Used Lathe Engine for sale (26,402)

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Ndsdjwz Rywopfx Abyjd Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital readout Year of manufacture: 2007 with CE mark 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing over bed: Ø 340 mm Swing over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Compound slide travel: 110 mm Compound slide length: 410 mm Compound slide width: 150 mm Bed slide guide length: 380 mm Tool section: 20 x 20 mm Distance spindle centre – compound slide: 34 mm Compound slide (support) swivel range: 60 / 120° Main spindle: Spindle mount: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40 - 3,000 rpm Infinitely variable speed adjustment Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (basic equipment): 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MT 3 Quill stroke: 120 mm Lateral offset: ±13 mm Permissible workpiece weight (between centers, unsupported): 50 kg, supported with tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and training purposes. Equipment: - EMCO 3-axis digital display with color screen - Potentiometer - Emergency stop button - Digital speed display on control panel next to digital readout - 3-jaw chuck - MULTIFIX tool post, size B - Electrically interlocked chuck guard - Quick-action collet chuck - MICROJET coolant spray unit - Chip guard rear panel - Machine lamp - Machine feet - Bed stop Condition: Very good, from training facility Ndsdpfx Abjxx S R Aeyod Available from March 2026

Condition: used, Year of construction: 1998, Mazak SQT30M CNC Lathe, year 1998, Japan C-axis, driven tools Mazatrol T plus Turning length: 1000mm 12-inch chuck Spindle bore: 98mm VDI50 turret Tailstock Probe Ndodpfjxutcfsx Abysd Chip conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Ndodpfx Ajxd D Rfebyjd Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm Ndodjvtthiopfx Abyjd bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1965, multifix ja centre distance 1500 mm documentation ja Nsdpfx Aoxylq Eobysdd weight of the machine ca. 3 t

Condition: good (used), Code: 0242 Brand: MVM - ITALY Model: T 1500 - CE Standard Professional wood turning lathe with copying device for wood, plaster, composite materials and various - CE Standard Nsdpexykwksfx Abyodd Technical data: Single-phase motor 220 Volt - Kw 2,5 Copying device: the copying device is a unit mounted on the rear bench. It can reproduce weather with wooden samples or with metallic templates thanks to its modern view. It is a practical and manageable tool, it permits large time saving, in batch production or mass production, too. The feed is given by a confortable wheel rotation, the wheel is mounted on the machine fore side Distance between centres mm 1500 Height of centre mm 220 Tool support Spindle revolutions 4 speeds Spindle cone n° 2 Counter centre n° 3 Overall dimensions mm 2350 x 650 x 1200 h Weight kg 325

Condition: good (used), WEILER Precision Lathe MATADOR with HEIDENHAIN 3-Axis Digital Readout Year approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Centre distance: 500 mm Swing diameter over cross slide: 160 mm Spindle nose: DIN 55022 Gr. 5 Spindle bore: 36 mm Spindle speeds: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MK 3 Quill travel: 90 mm Weight: approx. 620 kg Dimensions: 1420 x 700 x 1200 mm Technical data without obligation! Robust leadscrew/feed shaft lathe for workshop use and advanced hobbyists Ndedexx S Hdspfx Abysd Condition: good Equipment: - 3-axis precision digital readout HEIDENHAIN - Quick-action lever collet closer - Electrically interlocked chuck guard - Multifix tool post size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard/rear splash guard - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slide Available from March 2026

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm Nodpfx Abjxx S Tksyjdd spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: new, The Roturn 400 C is a high-performance CNC Slant Bed Lathe designed for precision and efficiency in the category of 2-axis CNC Lathes. This machine exemplifies the robust capabilities typical of the ROTURN C series, featuring advanced Siemens 828 D Basic control technology, which ensures compatibility with current standards. It is equipped with a powerful 15 kW main spindle motor, an 8-station tool turret for rapid tool changes, and a hydraulic 3-jaw chuck with a through-hole. The inclined bed design promotes rigidity and ease of chip removal, while precise linear guides enhance stability under high loads. A hydraulically operated tailstock with 85 mm stroke, automatic central lubrication, and a high-performance coolant system are among the included standard equipment. Buyers can expect a versatile machine that meets complex manufacturing demands. To explore the capabilities of the Roturn 400 C further, request a quote today for this CNC Slant Bed Lathe, and experience the advantages of investing in a quality tool from KNUTH. Nsdpfx Aeu E Hytsbyodd

