Used Length Measuring Device for sale (39,736)

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg Lredpfx Aey A Tpqekfsk - immediately available -

Year of construction: 2003, condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press Lredpfxsyt Ncms Akfok -Manufacturer: WIMO Lifting Technology -Turning device: simultaneous turning of several stacks of circuit boards, or rotation of workpieces -Loading: loading and unloading from the front with a forklift -Maximum internal width: 4000 x 1700 mm -Maximum internal height: 580 mm -Minimum internal height: 250 mm -Load capacity: 6000 kg -Transport dimensions: 5960/2400/H2435 mm -Weight: 9000 kg

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 Lrsdpfx Akeiyyc Eefek 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Lsdpfoyqr Sxsx Akfork

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 22320321, total height: 2,300 mm, total width: 1,200 mm, total length: 1,300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 300 mm, overall weight: 1,000 kg, Equipment: documentation/manual, MITUTOYO CRYSTA-PLUS M 574 coordinate measuring machine - incl. granite measuring plate Lrjdjym R S Njpfx Akfok - plate dimensions: 1200 x 840 mm - incl. documentation, calibration sphere, probe, and hardware Attention: The item must be definitively collected between 21.04. and 30.04.2026, on a date yet to be agreed upon. FCA D-96257 Marktgraitz – loaded on truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 9B810117, total height: 700 mm, total width: 700 mm, total length: 800 mm, overall weight: 150 kg, KEYENCE XM - T 1000 3D Coordinate Measuring Machine - incl. measuring head, Type: XM C 1000 - Camera: 4 megapixels, CMOS image sensor - Central wavelength of light reception: near infrared, measuring range: 300 x 250 x 150 mm - Smallest display unit: distance 1µ, angle: 0.0001° - Measuring repeatability with locked measuring table: ±3µ Lrjdpfx Aeym R R Sskfsk - Measurement deviation with locked measuring table: ±8µ - Maximum load capacity: 25 kg - Number of probes: 1 - incl. handheld probe Note: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon. FCA D-96257 Marktgraitz - loaded onto truck

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools • Easy operation • Length and diameter measurement Lredpjw Humljfx Akfjk Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: used, Year of construction: 2020, functionality: fully functional, measuring range X-axis: 3,000 mm, measuring range Y-axis: 3,000 mm, total height: 400 mm, total width: 800 mm, total length: 800 mm, overall weight: 50 kg, input voltage: 220 V, Equipment: documentation/manual, type plate available, Mobile coordinate measuring system KEYENCE WM-3000 (Wide Area Coordinate Measuring Machine). Lrsdpfxjy E Rv Hs Akfjk The system was delivered in November 2020 and is in well-maintained, fully functional condition. This is a complete measuring system including accessories, software, and transport cases. Scope of delivery • WM-3000 measuring head • WM-P3000 probe • WM-C3000 control/camera module • WM-S1 camera tripod • 3x WM-B1 batteries • WM-BC1 charger • OP-99032 power cable • Laptop with installed WM measuring software • Transport cases • Calibration certificate (09/2020) • Inspection report (Inspection Result) Condition • Fully functional • Visually well-maintained • Calibration from 09/2020 (factory recalibration recommended) • Sold from ongoing operations The WM-3000 is an optically guided 3D coordinate measuring system for large-volume measurement of components in the range of 300 mm to 3,000 mm. Measurement is performed using an active probe with camera tracking. Suitable for manufacturing, toolmaking, plant engineering, and quality assurance.

Condition: good (used), Year of construction: 2002, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, Type: Coordinate Measuring Machine Manufacturer: Mitutoyo Model: CRT-A 122010 Year of Manufacture: 2002 Serial Number: N0001301 Includes PC and software, probe set (as shown in photos), JSBOX-M Type A control unit, Renishaw measuring head (PH10MQ, TP200), and UC240H controller. A set of transport locks is supplied with the machine. Last calibration: 12.09.2024 CRYSTA-Apex C 122010 – Technical Description The CRYSTA-Apex C 122010 is a high-precision coordinate measuring machine (CMM) designed for inspecting medium- to large-sized components. The system features a configurable design for increased rigidity and is also available with vibration isolation for accurate measurement of heavy workpieces. Measuring range (X/Y/Z): 1,205 × 2,005 × 1,005 mm Measuring error (MPEE): 1.9 + 3L/1000 µm (standard accuracy) Operating temperature range: 18 – 22°C Configuration for heavy workpieces (optional vibration isolation version): Lrsdpoyzxcyofx Akfek - Suitable for measuring workpieces up to approx. 5 tons - Reinforced base structure for enhanced rigidity - Integrated vibration isolation system Extended specifications (heavy-duty configuration): - Maximum workpiece weight: approx. 11,023 lbs (5,000 kg) - Machine weight: approx. 17,196 lbs (7,800 kg) - Air supply requirement (vibration isolator): approx. 0.45 MPa (minimum 0.55 MPa supply) This machine is particularly suitable for applications such as mold and automotive component inspection, where high precision and stability under heavy loads are critical. No guarantee; data according to OEM datasheet.

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min ratio total power requirement 0,4 kW weight of the machine ca. 20 kg dimensions of the machine ca. m for Reishauer RZ 400 and other models. Ledsunt Easpfx Akfjrk

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar Lrodpjwgizwjfx Akfjk coolant capacity 2900 l Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Ljdpovf Riusfx Akferk Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: excellent (used), Year of construction: 2013, liter capacity 300 l Ljdpfx Aexxmm Sjkfork feed pressure 18,5 bar coolant capacity 2800 l Filter capacity 1,5 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: excellent (used), Year of construction: 1999, max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,5 - 10 pressure angle 15 - 25 ° turning speeds 2800 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Ledpfevibc Hex Akfsrk Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, AM, ... Adjustment plate on the right with micrometer screw adjustment axial Radial adjustment plate with micrometer screw adjustment 2 precision motor spindles to absorb the diamond discs.

Condition: ready for operation (used), Year of construction: 2018, An electric plate vacuum lifting frame Framatech with tilting function is available, load capacity: 2000kg, suction frame dimensions X/Y: approx. 1200mm/2400mm, suction pads: 16, suction pad diameter: 290mm, dead weight: approx. 400kg, documentation available, an on site inspection is possible. Lsdjy E S Dxepfx Akferk

Condition: excellent (used), I offer a professional hydraulic rescue device from the renowned company LUKAS, model LSP 44 B. The equipment is used in rescue operations (e.g., fire brigade) and is distinguished by its very high build quality and reliability. Technical condition: The device is fully functional, tested, and ready for operation. It shows normal signs of use as visible in the photographs. Ledpfoyxrbdox Akfjrk Technical specifications: Manufacturer: LUKAS / FAG Kugelfischer Model: LSP 44 B Type: DSH-20-2 Power supply: 230 / 240 V Motor: Leroy Somer, approx. 1.1 kW Country of origin: Germany Set includes: Hydraulic power unit Hydraulic hoses Hose reel Working element as shown in the photographs Application: Technical rescue Fire services Emergency services Hydraulic work

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Lsdpfx Akjt T Uavjfjrk

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AFMAAAABABAA+, The Coriolis Mass Flowmeter Proline Promass 83F, manufactured by Promass in 2011, is a precision instrument designed for accurate mass flow measurements in various industrial processes. This model, designated as 83F1H-3967/0 with serial number E710E302000, has a nominal size of DN100 (4 inches) and is equipped with a hygienic process connection DN100 DIN 11851, making it suitable for applications requiring sanitary standards, such as dairy processing. Constructed from high-grade stainless steels 1.4404/316L and 1.4539/904L, the device offers durability and corrosion resistance. It is rated for a nominal pressure (pnom) of 25 bar and operates in a process temperature range from -50°C to +200°C, with an ambient temperature tolerance from -20°C to +60°C. The flowmeter's housing features IP67 and NEMA/Type 4X protection ratings, ensuring resistance to dust and immersion in water. Sensor calibration includes a K factor of 1.6287 / 51 and a density accuracy of 0.0005 g/cc. The surface finish meets hygienic standards, featuring a roughness of 0.8 µm (150 grit). Lredpfxjy Anhzs Akfjk The unit is powered by a voltage range of 20-55 VAC or 16-62 VDC, consuming 15 VA/W at a frequency of 50-60 Hz. The housing shows some surface wear and minor dents, and the label exhibits slight wear but remains mostly legible. It is mounted on a wooden pallet and is equipped with attached braided cables with yellow markings and black cable ties. Some dust accumulation is visible on the flowmeter body, indicative of prior use. This Promass 83F flowmeter is suitable for precision mass flow measurement in the pharmaceutical, chemical, and food industries, particularly where hygienic conditions are required.

Year of construction: 2020, condition: used, machine/vehicle number: 70066220, Model: 191-125, with 1 motorized swivel head RENISHAW PH10MQ, 1 control unit RENISHAW PHC10-3 PLUS, 1 control unit MITUTOYO UC480-2, 1 hand controller MITUTOYO JSBOX-M2 (JR24), 2 probe changer systems RENISHAW FCR25, each 3-position, with RENISHAW aluminium frame, various accessories Lodpfx Ajyztiujkfork

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 3164, TESA Scan 50 plus – Optical/Tactile Shaft Measuring Machine Year of manufacture: 2005 · Diameter range: 0.5 – 50 mm · Measuring length up to 500 mm · Resolution: 0.1 µm · Complete with Dell PC, monitor, keyboard, and mouse TECHNICAL DATA • Manufacturer: TESA (now part of Hexagon Metrology) • Model: Scan 50 plus • Year: 2005 • Measuring principle: Combined optical + tactile (contactless and tactile measurement) • Diameter measuring range: 0.5 – 50 mm • Length measuring range: 500 mm • Diameter resolution: 0.1 µm • Length resolution: 0.5 µm • Diameter error limit (20 °C ± 1 °C): 1 + D[mm] / 100 µm • Length error limit (20 °C ± 1 °C): 4 + L[mm] / 100 µm • Diameter repeatability: 0.5 µm • Length repeatability: 2 µm • Max. workpiece (D × L × m): 100 mm × 515 mm × 6 kg • Space requirement: approx. 1.3 × 0.8 × 1.2 m • Device weight: approx. 180 kg • Item no.: 3164 SOFTWARE • Pro-Measure (licensed) • Pro-Composer (licensed) SCOPE OF DELIVERY • TESA Scan 50 plus measuring device • Dell control PC • Monitor • Keyboard • Mouse CONDITION & HIGHLIGHTS Pre-owned device, fully functional • Precision measuring device from ongoing production • Software Pro-Measure / Pro-Composer included (licensed) • Ideal for turned parts, shafts, precision journals, and rotationally symmetric test parts • Supplied complete with Dell PC, monitor, and input devices – ready for immediate use MARKET COMPARISON Original purchase price approx. €40,000. ABOUT THE DEVICE The TESA Scan 50 plus is a high-precision optical-tactile shaft measuring machine for measuring rotationally symmetric workpieces such as shafts, turned parts, precision journals, pins, and similar test pieces. The device combines non-contact optical measurement with tactile probes, achieving a resolution of 0.1 µm for diameters and 0.5 µm for lengths. Lredpfxoy Eqlxj Akfjk TESA (Switzerland) is now part of the Hexagon Metrology Group – a world-leading supplier of industrial metrology solutions. The Scan 50 plus is typically used in quality control labs, metrology departments in fine and small batch production, as well as in research and development. LOCATION & TRANSPORT Location: Central warehouse at Auktionshaus Köck, 6178 Unterperfuss, Austria. Self-collection or shipping by freight forwarder by arrangement. Transport costs on request. All information is provided without guarantee. Used device – sale is made to the exclusion of any warranty. Errors and misprints excepted.

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood. Features automatic feed and return of the saw carriage, continuously adjustable feed advance, saw blade height, and cutting length. Equipped with a pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, 3-phase brake motor 6.8 HP / 5 kW and scoring unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm. The machine is in good condition and ready for immediate use, located at Neustadt/Weinstr. Lodpfx Akeyzxkwofsrk Transport available at extra cost!

