Used Labeling System for sale (35,437)

Condition: ready for operation (used), Bridge Lifting Power Unit,Structural lifting system,Hydraulic lifting unit, 1000-ton hydraulic cylinder, Used Machine Manufacturer: Barabás Engineering Office Ltd. Type: PHHET Overall dimensions: Width: 1420 mm Depth: 860 mm Height: 1770 mm Operating pressure: 350 bar Year of manufacture: 2017 Weight: 850 kg Electrical data: 400 V; 11 kW; 20 A Hydraulic Cylinders: 1. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Kwedpfx Aoyr Ihrobcsw Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm 2. Overall dimensions: 900 x 900 x 485 mm Weight: 1400 kg Manufacturer: Schiess Defries Operating pressure: 450 bar Load capacity: 1000 tons Diameter: 710 mm

Condition: good (used), AL-KO mobile extraction unit 160 Kjdpoywnwxsfx Abcoww - with filter bag - with chassis / mobile on wheels - filter bag included - last used in workshop - suction nozzle approx. 160 mm - motor power approx. 1.5 kW - voltage 400 V - negative pressure approx. 2500 Pa

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Digicon series 2 2010 model specifications: • Web Width: 330 mm • Flexo Varnishing Unit: 1 unit • Rotary Die-Cutting Unit: Equipped with a K&B GapMaster system • Maximum Unwind Roll Diameter: 700 mm Kedpfeyl Alfox Abcsww • Running Speed: Up to 36 meters per minute at a 300 mm repeat length • Plate Cylinder Flexo Sizes: • Minimum: 10 inches (254 mm) • Maximum: 24 inches (609 mm) • Maximum Rewind Diameter (Single Spindle): 600 - Rotary and flat blade spitting

Condition: excellent (used), functionality: fully functional, Max. air flow rate: 800 m³/h Kjdpfoyv Eu Sex Abcoww Max. negative pressure: 1,800 Pa Suction connection: 150 mm Suction connection height: 300 mm Drive power: 1.10 kW Connection voltage: 220 / 380 volts (4.33 / 2.5 amps) Dimensions (L/W/H): 610 x 740 x 1,150 mm Total depth: 670 V Sound pressure level: 72 dB(A) Weight: 70 kg • Includes flexible suction arm • Suitable for almost all types of dust • Cleanable, durable bag filter

Condition: used, Year of construction: 2021, machine/vehicle number: 70602008, High-performance industrial vacuum evaporator designed for the treatment and volume reduction of industrial wastewater and process liquids. This system uses heat pump technology combined with vacuum evaporation to achieve efficient distillation at low temperatures. Technical Specifications:Capacity (distillate production): approx. 12,000 – 12,700 L / 24 h Technology: Heat pump vacuum evaporation Operating mode: Fully automatic continuous operation with PLC control (Siemens) Refrigerant: R134a Kedpfx Ajyu Sfaebcjww Installed power: approx. 114 kW Operating temperature: 35 – 45 °C Distillate temperature: 37 – 47 °C Concentrate temperature: 35 – 45 °C Operating pressure: 6 – 8 kPa (vacuum) Dimensions and Weight Total length: approx. 5600 mm Total width: approx. 1500 mm Total height: approx. 3800 mm Weight: approx. 4,000 – 5,000 kg Condition: Used – very low operating hours. EVALED AC R 6 (vacuum evaporator / crystallizer “R” scraped type) is about 6 t/day class. Veolia EVALED AC R6 FF3 Vacuum Evaporator / Crystallizer – Wastewater Treatment

Year of construction: 2009, condition: ready for operation (used), number of axes: 2, Main Drive Kedpfx Asx D H D Usbceww Number of axis 2 This SCHÜCO ISOMAT 5 was manufactured in 2009. It features a robust machine construction, 10 lateral guide rollers, and a quick release mechanism on all guide rollers. Capable of processing profiles with depths up to 250 mm and heights up to 400 mm, it includes an ergonomically designed control panel and a safety cage for optimal operator safety. Reach out for more information. Application Types Other Automation Equipment

Condition: used, gebraucht 6019 390 € 1 270 € 40 kg Kwedpjytx Huefx Abcjw 1500 mm 600 mm 1000 kg 700 - 1.000 mm MINT CONDITION 3 table elements with 6 balls each

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. robot RT 330 on rotary gallow, control K 5, gasnozzlesensing, seam tracking ( option), Kodpecrtlisfx Abcsww mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm warranty: 6 month for material

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation Kwedpfjywd I Tjx Abcow 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: new, Year of construction: 2026, It is a complete painting system, consisting of the following components: 1) An oven comprising an air heater (the fuel type can be adapted to the customer’s requirements). 2) A spray painting booth equipped with an absorbent filtration system suitable for capturing even the most demanding paint applications. 3) Two parking areas, where the parts can be placed after painting or curing. 4) A rail system allowing easy movement of the parts from one station to another. Kjdpeyaqt Tjfx Abcsww 5) A trolley used for transporting the above-mentioned parts. 6) A fully integrated steel structure, statically robust, designed to minimize the risk of failure of any component. From both a design and technical specification standpoint, the above installation constitutes a complete and autonomous electrostatic painting process.

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Kedpfx Aofirx Nebcsww Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: used, Year of construction: 2021, Nominal volumetric flow rate: 5100 m³/h Max. volumetric flow rate: 6000 m³/h Pressure difference at nominal flow rate: 2700 Pa — at max. flow rate: 2200 Pa Filter area: 28 m² Suction nozzle: 300 mm Kwedeyvht Dspfx Abcsw Nozzle height: 965 mm, centered Motor - Fan: 11.0 kW Pre-fuse: 32 A (provided on site) Compressed air connection: 1/2" Operating pressure: 4.5 bar Sound pressure level: 75 dB(A) MP/Powerpack IE3 for Jx/Vx 300 with stepless performance control for energy saving and "boost" function for up to 20% more suction capacity. Consisting of 11 kW drive and frequency converter. BA Vacumobil Jx 250P-350P-DE Weight: approx. 900 kg Dimensions: 3210 x 1030 x 2500 mm Location: Supplier

Condition: used, length ca. 4.000 mm Working height ca. 900 mm Kwjdevn N Ihepfx Abcsw Weight ca. 2.500 kg Return transport / mechanization suitable for Weinig Univar for transporting entire window sashes, panels or similar large workpieces

Condition: good (used), Containers, granule containers, storage tanks, powder containers, paint powder containers, storage containers, silo systems, tanks, silos Kwsdpexvxmlsfx Abcew -Silo system: Granule container on a solid base, stackable -Capacity: approx. 600 liters -Container: Material: Aluminum -Inlet/Outlet: 450 x 450 mm / Ø 200 mm Dimensions: see photos / technical drawing -Overall dimensions: 1190/1180/H1315 mm -Weight: 137 kg

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo Ksdpfoyvqbwox Abcsww • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: Kedpfeyvpyfex Abcsww • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, Image processing system consisting of 5 million pixel B/W camera ( model number CA-H500M) and image processing controller (model number XG-X1500). The set includes cables and a white backlight (model number CA-DSW30). Type: Camera*1 Image pickup element:2/3" B/W CCD image receiving element, 11x high-speed square pixel capture, 5,050,000 pixel Cell size 3, 45 x 3, 45 µm Valid pixel count:4,990,000 pixels 2432 (H) x 2050 (V) Pixel transmission speed: 130 MHz (65 MHz x 2 channels) Scanning system: Full frame (61.2 ms), interlaced (40.3 ms) Kwedjmza Iljpfx Abcjw Transmission system: Digital serial transmission Electronic shutter: 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 0.05 ms to 9000 ms can be set with numerical values. Lens mount: C screw mount

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, For sale is a Cognex camera system for difficult OCR assembly verification and defect detection applications. The system never went into use and is being sold with all accessories as a set as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and is welcome to be researched on the internet. Digital Machine Vision Camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstrator - COGNEX (In-Sight 7000 Gen2 Series) - 7802 - 1600x1200pixels UXGA resolution (1/1.8" CMOS monochrome scanning with global shutter) - 53fps - C-mount type / S-mount type - 7. 2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28Vdc / optocoupler; isolated trigger input) + 3 x digital inputs (15-28Vdc / optocoupler; isolated discrete inputs) + 4 x digital outputs (26. 4Vdc 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (supply) + 12-pin M12 connector (breakout) + Micro SD card slot - supply voltage 24Vdc - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capability - IP67 - aluminum (die-cast) housing - compatible with Patmax redline Ksdpfx Asmx Sl Tebceww

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Kwjdpfxjfiqgrj Abcew Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. Kwodpfjfirx Tsx Abcew We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end D9hnyc97o With over 60 Yes

Condition: new, Year of construction: 2024, Make: DURMA Type: HD-F 3015 III Fiber Year of construction: BEstellbar New (delivery time 6 - 8 weeks) Working range X-Y-Z: 3060x1530x160 mm Laser power: 6000 Watt IPG Control: Siemens Sinumerik 840D Operating hours: 0 h sheet thickness mild steel: 25 mm sheet thickness stainless steel: 15 mm sheet thickness aluminium: 20 mm sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneously: 280 m/min. positioning accuracy: +/- 0,05 mm Repeat accuracy: +/- 0.05 mm installation area l/w/h: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-Focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameters page (performance-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Workspace lighting warning light Multi-chamber extraction system Special Laser Cutting Options Remote maintenance CE Marking Extended equipment IPG fiber laser source 6000 Watt including cooler Filter, Compact dedusting system Vanterm Ksdpfx Aefkpamobcjww Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek Software with positioning - Laser diode with automatic sheet metal position detection, measurement Pierceline Focusline

Year of construction: 2024, condition: new, Machine dimensions: - (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm, - Width with console: 7,700 mm. - Length with filter: 11,000 mm Technical details: - Max. sheet size: 4.000 x 2.000 mm - cutting speed: 12 m/min. - positioning accuracy: ± 0,1 mm - Repeat accuracy: ± 0.1 mm - Power (Hypertherm XPR 170 XD Optimix): 170 A - Cutting area: - Unalloyed steel, piercing, argon: 40 mm - Unalloyed steel, piercing, air: 35 mm - Unalloyed steel, separation cut: 60 mm - Alloy steel, hole piercing: 22 mm - Alloy steel, cut-off: 38 mm - aluminium, hole piercing: 25 mm - aluminium, separation cut: 38 mm Basic equipment: - Control: Durma Aurora CNC controller - Truehole Standard - Sheet metal measurement by laser - Burner height control - AC servo motors for X and Y axis - Software: Lantek, or Metalix Cad/Cam software with Autonesting - 50 pre-programmed part geometries for easy and quick modification. Kwededyfwkepfx Abcjw - consumption kit (burner nozzles, etc.) - Plasma torch - ignition console - Remote - Control: Remote maintenance options are included: - Hypertherm XPR 170 XD + Optimix + automatic gas control - Filter for HPR 170 XD - Safety system with circumferential safety wire - Oxyfuel torch with sensor - Plasma torch - demolition system - Air dryer

Condition: used, Year of construction: 2008, operating hours: 8,000 h, machine/vehicle number: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as roll-fed wrap-around, help reduce labeling costs and improve presentation quality with clean seams and consistent label placement. This configuration is a practical choice for beverage production facilities looking to upgrade or expand capacity while maintaining a compact footprint and streamlined integration into existing conveyors and handling systems. Technical Specifications & Performance Data Manufacturer: SACMI Year: 2008 Label type: OPP foil (roll-fed) Production speed: 12,000 bph (nominal) Bottle formats: 1.5L, 0.6L, 0.33L Container material: PET Kodpfx Aoxvpd Ujbceww Advanced Automation & Control Systems The OPP roll-fed concept leverages hot-melt application at the leading and trailing edges of the label for secure wrap-around results. The design supports stable bottle handling, precise label feed, and consistent cutting for high-quality presentation. Controls are straightforward for operators, with clear access to key adjustments and process parameters to support quick setup and format changes. Production Line Integration Capabilities This labeling machine integrates easily into complete bottling lines and industrial packaging systems. It can operate inline with upstream filling and downstream inspection, packing, or shrink wrapping equipment. Format changeovers accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing multi-product flexibility across beverage portfolios within a single production line. Machine Condition & Maintenance History The unit has approximately 10,000 working hours. It is currently disconnected from the line but can be powered to demonstrate bottle transport. The machine can start and run, with label gluing disabled for demonstration purposes. Technical documentation is available, supporting commissioning, operation, and maintenance. Overall, the machine presents as a well-kept second hand asset suitable for facilities seeking reliable labeling performance at medium speeds. Operational Performance & Versatility Optimized for PET bottle labeling with OPP film, the machine delivers consistent wrap-around application across multiple formats. It is suitable for beverage production scenarios where high presentation quality and material efficiency are important. The roll-fed approach offers a cost-effective alternative to pre-cut labels while maintaining r...

Condition: used, Rotary labelling machine for labelling bottles using two cold glue stations. Manufacturer: KRONES Kwedpfx Aboywckgscjw Model: PRONTOMATIC Year of manufacture: 1991 Capacity: 10,000 bph Carousel: 12 stations Configuration: 2 x heads for cold glue labels Original electrical documentation. Technical condition: used machine, condition as shown in the photos.

Condition: used, Rotary labelling machine for bottle labelling using two cold glue stations. Manufacturer: KRONES Model: BONAMATIC Year of manufacture: 1994 Capacity: up to 10,000 bottles/h Carousel: 12-station Configuration: 2 x cold glue label heads Ksdjywciijpfx Abcjww Operating hours: 31,526 h Original electrical documentation. Technical condition: Used machine, condition as shown in the photos.