Used Lever-Press for sale (13,434)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Codpfxe Ah Sk Ie Aizshd Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Chjdpfx Aio Achxbezod Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Chodpfx Ais Adu Ulszed Weight: 8,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, Baykal hydraulic press brake, type APH 3110x180 working width 3100 mm max. pressing force 180 tons digital display for back gauge includes a set of tools available mid-December 2026 Codpfx Aj Ah Hhmsizjhd

Condition: ready for operation (used), Year of construction: 1990, Langzauner LZT 90 Pressing area: 2500 x 1300 mm Opening width: 400 mm Number of press cylinders: 6 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.0 kW Space requirement (L x W x H): approx. 3000 x 1500 x 1950 mm Weight: approx. 3800 kg Hydraulic heating plate press with bottom cylinder design Pressing pressure can be continuously adjusted by means of a pressure control unit Two-stage hydraulic pump with automatic changeover valve from low to high pressure Chjdpe Ahyvvsfx Aized Central control panel at the front Rack-and-pinion compensation for uniform closing Safety pull cord Opening automation Stroke limitation

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 551198, paper width (min.): 400 mm, paper width (max.): 720 mm, paper height (min.): 480 mm, paper height (max.): 1,020 mm, Equipment: documentation/manual, ▪ Preset Plus feeder, ultrasonic + side-lay double-sheet detection ▪ AutoPlate Pro automatic plate changing ▪ Sheetfed Control (CAN-Bus), decentralised drive control ▪ Automatic blanket washing + Tandem Wash-up ▪ Prinect Press Center console, remote inking, Wallscreen ▪ Alcolor dampening, Alcolor Vario, IPA kit Codpfxj Ahqlco Aizohd ▪ Sheet travel monitoring sensors ▪ CombiStar CANopen (temperature, alcohol, pH) ▪ Inpress Control ×2 with inline register correction ▪ Preset Plus delivery, direct-drive suction-belt sheet brake ▪ Remote-controlled oscillating rollers ▪ PowerStar AP 500 Duo + CleanStar Compact ▪ StaticStar Compact antistatic ▪ AirStar Pro, ScrollStar compressor, UPS

Year of construction: 2016, condition: excellent (used), MASA hydraulic press for slabs Year: 2016 Type: Uni 2000-600/7, 7 stations, pressing force 600 tons Moulds: 60x60 cm, max thickness 10 cm Transport system (finger car) to curing chamber 3,000 steel curing pallets; 250 galvanized control conveyors Cedpfoyhlkpox Aizehd 8 curing chambers with ventilation and steam pipe Pallet brushing unit with filtering unit, max width 400 to 600 mm Manual packaging system REX-2000 calibrating station, 2 workstations 6-head grinding machine Kraft Energy curing system Chamfer grinding machine, 12 m drying line, 8 fans Complete Teka concrete plant (2 mixers: 750 L and 325 L) with 8-compartment storage bin with extraction belt, bucket weigher on load cell External storage silo with 50-meter belt conveyor. Reversible belt on top 8-bin storage hopper Laminating system for special tiles for bonding steel sheet under the slab Stacking device for curing chambers

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 80 t Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Working area Overhang: 280 mm Table Csdpj Aa Ntnofx Aizshd Table width: 710 mm Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany. Cedpfx Aijz Rk N Hezshd

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Codpfx As Aa Nahjizehd Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 t Stroke: 250 mm Travel: 8–100 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight: approx. 3.5 t Table and ram Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 × 280 mm Ram adjustment: 63 mm EQUIPMENT No information available regarding accessories.

