Flex 200S, 100V filling lineTechnical Specifications & Performance DataThis used Tetra Pak A3 Flex filling line is configured for the 200S carton format and is centered on a Tetra Pak A3 Flex 100V filling machine manufactured in 2005. The line includes coordinated downstream equipment for carton handling, straw application and cardboard secondary packaging.Filler: Tetra Pak A3 Flex, version 100V, year 2005Line format: 200SAccumulator: Tetra Pak ACHX30-50M, year 2010Straw applicator: Tetra Pak SA22, year 2009Cardboard packer: Tetra Pak CBP32, year 2009Included accessories: 2 paper reels and 1 paper trolley supplied with the fillerAdvanced Automation & Control SystemsThe filling line is arranged as an integrated industrial packaging system, with the accumulator supporting product flow between filling and downstream operations. The equipment configuration is intended to coordinate filling, carton handling, straw application and cardboard packing within a continuous production process.The Tetra Pak A3 Flex filler is identified as version 100V, with the possibility of an upgrade to 150V. Any upgrade scope should be assessed against the required packaging configuration and operating requirements.Production Line Integration CapabilitiesThis Tetra Pak carton filling line combines the principal stages required after carton filling: buffering, straw application and secondary cardboard packaging. The included paper reels and paper trolley support the handling and loading of packaging material for the filler.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 Flex 100V2005Various EquipmentTetra Pak ACHX30-50M2010Various EquipmentPaper ReelVarious EquipmentPaper TrolleyVarious EquipmentTetra Pak SA222009Case PackerTetra Pak CBP322009The modular arrangement makes this second hand filling and industrial packaging line relevant for beverage production applications using the specified 200S carton format. It can be integrated with suitable upstream product preparation and downstream end-of-line handling equipment according to plant requirements.Machine Condition & Maintenance Histor... Rjdpe Adttaofx Airsch

Condition: used, Year of construction: 2011, operating hours: 14,000 h, machine/vehicle number: LC660, Used Tetra Pak A3 speed 030V 200 slim Filling lineTechnical Specifications & Performance DataThis complete used bottling line is a Tetra Pak A3 Speed (030V) configuration dedicated to 200 ml Slim cartons. It is a second hand, overhauled industrial packaging solution engineered for consistent performance in beverage production. All core components are manufactured by Tetra Pak for seamless compatibility and robust uptime.Main filler: Tetra Pak A3 Speed (030V), year 2011Container format: 200 ml Slim cartons (0.2L)Production capacity: 24,000 packs/hourRecorded hours: Filler 25,731 h; Accumulator 1,609 h; Straw applicator 14,219 h; Case packer 21,065 hLine status: Used and overhauledManufacturer: Tetra Pak (all included machines)Container type: Carton (brick-style)Included models: A3 Speed 030V filler; ACHX 30 accumulator; SA30 straw applicator; CBP30 Speed case packerAdvanced Automation & Control SystemsThe line benefits from Tetra Pak’s integrated automation philosophy, bringing reliable controls, intuitive operation, and coordinated start/stop logic across the equipment set. Operator interfaces provide clear status visualization, guided changeovers for the 200 ml Slim format, and recipe-based parameter management. Safety interlocks and guarded access points help protect operators while maintaining fast serviceability. The coordinated control across filler, applicator, accumulator, and packer reduces bottlenecks and supports stable high-speed operation in demanding packaging environments.Production Line Integration CapabilitiesDesigned for inline operation, this packaging machinery set delivers smooth product flow from filling through secondary packaging. The accumulator supports continuous production by buffering short downstream stops, while the straw applicator and case packer complete the distribution-ready presentation. The system can interface with upstream and downstream conveyors, printers, and palletizing solutions to form a complete production line.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed 030V2011Straw ApplicatorTetra Pak SA302011Accumulation SystemTetra Pak ACHX 302011Case PackerTetra Pak CBP30 Speed2011Machine Condition & Maintenance HistoryThis second hand Tetra Pak used bottling line has been overhauled and is presented in working con... Rcsdpfx As Adtx Ajireh

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Incl. robot (ASS) Production in clean room. Redpjt Dxqtsfx Airech

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,716 h, load capacity: 20,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 3,160 mm, empty load weight: 22,100 kg, total length: 3,700 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift truck – LPG Load center: 500 Mast type: Standard Condition: Ready for use and fully operational Rcedpfxoz Evvas Airoh Technical condition: Very good Description: In addition to this RMF model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Hire purchase & financing on favorable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this MAXEIN DWB 200/500G. P.S.: Our master forklift workshop specializes in repair, refurbishment, overhaul, and custom builds for forklifts from 8 tons and up. We will also be glad to offer your vehicle for consignment sale at our facilities. Sideshift, Crane arm, telescopic and tiltable. Telescopic boom from 2410–3750 mm; the extension arm can be tilted from approx. 30° downward up to 45° upward. Heater, full cabin,

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 11,000 kg, total length: 3,280 mm, total width: 2,000 mm, total height: 2,700 mm, input voltage: 400 V, warranty duration: 12 months, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Rcjdpfxsyttbmj Aireh Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl, in absolutely top condition! Device features: - Shear model: MSB 200 - Cutting capacity: see nameplate, up to 3mm steel – significantly more for aluminum - Working length: just over 2 meters - Manual back gauge: 500 mm - Side / angle gauge - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 meters - Sheet thickness (steel): 3 mm – significantly more for aluminum and zinc Rcjdpfx Aewfzztsireh - The machine was used extremely rarely, approx. 1-2 times per month for thin sheets at a lamp manufacturer - It shows hardly any signs of use; this condition is rare - The total price is less than half the current new price – the price list is from last year! If you have any questions, feel free to call briefly. We have this set twice, as well as other models such as the Schechtl MAX 200 (2.5mm) or MA 200 (2mm). The current net new price for both machines can be seen in the photos. You will receive an invoice with VAT shown separately. I can arrange shipping by freight forwarder if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible by prior telephone arrangement. Payment in cash upon collection – if there is anything else I can do for you, please call me briefly – thank you. Collection should take place within 8 days after the end of the auction. Item number:

Condition: used, Year of construction: 2001, REVICART FARO 200 Max sheet dimension: 1200 x 2010 mm / 47" x 79" Rcedpfez Ak E Tex Airoh Bottom Lock 4 gluing points

Condition: new, 60.06 m shelving, 40 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 60.06 running meters Shelf offer 60.06 running meters consisting of: - 0061 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0300 x shelf approx. 100 x 40 cm. - 1200 x shelf holder. - 0061 x Diagonal 1176 mm ( for crossing ). - 0061 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5.610,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Rsdpfs Afw S Njx Airech Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, 15.06 m shelving, 40 cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 15.06 running meters Shelf offer 15.06 running meters consisting of: - 016 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 075 x shelf approx. 100 x 40 cm. - 300 x shelf holder. - 016 x Diagonal 1176 mm ( for crossing ). - 016 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Rcodpfx Ao Afw Nnoiroh Price : 1648,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2024 Empty weight: 650 kg Rcodpo Af Uc Iefx Airsh Working width: 200 cm Required tractor power: 110 hp