Used Lever Punch for sale (2,895)

Year of construction: 2024, condition: ready for operation (used), A Zeibig dough mixer overhauled in 2024 is available. Bowls: 2, Capacity: 160kg, Bowl rotation: positive drive. An on-site inspection is possible. Todpfxoznmywj Amksa

Condition: used, pressure 40 t Tjdjyv Nuijpfx Amkja throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Control panel: Bruderer touchscreen HMI Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Tedezil Tropfx Amkja Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Tsdjzil S Ijpfx Amkja Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Tjdpfx Aozil Sujmksa Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Tedpfxey Sak Ts Amkoa Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Todsznhwdspfx Amkea Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: good (used), functionality: fully functional, Boschert Compact Rotation 1000x2000 Todpfx Ameznu T Esksa Equipped with the Trumpf tool system and featuring the Boschert rotation, which enables continuous 360° rotation of the punching tool up to tool size III. Punching force: 28 tons. Spray device. Chip extraction system.

Condition: good (used), functionality: fully functional, Boschert EL 300 The Boschert EL 300 is a manual punching machine with a punching force of 28 tons. Equipped with a Trumpf tool holder, dies up to size III (pitch circle 105 mm) can be installed. It offers continuous stroke, single stroke, and jog mode operation. In addition to the standard foot pedal, the punching stroke can also be activated via a two-hand control, which is particularly useful for workpieces where the acrylic shield must remain in the upper position (e.g., L-shaped brackets), allowing operation via the two-hand control. The integrated drawers are ideal for storing punching tools and accessories. The simple operation and quick tool change make this machine accessible to everyone. Tedpfoznu H Ssx Amksa

Condition: good (used), functionality: fully functional, Weight: 3.5 tons Todpfx Ajzmp I Ismksa Punching force: 1000 kN Reach: 760 mm Can punch, for example, a 40 mm hole in 22 mm steel Drive power: 8.5 kW Height (approx.): 2.15 m Width x Depth (approx.): 0.8 x 2 m Stroke release via foot switch.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Tjdpfx Amszh I Iiekea Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, Year of construction: 2001, Combined punching machine with shear and automatic loading/unloading system – FINN-POWER SG + TRS6FB _____ Brand: FINN-POWER Model: SG + TRS6FB Year of manufacture: 2001 Machine weight: 22,000 kg Punching force: 300 kN Shearing force: 250 kN Max. working pressure: 300 bar Description: CNC combination punching machine + corner shear, complete with: Todpew Iflmsfx Amkoa • automatic loading system with sheet metal storage • CNC rotary turret • integrated corner shear • conveyor belts for unloading • soundproof cabin and safety guards • dedicated Finn-Power CNC The machine is currently installed and can be inspected by appointment. Condition: • Immediately available 📍 Location: Italy _____

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch Todpfx Amod R A E Asksa -2 column punching tool -Recording: Ø 32 mm bolt -Dimensions: 270/290/H325 mm -Weight: 39 kg

Condition: used, Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 5000 kg -Chain length: 2250 mm -Dimensions: 900/500/H160 mm -Weight: 35 kg Tsdod R Hrbepfx Amkea

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch Tsdped Sf U Uefx Amkoa -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Condition: used, Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg Tedecwdmgjpfx Amkoa

Condition: used, 4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function -Admission imensions: 300/205/H445 mm -Weight: 100 kg Tsdpfx Asdxnlfomksa

Condition: used, Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm Tedochlyfjpfx Amkoa -Weight: 10 kg

Condition: used, Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm Todpfscwn Ezox Amkoa -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Condition: used, Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 2000 kg -Chain length: 2.5 m -Dimensions: 730/230/H170 mm Todjd Ndi Topfx Amkja -Weight: 16.2 kg

Condition: used, Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 5000 kg -Chain length: 3700 mm Todpfx Amod R Hrcjksa -Price: per piece -Number: 2 pieces -Dimensions: 980/600/H160 mm -Weight: 47 kg

Condition: used, 4-column punching tool, parting tool, punching tool, punch, punching die, punching punch -4 pillars: punching tool -Dimensions: 395/195/H240 mm Tjdpfxsd Sgaas Amkja -Weight: 54 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch Todpfefdkgyox Amkja -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Tsdpfxjffm D Te Amksa -Stamping dimension: see photo with dimensions -Socket: Ø 40 mm -Dimensions: 370/270/H275 mm -Weight: 67 kg

Condition: used, 2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available Todpfx Amof Sa N Ujksa -Dimensions: 280/140/H160 mm -Weight: 18 kg