Used Ksm 2600 for sale (1,002)

Condition: used, Year of construction: 2019, machine/vehicle number: 2109, Knife length: 2400 mm, wire length: 6580 mm Cedpfx Aoyztihja Njrb

Condition: good (used), Year of construction: 2014, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg Credpfewtg Injx Aa Nsb

Condition: good (used), Year of construction: 2016, spindle speed (max.): 3,500 rpm, overall weight: 6,450 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Crsdpfx Ajwtg R Asa Njb Automatic tool measurement with probe arm Weight.: 6450 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm Cedpfx Aajyzzf Ro Norb AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW 40-station ATC Tool turret Number of driven tools 12 (12)

Condition: used, Year of construction: 2008, Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Make: Transnorm Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Codpfsri Snpsx Aa Norb Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Machine crossing with platform (bridge) 4570-880-2600 RA1996 Technical data: Manufacturer: In-house production Type: machine crossing with pedestal Condition: very good (used) Total size: 4570-880-2600 mm (WxDxH incl. handrail) step dimensions: 240 x 800 x 35 mm step/tread height: 200 mm platform dimensions: 850 x 800 mm Platform height: 1400 mm bottom edge 1600 top edge Steps: 8 (7 steps + platform on each side) Weight: 390 kg Cedpjk Abrrofx Aa Nsrb Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Csdpfx Ajxk T Efja Norb Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: like new (used), Year of construction: 2019, operating hours: 289 h, overall weight: 272 kg, load capacity: 20 kg, We offer this used ABB IRB 2600-20/1.65 industrial robot, year of manufacture 2019. Type: IRB 2600 Robot variant: IRB 2600-20/1.65 Protection rating: Standard Crodpfx Aasy Anv Ee Neb Payload: 20 kg Serial number: 2600-113346 Date of manufacture: 2019-10-14 Maximum load: see load diagram Weight (net): 272 kg If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2019, operating hours: 205 h, overall weight: 272 kg, load capacity: 20 kg, We offer this used ABB IRB 2600-20/1.65 industrial robot, year of manufacture 2019. Type: IRB 2600 Robot variant: IRB 2600-20/1.65 Protection: Standard Payload capacity: 20 kg Crodpfx Ajy Anvfea Nob Serial number: 2600-13325 Date of manufacture: 2019-10-08 Maximum load: see load diagram Weight: 272 kg If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, functionality: fully functional, machine/vehicle number: 105000002, Year of construction: 2001, operating hours: 2,600 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, fork length: 1,600 mm, empty load weight: 8,800 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,200 mm, Sideload forklift Csdpfx Aaoy Ety Us Nerb Chassis number: 105000002 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Normal Description: Steinbock 557 side loader, year of manufacture 2001, only 2,600 operating hours. Robust and reliable piece of equipment, ideally suited for use in industrial environments, warehouses, and timber handling. Its solid construction, straightforward technology, and high load capacity make this side loader a long-lasting asset for everyday operations. Used condition with age-related wear, technically ready for use. Export price: €7,400.00 Inspection and test run available by appointment. Errors and prior sale excepted.

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 289.112 - Drive system: CNC - Control system brand: Beckhoff - Power [kW]: 16.8 - Resonator brand: Hypertherm - Resonator type: Powermax 105 - X-axis travel [mm]: 3000 - Y-axis travel [mm]: 1500 - Max. material thickness [mm]: 32 Crsdpfx Aexrz Hmoa Njb - Control type: Beckhoff - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2003, Used 2.5 meter press brake from Ermaksan Crjdpoyykkmsfx Aa Nsb Model: AP 2600 60 Capacity: 2600 x 60 tons Elgo NC control 1 set of tools Year of manufacture: 2003

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% Crsdpfx Ascbq Nwja Nob massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: like new (used), Year of construction: 2019, WORKING RANGE Max swinging diameter Ø mm 650 Max turning diameter Ø mm 300 Cedpfxey Ayhms Aa Nerb Max turning length mm 610 SPINDLE (BELT DRIVEN) Spindle nose ASA – A2" 8 Bar capacity diameter mm 81 Spindle speed rpm 3,500 Power 30 min/continuous kW 18.5/15 SUB-SPINDLE Spindle nose ASA – A2" 5 Bar capacity diameter mm 32 Spindle speed rpm 6,000 Power 30 min/continuous kW 5.5/3.7 TRAVELS AND FEED RATES X-axis travel mm 215 Y-axis travel mm 110 Z/ZB-axis travel mm 680/680 X-axis rapid traverse mm/min 30,000 Y-axis rapid traverse mm/min 10,000 Z/ZB-axis rapid traverse mm/min 24,000 BIDIRECTIONAL TURRET Number of live stations n 12 Tool holder size for external/internal turning mm 25 x 25 Boring holder diameter mm Ø40 Turret type BMT55 C-AXIS + Y-AXIS 2+2 Driven Tools Automatic part ejector + parts conveyor belt