Condition: excellent (used), L&Z Lathe Njdpfoxyw Rksx Abysdd Manufacturer: Martin Model: KM 200 Swing over bed (SPH): 200 mm Distance between centers (SPW): 1100 mm Forkhardt chuck F 250 Multifix B quick-change toolpost 12 spindle speeds from 31.5 to 1400 rpm Tailstock Morse taper MK 4 Length: 2500 mm Width: 950 mm Height: 1250 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, CNC Cycle Lathe WEILER E50 - 2000 Year of manufacture: 2002 CNC control: WEILER SIEMENS 810D Centre distance: 2,000 mm Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Centre height: 280 mm Spindle bore: Ø 83 mm (optionally 128 / 165 mm) Nsdpfx Abjxx T Sujyjdd Main drive motor: 20 / 17 kW (60% / 100% duty cycle) Speed range: 1 – 2,500 rpm Max. torque: 1,300 – 1,600 Nm Tool turret: Disc turret with 8 stations; VDI 40 shank Tailstock: Quill diameter 80 mm, internal taper MK5 Dimensions / Weight Machine dimensions: 3,850 mm length × 1,850 mm width × 1,750 mm height Machine weight: 4,200 kg Description: The WEILER E50 is a robust, cycle-controlled/conventional CNC-capable horizontal lathe from the E series. With a centre distance up to 2,000 mm and a generous working area (swing diameter over bed approx. 570 mm), it is suitable for heavy-duty turning and series production. The machine features a solid design (wide bed, strong spindle) and is equipped with a disc turret (tool turret) with 8 stations and VDI interfaces.

Year of construction: 2012, condition: reconditioned (used), Conventional Precision Lathe WEILER “CONDOR VC” With Siemens 3-axis digital readout Year of manufacture: 2012 Spindle bore: 56 mm Centre distance: 800 mm Swing over bed: 205 mm Speed range: 30 – 3500 rpm Supplied with the following accessories: Multifix tool holder Chip guard with internal lighting Coolant system 3-jaw chuck Ø 200 mm Chuck guard Ndodpfjxykz Asx Abyod Follow rest Ø approx. 150 mm Tailstock with retractable quill Operating manual

Condition: excellent (used), WEILER Precision Lathe PRAKTIKANT VC, Infinitely Variable Speed Featuring original WEILER 3-axis digital readout Year of manufacture: 2002, with CE certification and stepless speed control Center height: 160 mm Center distance: 650 mm Swing over cross slide: 198 mm Infinitely variable speed range: 30 – 4,000 rpm Speed control: stepless Spindle nose: DIN 55027 size 5 Spindle bore: 40 mm Tailstock quill stroke: 85 mm Tailstock quill taper: MT 3 24 longitudinal feeds: 0.02 – 0.63 mm/rev 24 cross feeds: 0.006 – 0.2 mm/rev Connected load: 6.6 kW Weight: 920 kg Machine dimensions: 1600 x 800 mm Technical data without obligation! Equipment: - Original WEILER 3-axis digital readout Ndsdpfexx R T Aex Abyjd - MULTIFIX quick-change tool post size A - Lever-operated quick-action collet chuck, electrically interlocked - Chuck guard, electrically interlocked - Coolant system - Fixed stop on bed - Machine leveling feet - Lockable tool compartment Condition: Good to very good, from a training workshop Available from March 2026

Condition: good (used), Year of construction: 2024, Ref. -No.: 10605 Manufacturer: VDF WOHLENBERG Type: E 1000 Year of construction: 2024 Type of control: CNC Control: Sinumerik Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX Turning Diameter Over Bed: 1500 mm Turning Diameter Over Slide Rest: 1150 mm Centre Height: 750 mm Centre Distance: 9000 mm Faceplate Diameter: 1000 mm Ndedpfjxxpc Nsx Abyed Spindle Bore: 80 mm Spindle Speed Min.: 1,4 - 280 RPM Turning diameter over cross slide: 800 mm Swing diameter over cross slide: 800 mm Space requirement: 13000 x 2650 x 2250 mm Power Capacity: 320 kW Weight Of The Machine Ca.: 8 t Max. turning diameter (in the offset): 2000 mm Size of the inner cone: metr. Kegel 1:20 quill cone: 80 O