Condition: used, Year of construction: 1968, power: 14 kW (19.03 HP), input voltage: 380 V, type of input current: three-phase, Prasa półkowa OTT JU 60-S niemieckiej produkcji, przeznaczona do prasowania i klejenia płaskich elementów stolarskich oraz oklejania płyt fornirem. Maszyna sprawdzi się przy produkcji elementów meblowych, frontów, drzwi oraz płyt warstwowych. Podgrzewane płyty umożliwiają prowadzenie procesu klejenia na gorąco, przy zastosowaniu odpowiednio dobranego kleju. Masywna stalowa rama oraz hydrauliczny docisk zapewniają stabilną konstrukcję. Dolna płyta robocza jest podnoszona, a mechanizm zębatkowy synchronizuje jej ruch. DANE TECHNICZNE: – producent: Paul Ott KG, – model: JU 60-S, – kraj produkcji: Niemcy, – rok produkcji: 1968, – numer fabryczny: 4792, – typ: prasa hydrauliczna półkowa z ogrzewaniem elektrycznym, – liczba półek roboczych: 1, – liczba płyt prasujących: 2, – napięcie silnika według tabliczki: 380 V, – prędkość obrotowa silnika według tabliczki: 1400 obr./min, – napięcie zasilania ogrzewania: 380 V, Cjdpfx Ao Ahg Hksizohd – moc ogrzewania: 14 kW. WYPOSAŻENIE I KONSTRUKCJA: – hydrauliczny układ docisku, – podgrzewane płyty prasujące, – ruchoma dolna płyta, – mechanizm synchronizacji ruchu stołu z listwami zębatymi, – panel sterowania umieszczony z przodu maszyny, – analogowe wskaźniki i pokrętła regulacyjne, – wyłącznik główny, – masywna stalowa konstrukcja ramowa, – otwarty dostęp do przestrzeni roboczej. ZASTOSOWANIE: – fornirowanie płyt meblowych, – klejenie płaskich elementów stolarskich, – prasowanie elementów warstwowych, – produkcja frontów, drzwi i elementów meblowych. Wystawiamy fakturę VAT. Możliwość organizacji transportu za dodatkową opłatą. Zapraszam do przetestowania maszyny. Gdzie obejrzysz nasze maszyny? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE

Condition: good (used), Bookbinding press with tapping block Cedpfx Aisz Rk Rkszehd The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Year of manufacture: 2025 Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes Cedpfeztxn Rjx Aizjhd - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm Cjdotndu Uepfx Aizjhd CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, paper weight (min.): 80 g/m², paper weight (max.): 300 g/m², paper width (min.): 100 mm, paper width (max.): 330 mm, number of feeding trays: 4, Equipment: auto duplex, brochure finisher, Digital CMYK laser printer. Available with a Fieri processor. Output with saddle stitching for booklets. Scanner. It was purchased from the official dealership and has been maintained exclusively by the official service center using genuine parts. Cedez Hrhuspfx Aizjhd It is in working order and available for any inspection.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 3100 Press”. Items for sale: 1 x Xerox Versant 3100 Press with the following specifications: Includes finisher A-GW04/A-GW07/A-FN13 Includes Xerox FreeFlow Print Server Includes paper deck A-CF03 Includes a stacking unit Chodpe Afupfjfx Aizsd Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 3,638,436 pages Colour: Approx. 320,860 pages Black: Approx. 3,317,576 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order A test print can be seen in the photo Packaging and dispatch: You are welcome to view the machine during our business hours. Please arrange an appointment! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, Chsdpfx Ajzz Hifoized The machine is fully operational, after modernization of the control system. Extendable work table. Timer control allows the machine to be started at a specific time to ensure it is ready for operation. 380V power supply. Heating plate size: 400x530mm. Weight: approx. 800kg.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 000163, color channels: CMYK, paper weight (min.): 45 g/m², paper weight (max.): 80 g/m², total length: 16,000 mm, total width: 3,500 mm, total height: 4,500 mm, space requirement length: 20,000 mm, space requirement width: 6,000 mm, space requirement height: 6,000 mm, year of last overhaul: 2020, type of input current: three-phase, input voltage: 380 V, cutting length (max.): 630 mm, section length (max.): 1,000 mm, Equipment: documentation/manual, kitap,jurnal,gazet çap enjam.Sagatda nominal25000 şertli önüm.(maksimal 35000 çenli)tizlik.wertikal gurnama çap guraly 4+4CMYK. Jf35 epleýjili,63sm kesiji,üç görnüş epleýiş,doly işjeñ ýagdaýda.Rulon oturtma iki rulonly.4+4 CMYK Chjdpfx Aijz A Uz Ajzjd

