Used Lead Screw Lathe for sale (11,315)

Condition: good (used), Center distance: 800mm Kwodjukrtnopfx Abcow Spindle clearance: 38mm Center height: 165mm Turning diameter over bed: 330mm Turning diameter over slide: 170mm Speed: 24-2800 Dimensions: 1600mm x 600mm x 1250mm Weight: 850 kg

Condition: good (used), functionality: fully functional, Used TOS SUI 50 - 1500 lathe with extensive accessories for sale For sale: robust and precise TOS SUI 50 - 1500 lathe – ideal for workshops, metalworking, and ambitious hobbyists. 🔹 Distance between centers: 1500 mm 🔹 Swing over bed: 500 mm 🔹 Spindle speed: 14 – 2240 rpm Kwjdpfxowu Dn Io Abcsw 🔹 Spindle bore: 56 mm 🔹 Dimensions (LxWxH): 3000 x 1300 x 1500 mm 🔹 Weight: approx. 2.9 tons ✅ The machine is used, but in technically good condition and ready for immediate use. 📍 Location: Werdau 📅 Inspection possible – simply arrange an appointment! If you're interested, just get in touch – preferably by message or phone.

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Kjdpsw Rcrcofx Abcsww Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: 3-jaw chuck Quick-change toolholder system Multifix

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder Kedpfx Abov Tli Sjceww -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder Kwodpfov Tlkpox Abcew -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Ksdpfovn Svuox Abceww Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: good (used), Centre height: 290 mm Swing diameter over bed: 580 mm Centre distance: 3000 mm Weight: 2800 kg Kedpfx Absxtu Erjcjww Equipped with a ZIMMER DY 75 flat belt grinder, year of manufacture 2010, e.g. for shaft or tube grinding Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Kern lathe D 23 V with Forkard lathe chuck Multifix B digital display Kodpovl Ig Dofx Abcsww

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, turning diameter: 630 mm, - Complete overhaul of the machine (description of work see below) - New electrical installation in CE-compliant version: chuck guard Ø 315 mm with limit switch, front chip guard on the carriage, rear movable guard, leadscrew cover - Accuracy certificate - Electrical installation inspection protocol - Delivery: immediately Key Features: - Simple and ergonomic operation - Hand scraping of critical machine parts – high machining precision - Long service life - Low operating costs - Low maintenance requirements - Capability for cutting various thread types with wide pitch range Technical Specifications: Working Area: Swing over bed: 630 mm Swing over carriage: 340 mm Swing in gap: 880 mm Effective gap length from spindle face: 300 mm Distance between centers: 2000 mm Center height above bed: 315 mm Bed width: 450 mm Spindle: Speed range: 10–1000 rpm Number of speed steps: 16 Spindle nose: Bayonet B8 Spindle bore: 71 mm Internal taper: Metric 80 Slides: Cross slide travel: 400 mm Compound slide travel: 180 mm Max. tool size: 40 x 25 mm Longitudinal feed range: 0.05 – 6.4 mm/rev Cross feed range: 0.025 – 3.2 mm/rev Rapid longitudinal feed: 3000 mm/min Rapid cross feed: 1500 mm/min Compound rest swiveling angle: ±90° Tailstock: Quill diameter: 90 mm Quill stroke: 240 mm Kodpfxoyf Dnue Abcsww Quill taper: Morse 5 Transverse offset: ±10 mm Thread Cutting: Metric threads (number/pitch): 29 / 0.5 – 40 mm Whitworth threads (number/pitch): 35 / 1–80 TPI Modular threads (number/pitch): 26 / 0.25–20 mm Diametral pitch threads (number/DP): 31 / 2–72 DP Drives: Total power input: 15 kVA Main drive motor: 11 kW Coolant pump: 0.1 kW Rapid traverse motor: 0.95 kW Dimensions: Total length: 4000 mm Width: 1440 mm Height: 1100 mm Weight: 2940 kg Operating Data: Supply voltage: 3 x 400 V ±10% Frequency: 50 Hz ±2% Achievable machining accuracy: IT7 Spindle nose: Bayonet B8 Spindle bore: Ø 71 mm Square turret Electrical system for 3 x 400 V / 50 Hz, circuit breaker equipped Slide box controls on right side Gap for increasing swing over bed to 880 mm for 300 mm from spindle face Rapid traverse Tailstock Main drive 7.5 kW Swarf tray + coolant system LED machine lighting Supply line in armored hose Folding handle for X axis Folding handle for Z axis Color – RAL 7035-3 / 7016-3 / 6153 Set of change gears for thread cutting Shear pin, 3 pcs

