Used Krause for sale (97)

Condition: used, Year of construction: 1970, Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Hub des Druckstückes / stroke of the pressure piece ca. 30mm Stanzhübe / punch strokes per minute ca. 84 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kljdpfx Abeiiduajcop

Condition: used, machine/vehicle number: 19163, Pappschere / Board Cutter Krause 140/72cmSchnittlänge / Cutting Length 140cm Tischbreite / Table width 72cm Auffang- tisch, Fußpressung Vorderan- schlag mit Schmalschneider vordere Anlegeleiste mit darauf verschiebbarem Anlege- winkel Maßskalen in mm-Teilung Ksdpfsh Szf Ejx Abcelp Gewicht/ Weight 420 kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Heißpräge - Kniehebelprägepresse / Embossing Hot Stamping Press  Krause FNP Online-Video-Inspection by Skype-Video Klodpjtzc Nnefx Abcop We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, antike Schneidmaschine / antique Guillotine  Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ksdpet Drl Defx Abcolp On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 101073, Universelle Stanzmaschine - Punching machine Krause 101073Serial-No. 101073 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Klodpfoh Axmijx Abcep Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 143373, Prägemaschine - Stamping Machine Krause 143373Serial-No. 143373 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kedpfx Abeh Axn Sscjlp

Condition: used, machine/vehicle number: 20048, Spindelpresse - Spindle Press Krause SP-SPressfläche / Pressing Size max. 500 x 600mm Gereinigt und neu Lackiert / Cleaned and new painted Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Kljdpoh Ayiasfx Abcsp Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. Kodpfx Aboxb Ucajcelp - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: ready for operation (used), functionality: fully functional, Very heavy-duty book press for sale. Made by Karl Krause Leipzig. Press size: 53 x 66 cm. Kledpfx Absymctlocop Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please ask for a price including transport (location: the Netherlands). Regards, Henk Hoos

Condition: ready for operation (used), Year of construction: 2003, A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible. Klodpovtqq Uofx Abcep

Condition: used, Punching machine for, e.g., slipcases with many punching dies Ksdpfx Asxw N Ntobcjlp

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again Ksdpfxjri Sice Abcelp to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Sale of a container conveyor system with a pick-by-light system. The conveyor system extends over several sections and partial circuits (loops) over which the containers are transported. Year of construction and modifications during the years: 2007 Built by Hörmann Logistik 2016 Conversion of Loop 3 (complete renewal of the conveyor system, rollers, and control system) by Förster & Krause 2020 Complete renewal of the Pick By Light system by KBS 2021 Conversion of Loop 2 (complete renewal of the conveyor system, rollers, and control system) by Förster & Krause Loop 1 (Partial Loop 1 Conveyor System) - Main Loop - 2 stations for the adjacent floor storage area for storing full pallets - One lane for containers identified as non-conforming after inspection - A total of 20 empty containers are in circulation simultaneously Loop 2 (Partial Loop 2 Conveyor System) - 3 stations for push-through racks - 15 empty containers are in circulation simultaneously - Dimensions approx. 4m x 38m Loop 3 (Partial Loop 3 Conveyor System) - 2 stations For push-through racks - 15 empty containers in circulation simultaneously - Dimensions approx. 4m x 35m This is followed by 12 packing stations where the containers can be processed. From here, the packaged goods are packed into cartons and routed to 4 shipping lanes. Klodpfx Aewa Tgqsbcjp Containers: The portfolio includes a total of 150 containers measuring 60x40x28cm. Pick By Light: KBS Pick By Light PTF series 7 zone displays 900 compartment displays 2 controllers/interfaces Terms of Sale: § 1 Subject of the Contract As already described, a container conveyor system and the Pick By Light system are offered for sale. The buyer acknowledges that this is a used system. § 2 Purchase Price The purchase price is negotiable. VAT is deductible. § 3 Collection The buyer undertakes to dismantle the system at the seller's location, namely the site, at his own expense and responsibility. The dismantling of the system will take place at a time agreed upon between the parties, at least in writing. The agreed time must be chosen so as not to disrupt the seller's general business operations. The seller will grant the buyer access to the premises to dismantle the system, provided that all safety and access regulations of the seller are observed by the buyer. The risk of accidental loss shall pass to the buyer upon handover at the site. Handover shall take place at the latest when the buyer begins to dismantle the system independently. § 4 Warranty and Liability The buyer purchases the system as seen. The seller excludes any warranty or liability, regardless of the legal nature of the asserted claim, unless a guarantee has been given for the quality of the goods or a defect has been fraudulently concealed. This exclusion does not apply to claims for damages – regardless of the legal basis – if the seller, its legal representatives, or vicarious agents have breached their obligations through gross negligence or intent, nor to the mandatory liability without fault, e.g., under the Product Liability Act. § 5 Retention of Title Ownership of the contractual items remains with the seller until the purchase price has been paid in full.