Condition: used, total length: 3,500 mm, total width: 1,500 mm, total height: 1,800 mm, Year of manufacture: 2008 Colour: White Codpo Ahyp Eofx Aizehd Empty weight: 1.400 kg - Year: 2008 - CE marking present: Yes - Serial number: 0040108 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Total stroke [mm]: 500 - Number of work zones [pcs]: 1500 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 55 - Total pressure [Ton]: 30 - Voltage [V]: 400 - Current consumption [A]: 3.6 - Fuse [A]: 16 - Power [kW]: 75.0 - Transport dimensions: 3500mm x 1500mm x 1800mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Codpfox Eg Upjx Aizohd Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2022, The lot consists of: PET bottle granulator ZERMA GSH-800; AMIS; S/N GSH 800/1200-S7-3 #11783 (2022); 132 kW; rotor 800 x 1,200 mm; 10,400 kg; approx. 1 t/h with 12 mm screen (technical details available for download as a PDF in "Essential information") Friction cleaner FR 800-2000; R&K; S/N 100009/2014; friction cleaning unit Turbo Washer HW 83E - unit 1; STF; Approx. 2,026 x 1,480 x 2,472 mm; 22 kW; 1,760 rpm; 400 V Turbo Washer HW 83E - unit 2; STF; S/N hw8e14/01; 2014; Approx. 2,026 x 1,480 x 2,472 mm; 22 kW; 1,760 rpm; 400 V Csdpfo Ahhm Usx Aizohd Friction cleaner FR 800-2000 - multiple units; STF / R&K; Approx. 2,700 x 2,000 x 2,200 mm; 2,400 kg; rotor 800 x 1,800 mm; 87 mixing elements Flotation tank - multiple units; R&K; Approx. 13 m3 capacity; conveyors, motors and mixing drums Inverting screw conveyors - multiple units; R&K; 2.2 kW; 400 V Blowers TRL 40/75 - multiple units; Kongskilde; 5.5 kW; 400 V; 50 Hz Cyclones - multiple units; Kongskilde; auxiliary air separation equipment Magnetic trap MSV 200/7; Magsy; S/N 1259; 2022; 200 mm inlet/outlet; neodymium magnets; approx. 5.2 kg Zig-zag separator with two TR

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Codpfx Aozca Uxeizehd

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm Chodo Ad H Ttjpfx Aizsd ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 1,500 h, functionality: fully functional, Channel baling press Paal Pacomat III-50D, year of manufacture 2022, very good condition Technical data: Manufacturer Kadant Paal Type Pacomat III-50D Year of manufacture 2022 Operating hours approx. 1500 Pressing force 50 t Connected power 24 kW Feed opening 1250 x 1020 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 6.4 t/h 60 kg/m³ approx. 8.6 t/h 80 kg/m³ approx. 12.7 t/h Bale weight up to 650 kg Transport dimensions approx. 8172 x 2030 x 2500 mm (LxWxH) Machine weight approx. 12000 kg Materials: paper, cardboard, film The press is still in use until the beginning of December and can be inspected while in operation. The condition is very good. It has only been used for paper/punching waste. The complete operating manual including electrical/hydraulic wiring diagram and CE declaration is available. Cjdps Ah Rikofx Aizshd The conveyor belt shown in the pictures is not included in the scope of supply. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any guarantee.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, We have a Kirk-Rudy Firejet C4 inkjetsytem full colour KR519 year 2021 available. Complete with feeder, alignmenttable, mailbase and conveyor. Chsdpezwlbrofx Aized This machine has not been used much so now for you a chance to buy a almost new one for a used price!