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 192.6155-06, spindle bore: 62 mm, turning diameter over bed slide: 270 mm, center width: 1,150 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to a business closure. Placing a bid obligates the buyer to collect the item within the specified pickup window: January 26, 2026 to January 29, 2026. TECHNICAL DETAILS Swing diameter over bed (max.): 485 mm Turning length (max.): 1,000 mm Swing diameter over cross slide (max.): 270 mm Distance between centers (max.): 1,150 mm Spindle bore diameter: 62 mm Internal taper, metric (max.): 70 mm Maximum tool shank size (W x H): 25 x 25 mm Leadscrew: 6 mm Tailstock quill taper: Morse 5 Manual quill travel (max.): 119 mm Cross-slide travel from center position (max.): 110 mm Spindle speed range: 11.2 – 2,240 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,000 x 1,600 mm Kodpfxsxqg Aks Abcsww Weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change tool holder 3-jaw chuck, diameter: 250 mm, Manufacturer: FORKARDT Multifix tool holder, type: BD 25140 Multifix tool holder, type: BD 25120 Turning tools Steady rest (diameter approx. 150 mm) 4-jaw face plate, diameter: 450 mm

Condition: excellent (used), functionality: fully functional, Schaublin 135 High Precision Lathe with 3-Axis Digital Readout (ELESTA) and Accessory Cabinet in Excellent University Condition! Technical Data: - Centre Height: 135 mm - Distance Between Centres: 630 mm - Swing Over Bed: 315 mm - Spindle Nose: Camlock D1-4 - Spindle Bore: 40 mm - Longitudinal and Cross Feeds: 0.025–0.35 mm/rev - Metric Threads: 0.25–14 mm - Tailstock Taper: MK3 - Infinitely Variable Speeds: 55–3000 rpm - Total Power Requirement: 4.45 kW - Weight: approx. 1,200 kg Accessories: - 3-Axis Digital Readout (ELESTA) with Heidenhain Scales - Accessory Cabinet including: - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix B, 3 tool holders - Internal and external quick-change collet system - Change gears - Eccentric chuck - Faceplates - Fixed and travelling steadies - Coolant system - Centre points - Operating manual - And much more About the Machine: Kedpjx Hivnjfx Abcjww For sale is a Schaublin 135 high precision lathe. The machine is in very good condition, comes from a university, and has seen very little use. It is equipped with a 3-axis digital readout and a wide range of accessories. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: new, – Distance between centers: 1000 mm – Swing diameter over bed: 410 mm – Swing diameter over gap: 580 mm – Swing diameter over cross slide: 255 mm – Spindle bore: 52 mm – 45/1800 rpm – Longitudinal and transverse feed – Digital readout – Brake – Coolant system – Multifix with 4 tool holders – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation Kedew S Ikmepfx Abceww – 400V

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Kwsdpfjx Eb A Ujx Abcjw >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: good (used), Leadscrew and feedscrew lathe type Celtic 12 Centre height: 160 mm Centre distance: 500 mm Spindle speeds: 35 - 1560 rpm Multifix tool holder A Lathe chuck Live centre Kwodex Dy U Tspfx Abcjw

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital display Centre height: 150 mm Swing over bed: 300 mm Distance between centres: 1000 mm 3-jaw chuck, Tool holder Kwedox Eah Aopfx Abcjw Chip guard Chip tray

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A Kwsdopz Hubopfx Abcew - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Kwsdpfx Abev D Ip Nocsw Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B Kwodpfx Aemgaddsbcew - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Kwedpfjhy Tdyex Abcew Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Kwedpfxeg R S Rce Abcjw Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: excellent (used), Year of construction: 1995, Digital display Kedpfjwhrg Sex Abcoww Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck Kwodpfxexyh Nde Abcow >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch Kwedpfx Absu Aftgecsw >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm Kwedpfovtp Edex Abcow >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake Kjdpsvivmyjfx Abceww >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.