Condition: used, Year of construction: 2013, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Ksdpox N Nc Hofx Abcjlp if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2017, x-travel 700 mm y-travel 700 mm z-travel 700 mm Ksdpfx Aoyquarsbcelp Control Siemens type 840Dsl Number of spindles 2 St. Double reversible clamp The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2004, x-travel 800 mm y-travel 630 mm z-travel 710 mm Control Siemens type 840Dsl Number of spindles 2 St. turning speeds 30-12000 U/min tool taper HSK 63 Tool changer 80 Pos. Kodpjyqrx Sefx Abcolp Feed 1-40.000 mm/min NC rotary table (B-axis) 250 degrees, minimum indexing unit 0.001 degrees, NC rotary table (A-axis) 360 degrees, minimum indexing unit 0.001 degrees, Cooling system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, FLEISSNER crimping machine - Chamber width: 200 mm - Steam heated - Including steam box - Including dancer roller for tension control Kljdpfx Aboytcpascop - Including concave rollers + transport rollers for cable width adjustment The system is available twice (price indicated per unit) Please note that dismantling, packing, and shipping/collection of the system must be handled by the buyer.

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) Kodpox H Au Rjfx Abcslp MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Klodpfx Asqvuicobcop

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included Kodpoyv D Hgefx Abcolp screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Year of construction: 2016, operating hours: 32,000 h, condition: ready for operation (used), overall weight: 1,100 kg, Single screw extruder manufactured in 2016. This Krauss Maffei KME 45 XS Extruder weighs 1,100 kg and operates at a voltage of 400 V with a total current of 235 A. The machine has undergone a motor conversion in 2023 and has a total of 32,000 operating hours. If you are looking to get high-quality extrusion capabilities, consider the Krauss Maffei KME 45 XS machine we have for sale. Contact us for further details. • Operating voltage: 400 V (3-phase) • Frequency: 50 Hz • Short-circuit withstand capability: 3 kA • Pre-fuse: 250 A • Total current: 235 A • Motor current: 48 A • Heating current: 68 A • Motor conversion: Performed in 2023 • Operating hours: 32,000 h Kledpfxeyu S Izs Abcop

Year of construction: 2000, condition: ready for operation (used), This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Euromap Interface: 12 / Hydraulic Units: 1 Machine Benefits Ksdpfeyaryuex Abcslp Technical Machine Benefits • Max. Pressure: 1878 bar / max. Injection volume: 275 cm³ • Hot nozzle zones: 1 / screw diameter: 45 mm

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Kedpfx Aeyaizvsbcslp Machine still under power

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg Kledpfeylkxajx Abcep • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Year of construction: 2001, condition: ready for operation (used), This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information. Ksdpfxoyary Uo Abcjlp Machine Benefits Technical Machine Benefits • Screw diameter: 50 mm/ max. Pressure: 1521 bar / max. Injection volume: 340 cm³ • Euromap interface: 12 / hydraulic units: 1 / air units: 1 / hot nozzle zones: 1