Condition: excellent (used), Year of construction: 2020, operating hours: 3,833 h, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and sub-spindle. Manufacturer: Doosan Model: MX 2600 ST Year of manufacture: 2020 Condition: Very well maintained, machine comes from a site closure. Operating times: Control on: 13,127 hours Run time: 3,833 hours Machining time: 2,835 hours The upper head is fed by a tool magazine and can be rotated or milled at various angles. Even highly complex components can be fully machined without additional repositioning. Cjdpfx Aajywkw Ij Nerb CNC Control: Fanuc 31i-B Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA mount: A2-8 Spindle speed: 4,000 rpm AC motor power (cont./30min.): 22/26 kW Turning/Milling head B-axis rotation / indexing: 240° (±120°) Tool interface: Capto C6 Spindle speed: 12,000 rpm AC motor power (30min.): 15/18.5 kW Number of tools: 40 (Opt. 80) Turret Number of driven tools: 12 (12) Driven tool power: 7.8 kW/30min. Weight: 15.5 t.

Condition: new, Year of construction: 2026, Belt width: 200 mm Belt length: 2600 mm Crodpfxeyvz Ris Aa Nob Oscillation: yes Sanding rollers for contours: 1 Tilting sanding unit: yes Table size: 930 mm x 300 mm Extraction connection: 140 mm Motor power: 3 kW Machine length: 1700 mm Machine width: 700 mm Weight: 280 kg

Year of construction: 1996, condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm Csdpsbpytpofx Aa Nerb weight: 170 kg space needed: 560 x 1570 x 1080 mm

Year of construction: 1996, condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm weight: 170 kg Crodpfx Asb N Eu Isa Neb space needed: 560 x 1570 x 1080 mm

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 2600 X 1050 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW Codpfeh Txl Iex Aa Nerb 6 pcs manual pressures per 1 area Self weight 1350kg. Very good condition. Available immediately.

Condition: new, pressure 26,0 kN Crjdpofv Avrjfx Aa Njb stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: used, Technical details: Cedpfxow Rktbs Aa Nsrb grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: new, Year of construction: 2022, Strip width: 150mm Belt length: 2740mm veneer sanding device: no oscillation: yes roller diameter: 115 mm Grinding unit swivels: yes / 90° - 0° worktable: 900 x 305 mm additional table: 290 x 260 mm Belt speed : 16 m/sec. m/sec. Suction connection : 100mm Motor power : 3 kW / 400V Machine length: 1540 mm Credpfxehq A H Dj Aa Njb Machine width: 750 mm Weight: 220 kg

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of blast turbines: 4 Power per blast turbine: 22 kW Abrasive throughput per turbine: 7 kg/hour Shot flow rate: 450 kg/min Blast velocity: 80 m/s Maximum product dimension: 1,400 x 1,000 mm Codpsyua D Rofx Aa Nsrb Cabin diameter: 2,200 mm MACHINE DETAILS Control system: Siemens EQUIPMENT Vibratory screen for abrasive media and discharged material Feed via external rail system CE marking

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm Crodoyr R A Eopfx Aa Nsb • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 680 mm, total height: 1,755 mm, overall weight: 5,800 kg, controller manufacturer: FANUC, controller model: Series, product length (max.): 3,400 mm, number of axes: 2, This Hyundai Wia HD 2600 horizontal turning machine was manufactured in 2025. It features a swing over the bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports a speed of 3,500 rpm with a motor power of 26/18.5 kW. It also includes a 10-tool turret and a rapid traverse rate of 24/30 m/min. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia HD 2600 machine we have for sale. Contact us for more information. • Original packaging Capacity • Swing over the bed: 630 mm • Swing over the carriage: 460 mm • Max. turning diameter: 460 mm • Max. turning length: 659 mm • Bar capacity: 80 mm • Chuck size: 10" Spindle • Spindle bore: Ø91 mm • Motor (max/cont.): 26/18.5 kW (35/25 HP) • Torque (max/cont.): 734/522 Nm (541/385 lbf·ft) • Torque (additional value stated): (828/748 Nm) • Spindle type: Belt • Spindle nose: A2-8 • C-axis indexing: 0.001° Feed • Rapid traverse rate (X/Z): 24 / 30 m/min (945 / 1,181 ipm) • Slide type: Box guide Turret / Tooling • No. of tools: 10 (12) • Tool size (OD): 25 mm • Tool size (ID): Ø50 mm • Indexing time: 0.15 sec Tailstock • Type: MT#5 (Built-in tail stock - MT#4) • Quill diameter: Ø100 mm • Quill travel: 120 mm • Travel: 680 mm Crodpfeycvwcjx Aa Njb Tank Capacity • Coolant tank: 180 L (47.6 gal) • Lubricating tank: 18 L (4.75 gal) Power Supply • Electric power supply: 27 kVA • Thickness of power cable: Over 16 mm² • Voltage: 220/60 (200/50)