Used Knives for sale (1,224)

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Tjdpfou Nlkxsx Abtsb

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm Tjdpfxslwqgao Abtsb - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Condition: good (used), Chipper Klockner 120x400 L2 / 1W - German production - DTR Tjdpfx Abehfmuretsb TECHNICAL SPECIFICATIONS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm two knives sieve 60 x 60 mm engine power 37 kW engine power 2 x 2.2 kW two lower toothed shafts top toothed shaft feeder length 4900 mm chute the wood chips with a sieve transport dimensions (length / width / height) 850/245/220 cm weight ~ 2500 kg

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Tsdpsq Sp H Tjfx Abtjb Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically showcases the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Condition: excellent (used), 4-knife shaft for traditional knives two adjustable tables Tjdpfsv H U N Uex Abtsb length of tops 3050mm planing width 630mm 5 kW motor adjustable ruler 0-45°

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Tsdpfx Aewqdfxsbtjb Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 WEIGHT: 900 KG

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Tsdpfx Abow R T Dieteb Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: new, Year of construction: 2026, Two-Shaft Shredder GL32120 – 30 kW + 30 kW – NEW SHREDDER EQUIPPED WITH HYDRAULIC PRESSURE (PLEASE REFER TO THE ATTACHED TECHNICAL DRAWING OF THE MACHINE) GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new industrial two-shaft shredder, 3E Machinery GL32120, equipped with two independent drives with a power of 30 kW + 30 kW. The machine operates at low speed and high torque, making it suitable for demanding industrial applications and shredding a wide range of materials. TECHNICAL SPECIFICATIONS: Model: GL32120 Type: Two-shaft shredder Motor power: 30 kW + 30 kW Rotor length: 1,200 mm Rotor diameter: 430 mm Number of knives: 30 pcs. Knife thickness: 40 mm Shredding chamber dimensions: 1,212 × 736 mm Machine dimensions (L × W × H): 3,650 × 1,346 × 2,275 mm Weight: approx. 5,200 kg Control system: electrical control cabinet with Siemens PLC Condition: Brand new APPLICATIONS: Tjdpfx Asvpuq Dsbtob The GL32120 two-shaft shredder can be used for shredding various materials, including: plastics, industrial waste, wood and pallets, electronic waste, barrels and containers, municipal waste, paper and cardboard, metal-containing waste, used tires, and many other materials intended for recycling. The robust design and low-speed, high-torque shredding system make the GL32120 an excellent solution for heavy-duty recycling applications. The modular construction of the shredding chamber provides easy access to the main components for maintenance and servicing. Machine available in our inventory. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and recycling lines: GrabTrade – shredding and recycling machines.

Condition: new, ZERMA single-shaft shredders of the ZPS series offer versatile applications. They are suitable for the size reduction of heavy and bulky parts that cannot be directly granulated by a granulator. The large and heavy rotor of the ZPS shredder series, combined with the low rotor speed and high torque, ensures low power peaks, thereby avoiding high energy costs. Todpfx Aeyr I Ixjbtsb Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the specific requirements, the shredded material can be used directly in the processing operation or can be further granulated in a downstream granulator. The shredders of the ZPS series are equipped with a two-stage hydraulic system that prevents rotor blockage. The knives and knife holders are completely bolted to the rotor. Generously sized, externally mounted rotor bearings and a hydraulically tiltable screen basket come as standard on every shredder. The machines can be equipped or upgraded with numerous options, such as rotor cooling or Hardox wear protection. Compared to ZSS shredders, the machines of the ZPS series are equipped with a higher pressure unit, which optimizes the feed between pusher and rotor, especially for large-volume parts or pipes.

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders. Tedeyx Uy Aopfx Abtjb

Condition: used, machine/vehicle number: 13359, Rotor diameter: 250 mm Tsdpfx Aboyxtnxstjb Rotor width: 650 mm Rotor knives: 39 Stator knives: 2 rows Feed opening approx.: 250 x 650 mm Drive motor: 15 kW

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. Todsymampepfx Abtob 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 500 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,200 kg, Offering a used MARTIN surface planer model T54 for sale. Sale due to restructuring of the company. General Technical Features: Motor power: 5.5 kW (7.5 hp) Planing width: 500 mm Cutting depth: max. 8 mm Todpfx Abszwf Hnjtsb Infeed table length: 1640 mm Outfeed table length: 1200 mm Table height: 850 mm Speed: 5000 rpm Weight: 1200 kg Safety device SUVAMATIC Guard for the cutterhead PRISMA Type 1567 TERSA solid steel cutterblock Z2 for 4 TERSA knives Diameter 125 mm Operation: Electric depth adjustment with display, Concave/convex adjustment with display Fence: Adjustable up to 45° with one-hand operation and integrated auxiliary fence Dust extraction: Dust extraction connection diameter 160 mm Electrical equipment: Electronic soft start, electronic brake – wear-free. The machine is still connected and can be tested. Price is plus statutory VAT.

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm Tjdpfxjzrx Hqe Abtob - Maximum tool width: 230 mm

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor Todpfjyr Tqrjx Abteb 2 rows of stator knives Infeed opening approx. 500 x 490 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 12727, Rotor diameter: 300 mm Rotor width: 900 mm 3-knife rotor Todpfx Asyr Tqxjbtob 2 rows of stator knives Infeed cross-section approx. 300 x 900 mm Drive motor: 30 kW Including flywheel

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm Tsdpjyr Tp Uofx Abtob 12-knife rotor 3 rows of stator knives Infeed opening approx. 780 x 1490 mm Drive motor: 132 kW

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor Tedpfx Ajyr Tqlebtob 2 rows of stator knives Infeed cross-section approx. 600 x 660 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Rotor width: 520 mm 4-knife rotor 2 rows of stator knives Infeed opening approx. 340 x 520 mm Tsdpjyr Tq Ejfx Abteb Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12862, Rotor diameter: 250 mm Rotor width: 380 mm 3-knife rotor 2 rows of stator knives Tsdpfsyr Tq Sex Abtsb Infeed cross-section approx. 280 x 350 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 13009, Rotor diameter: 600 mm Rotor width: 1200 mm Rotor knives: 3×4 Tjdjyr Ttgopfx Abtsb Stator knives: 2 Feed opening approx. 1200 x 600 mm Drive motor: 75 kW

Condition: used, machine/vehicle number: 12861, Rotor diameter: 400 mm Tjdpfx Aeyr Trcjbteb Rotor width: 600 mm 3-knife rotor 2 rows of stator knives Feed opening approx. 400 x 600 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 12979, Rotor diameter: 300 mm Rotor width: 200 mm Rotor knives: 3 Stator knives: 3 Feed opening approx. 220×320 mm Tedpfoyr Tw Sox Abtsb Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 14037, Rotor diameter: 260 mm Rotor width: 450 mm Rotor knives: 3 Stator knives: 2 Infeed opening approx. 440×400 mm Drive motor: approx. 11 kW Todpfx Aeyr Ty Tjbtsb

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Tjdpsyr I Irsfx Abtjb Rotor diameter: 400 mm Working cross section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder