Used Length Meter for sale (33,225)

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Iijdpfxsz Aquhs Aiyeg Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 3,700 h, power: 18 kW (24.47 HP), load capacity: 570 kg, empty load weight: 3,764 kg, Equipment: all wheel drive, Total of 9 diesel-powered, all-wheel-drive scissor lifts, JLG 260MRT model. All manufactured in 2008. Operating hours according to the meter range from 772 to 4,644 hours. 3,764 kg own weight 570 kg lifting capacity 18 kW Kubota engine Iiodjzh U Ddopfx Aiyeg 9.92 meters working height Work platform is extendable in length ALL-WHEEL DRIVE with outriggers and automatic leveling immediately ready for use including CE certification Selling price: €7,700.00 net per unit! Upon request, a new Austrian inspection certificate can be provided before delivery! Affordable delivery also possible!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,050 kg, KUKA KRC4 linear axis – a high-precision, robust motion unit designed for industrial applications. Provides accurate control of movement sequences and serves as a central component in automation processes and robotic systems within production environments. Durable construction ensures consistent, reliable performance even under the most demanding conditions. Iiodew I Ez Ijpfx Aiyog Linear Track Model: KL 1500/3T LINEAR UNIT 8 METER Year: 2013 Controller Cabinet: KRC4 Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. ( Source: Kuka's Website )

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Iisdpfx Aez Aplxsiysg Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Iedpsy Rnb Dofx Aiysig

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, overall weight: 4,700 kg, TONGTAI TOPPER TNL - 100 / CNC lathe / Fanuc OT control -CE marking -Fanuc OT control -TOOL EYE - tool measurement system -Max. turning diameter 390mm -Max. turning length 580mm -Bar capacity 51mm -Axis travels X / Z 200 & 600mm -Rapid traverse rate X / Z axis 20 & 24 m/min -Spindle bore diameter 62mm -Spindle speed range 45 - 4500 rpm -Turret 12 stations -Tool shank 25mm -Tool holder diameter 32mm Ijdpfx Aszyz U Tjiyjig -Spindle motor 15 KW -Tailstock -Foot switch -Machine feet -Chip conveyor -Complete documentation Dimensions L x W x H 2.6 x 1.8 x 2 meters / Weight 4700 Kg Errors and omissions excepted.

Condition: good (used), Year of construction: 2004, Laboratory roller kiln for firing ceramics and porcelain stoneware. Kiln from the Spanish company TAI - TECNOLOGIAS APLICADAS A LA INDUSTRIA. Kiln length: 10 meters. Iiodpfxoxu Nz De Aiyeg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components Iodsz A D H Uepfx Aiysig - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las Ijdewrp Emopfx Aiyoig

Year of construction: 2018, condition: like new (used), functionality: fully functional, WALTER TD500 KBA Circular Saw | Year 2018 | CE | After Inspection | Very Good Condition | KALISZ WALTER TD500 KBA circular saw – a robust and efficient machine designed for longitudinal trimming of round timber. The unit is in very good technical condition, has undergone inspection, and is ready for operation. This machine is ideal for sawmills and wood processing plants, providing high performance and precise cutting. TECHNICAL SPECIFICATIONS: - Manufacturer: WALTER - Model: TD500 KBA - Year of manufacture: 2018 - Condition: very good - After technical inspection - CE certificate - Operating manual included - Infeed table: 6 m (3 m standard + 3 m extension) - Main motor power: 22 kW or 30 kW - Feed motor: 1.5 kW - Length of infeed table: 6000 mm - Maximum log diameter: 350 mm - Minimum log diameter: 60 mm - Adjustable feed speed via frequency inverter - Feed speed range: 0–25 m/min - Two rows of pawls - Saw blade diameter: 500 mm - Spindle diameter: 70 mm - Spindle support - Chip conveyor - Three receiving rollers - Suction ports: 2 × 200 mm Machine advantages: - Renowned manufacturer WALTER - Very good technical condition - After inspection – ready for operation - Long, 6-meter infeed table Isdpsz A Aytefx Aiyjig - Smooth feed speed adjustment via frequency inverter - High performance and durable construction - Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Lublin Voivodeship It is possible to test the machine on site. Financing options are available through leasing or installments. WE ORGANIZE TRANSPORT.

Condition: used, ML-1100 Year: 2012 Maximum Sheet Size: 1100 × 800 mm Maximum Die-Cutting Size: 1100 × 800 mm Iedpfx Aijz Dh T Uoyjig Inner Chase Size: 1100 × 800 mm Working Speed: Approximately 20–23 strokes per minute Maximum Rule Length: Up to 30–35 meters, depending on manufacturer and version

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: S120598-5-10, STOPA Storage System – 66.15 m Length – 850 Pallet Positions – Year 2014 – Excellent Condition We are offering for sale a high-performance industrial pallet storage system by STOPA, serial number S120598-5-10. System specifications: - Total system length: 66.15 meters - Total pallet positions: 851 - Actual usable pallet positions: approx. 500 - Platform dimensions: 3000 x 1500 mm per level - Number of towers: 33 - Pallet slots per tower: 29 - Loading/unloading stations: 11 - Minimum required installation ceiling height: 9.4 m - Year of manufacture: 2014 - Condition: Very good – clean, maintained The system is currently disassembled and stored indoors at a warehouse in Piaseczno, Mazowieckie, Poland. Live demonstration is not possible, but the system was fully functional at the time of disassembly. Complete technical documentation is available. Loading and transport assistance can be provided. Reason for sale: change in warehouse layout concept. Iijdpfx Aiew Eb N Deyeg This is a premium solution for companies seeking to expand or modernize their pallet storage capacity with a reliable, high-capacity system. For further details, photographs, or to arrange an inspection, please contact us.

Condition: like new (used), 600 linear meters of STOW pallet racking, like new 🧰 Product Features • Color: Frame galvanized / Beam yellow • Load capacity: o Field load: 12,000 kg o Shelf load: 2,400 kg per level/evenly distributed load + 216 frames, height approx. 5500 mm, depth 1100 mm + 1290 beams, 2700 mm length, 2400 kg load capacity/with evenly distributed load + 2580 safety locking devices + 864 concrete anchors M12 x 110 mm for fastening 💰 Price / €48,100 net, excluding VAT Matching wire mesh decking available upon request • Other heights and quantities available upon request • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: Available immediately • Inspection and pickup: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. Iijdpfx Aiswnf Hreyeg (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excluding VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel structure platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Warehouse Technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Flat-rate purchase: Purchase of merchandise, equipment & complete warehouse stocks including thorough clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and thorough handover. Whether you have become aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm Ijdpef Epzgofx Aiyoig There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Iiodpfx Aezx Uwxeiyog Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop Iijdpozvx A Tjfx Aiyog -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Iiodezgcy Depfx Aiyog Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, nominal power: 9 kW (12.24 HP), overall weight: 2,100 kg, type of input current: three-phase, The Crossline 650 automatic cut-off saw is equipped with a rotating table and a 650 mm diameter saw blade that can rotate +/-70°. Material inserted into the machine is automatically detected, and its length is determined. The material is then fed using a push-type clamping device. Cutting accuracy is ensured by two independent upper and side clamping devices. Once the material is firmly clamped, the saw blade rises for cutting. After cutting, the material is pushed onto the output table. The machine can operate in manual mode or automatically, connected to the WinCreator software or with data from other commonly used programs. Iijdpfjzz A Iwsx Aiyog Crossline 650M The Crossline 650M is equipped with a grooving module. Its use is intended for situations where the production of trusses needs to be combined with cutting material for wall panels, ensuring precise positioning of studs and components in the structure. Thanks to its functionality, the Crossline 650M is an efficient, comprehensive solution and is often an alternative to complex machining centers in the prefabrication of wood-based panels. Groove width max. 60 mm (depending on the tool). Technical data for Crossline 650 and 650M: Industrial PC Beckhoff with 12" touch screen Saw blade Ø 650 mm, 2800 rpm, motor 7.5 kW Blade stroke adjustment Cutting accuracy ± 0.5 mm/meter Feed rate 0-60 m/min Automatic material measurement Cutting diagram for Crossline 650, 650M

Condition: used, empty load weight: 2,960 kg, overall weight: 16,000 kg, first registration: 03/2020, Krone box swap body | 2960 kg unladen weight | 7.30 meters interior length | 2.5 meters interior height | Rental possible | Immediately available | Price per unit! | Subject to error, input mistakes and prior sale. Isdpfezwwygex Aiyeig

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 3,500 mm, frame height: 3,500 mm, frame width: 1,100 mm, 25 linear meters of Nedcon pallet racking 🧰 Product features • Manufacturer: NEDCON • Color: galvanized / blue / orange • Condition: new, see photos • Frames: 10 units, pre-assembled 350 x 110 cm • Beams: 36 units, with 270 cm clear span, box profile 110 x 40 mm • Safety: 72 units of galvanized safety pins • Fasteners: 40 units of Hilti concrete anchors • Load capacity: 3,050 kg per level • Field load: 12,000 kg • Load capacity label: included Over 5,000 linear meters in stock Frame heights up to 7 meters Available beam lengths: 182.5, 270, 330, and 360 cm Matching deep uprights, filler grates, and filler shelves available upon request 💰 Price: €2,980,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by arrangement • Product number: P2835 Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology throughout the DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner Iisdpefi U Aijfx Aiyeg 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance projects, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including clean-out. 2. Commission auction: Carrying out auctions on behalf of the client. Our full-service by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and clean handover. Whether you found us through a heavy-duty racking search engine or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Iodpfx Asy Au Aleiyeig Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: BO 15263, total width: 2,300 mm, total length: 2,300 mm, total height: 1,700 mm, travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, grinding diameter: 150 mm, grinding length: 500 mm, input frequency: 50 Hz, Equipment: documentation/manual, J&S 1096 grinder: issues with the CNC control system. Iedpfsz Dgphox Aiysig

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg Iiedpfjz Ahq Tox Aiyeg The price is ex works; we can arrange loading. We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 3 kg, first registration: 09/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP SKIP LOADER CONTAINER FOR BULKY WASTE, WITH REAR OPENING AND TWO DOUBLE-DOOR ACCESS, NEWLY REPLACED FLOOR REF: 26-U-112 TYPE: Bulky waste NEW: No LID: No OPENING: Rear, with two double-doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.20 m EXTERNAL BOX WIDTH: 2.50 m FRONT SIDE INTERNAL / EXTERNAL: 1.60 m / 1.80 m REAR SIDE INTERNAL / EXTERNAL: 1.60 m / 1.80 m SIDE INTERNAL / EXTERNAL: 1.60 m / 1.80 m CUBIC METERS: 23 WEIGHT: 2620 kg FLOOR THICKNESS: 3 mm + 4 mm WALL THICKNESS: 3 mm COLOR: Yellow and blue Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales department for an updated price and conditions comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS Iijdpfezqprhox Aiyeg operates in the sector of sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and skip loader equipment. With a stock of over 50 trucks and over 150 containers, with and without cranes, available for immediate delivery. S.E.&O Given the amount of information and details provided, Aurora invites customers to verify the accuracy of the data with the sales staff.

Condition: ready for operation (used), Year of construction: 2019, A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200l/h. 5) Sensor: Optimass 6000-S15, connection DN25 Tri-Clamp, installation length: 480mm, max. measuring range: 0l-1500l/h. Position 5 was installed solely for testing purposes. Documentation available. An on-site inspection is possible. Isdpfx Aeyiflajiyoig