Condition: new, The KNUTH Basic 180 Super is a powerful and robust conventional horizontal lathe, designed for metalworking and known as the largest in its category. With an impressive bed width of 206 mm (8 in) and a total weight significantly heavier than similar models, it assures high machining quality ideal for demanding industrial applications. This metal lathe features a cast-iron bed with induction-hardened box ways, a headstock with D1-4′ mount, and a powerful main drive of 2.4 kW, making it perfect for various turning tasks. The Basic 180 Super comes with extensive standard equipment, including a 3-axis position indicator, quick-change tool holder, and a robust coolant system, ensuring efficiency and precision. You can tackle a wide range of projects while benefiting from the rugged construction that minimizes vibrations during operation. For those looking to invest in top-quality equipment, the Basic 180 Super is a standout choice in the category of conventional horizontal lathes and metal lathes. Request a quote now to enhance your workshop's capabilities with this dependable machine. Ndjdpfjuygz Tsx Abyed

Condition: good (used), Year of construction: 1984, Ref. -No.: 10594 Manufacturer: DECKEL GILDEMEISTER Type: MD 3S Year of construction: 1984 Type of control: CNC Control: ELTRO MPULS Storage location: Halberstadt Country of origin: Germany Turning Diameter: 400 mm Turning Length: 600 mm Swing Diameter: 600 mm Ndsdpexxpcisfx Abyod Spindle Bore: 73 mm

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Ndsdpfx Ajuyg Dnjbysd

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Ndodoxxpblspfx Abyjd Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: new, The Roturn 402 C, a cutting-edge CNC Slant Bed Lathe, exemplifies the robust performance and precision that KNUTH machines are known for. Incorporating the Siemens 828 D Basic control, this CNC production lathe is designed to meet the demands of modern machining technology. Its inclined bed design coupled with an 8-station tool turret and a powerful 15 kW main spindle motor ensures efficient operation and versatility. The machine can handle workpieces with a maximum turning diameter of 400 mm and length of 420 mm. Moreover, it features a reliable hydraulic 3-jaw chuck with a through-hole and a hydraulically operated tailstock, both key for precise machining. The standard equipment package includes a high-performance coolant system, an automatic central lubrication system, and a hinged belt conveyor to facilitate effective chip removal. With its substantial machine frame and precise linear guides, the Roturn 402 C is engineered for stability and accuracy, even under heavy loads. For those seeking a reliable and efficient CNC Slant Bed Lathe, the Roturn 402 C is an excellent investment. Request a quote today to enhance your machining capabilities. Njdsng Ah Rspfx Abyjdd

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement. Ndedpfxexxpa Uj Abyed

Condition: new, The Turnado 230/1000 PRO is a high-performance Conventional Horizontal Lathe from KNUTH, designed for precision and efficiency in your machining tasks. This Engine Lathe represents the modern evolution of classic lathes, boasting features developed over 20 years of successful performance. It offers an ergonomic design that enhances usability, while the sturdy machine bed, solid headstock, and robust cast-iron stand ensure stability and longevity. With infinitely variable speed ranges and a powerful main spindle drive, it guarantees consistent cutting speeds and excellent surface quality, including high-precision pre-loaded spindle bearings for superior concentricity. Equipped with a 3-axis position indicator, quick change tool holder, and a comprehensive standard equipment package, this machine simplifies maintenance and maximizes productivity. Experience the next generation of lathe technology; request a quote today for the Turnado 230/1000 PRO and elevate your workshop with this reliable Engine Lathe, a benchmark in the Conventional Horizontal Lathes category. Ndsdpfx Abjngzzkeyjd

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Njdpfjxxpa Iox Abyodd Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Ndsdpfx Abjxxpabsysd Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Nsdpfxjxxn U Re Abyedd Number of tool stations: 12 pc