Year of construction: 2025, condition: new, functionality: fully functional, Lifting capacity up to 250 kg Lrsdpfx Aovrci Tokfek Roll width up to 500 mm Universal compatibility – Works with most printing and converting machines Safe & maintenance-free We would be happy to provide you with a detailed offer.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 400181806, Mitutoyo CV-3200H4 CONTOUR MEASURING CONTRACER; MFG: 2018, code no.: 218-482-10D, SN: 400181806, made in Japan. Expands measurement range while reducing workpiece interference Mitutoyo’s newly designed detector arm lowers workpiece interference while expanding the measurement range in the Z1 axis (detector). Auto stop feature assures safety even during high-speed movement The detector includes a safety mechanism (auto stop upon collision) to assure measurement safety even during high-speed movement. If the arm is removed or shifts during measurement, the safety mechanism is triggered and stops the machine. Measuring range: X axis -100mm Measuring range: Z2 axis (column) travel range 3 - 60mm (±30mm in horizontal situation) Z2 axis (column) travel range 3 - 500mm Detector (Z1 axis (detector unit)) Scale unit - Arc scale Resolution 0.04µm Stylus up/down motion: arc movement Measuring direction: both pulling and pushing directions Measuring face direction: downward or upward Measuring force: 30mN (by adjusting weight) Stylus traceable range: Ascent 77°; Stylus traceable range: Descent 83° (with one-sided cut stylus: standard accessory); Drive unit Scale unit Separate type linear encoder Z2 axis (column) ABS encoder Resolution X axis 0.05µm Resolution Z2 axis (column)1µm Drive speed X axis 0 – 80mm/s and manual operation Lrodewz Sxnjpfx Akfsk Drive speed Z2 axis (column) 0 – 30mm/s and manual operation Measuring speed X axis 0.02 – 20mm/s; Straightness (when the X axis is horizontal) X axis 0.8µm/100mm X axis inclination angle: X axis ±45° Accuracy (20°C) CV-3200 X axis ±(0.8 + 0.01L) µm L = Drive length (mm) Wide range: 1.8µm/100mm Narrow range: 1.05µm/25mm; Accuracy (20°C) CV-3200 X Z1 axis (column) ± (1.4 + | 2H | /100) µm H = Measurement height from the horizontal position; External dimensions (W×D×H): Main unit: 756×482 ×1166mm External dimensions (W×D×H): Controller: 221×344×490mm External dimensions (W×D×H): Remote box: 248×102×62.2mm Mass: Main unit: 150kg Mass: Controller: 14kg Mass: Remote box: 0.9kg Operating temperature range: 15 – 25°C (within ±1K temperature fluctuation on calibration and measurement) Operating humidity range: 20 – 80%RH (with no condensation) Rvcunpih32 Storage temperature range: −10 to 50°C Storage humidity range: 5 – 90%RH (with no condensation) Price Euro 15.900 Euro + VAT, negotiable, ExWorks Simeria, Romania. Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: used, Year of construction: 2006, Used, in excellent condition Low operating hours Ex-government unit Manufacturer: Alko Model: Power Unit 300 P Year of manufacture: 2006 Clean air unit / negative pressure GS dust certified CE type tested Motor 7.5 kW Lrsdpsx Nqvhjfx Akfek Connection diameter 300 mm Pressure 2,400 Pa Airflow 6,000 m³/h Collection drums 900x600 mm Filter area 30 m² Automatic/pneumatic filter cleaning Filter pressure monitor Soundproofed Integrated extinguishing system Original price approx. 19,545 EUR Space required approx. 3,000x1,058x2,361 mm Weight approx. 880 kg Storage location: 97447 Gerolzhofen, loaded free, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness steel (max.): 1 mm, number of blades: 5, working width: 1,250 mm, number of feed rollers: 2, FORSTNER MST 1250 Longitudinal Slitting and Sheet Cutting Machine The machine is in very good condition and fully operational. Designed for longitudinal slitting and cutting into sheets. It is currently connected - can be tested on site. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to mount up to 7 pairs. Control – Siemens SIMATIC touchscreen panel. Full documentation (PDF) included. Specifications: Model: FORSTNER MST 1250 Made in: Austria Year: 2010 Working width: 1250 mm Thickness: up to 1.0 mm Slitting knives: 5 pairs Shearing: circular shears Controller: Siemens SIMATIC panel Lrodex R Sk Nopfx Akfjk If you have any further questions, we will be happy to answer.