Used Lift Table for sale (64,853)

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,950 mm, construction height: 300 mm, lifting height: 1,650 mm, load capacity: 1,500 kg, overall weight: 450 kg, total length: 2,500 mm, total width: 800 mm, table width: 800 mm, table height: 1,950 mm, table length: 2,500 mm, transport length: 2,500 mm, transport width: 1,200 mm, platform width: 1,200 mm, platform length: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 1,950 mm, space requirement width: 1,200 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, Technical description with the following main data: Load capacity 1500 kg static line load effective stroke 1650 mm Overall height 300 mm Total height 1950 mm Platform length 2500 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 35 sec. for the full effective stroke Lowering time load-dependent Pgsdpfeuhphvjx Aahou Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Paintwork dust gray RAL 7037 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 450 kg

Condition: excellent (used), VW/Audi VAS 6131 scissor lift table Especially for installation/removal and repair of engine and transmission. + Scissor lift table for all vehicle models + Ideal for installing and removing vehicle components + High stability + Flexible range of application Product description The VAS 6131 scissor lift table can be used to quickly install and remove engines and gearboxes from the latest generation of power units without the need for additional equipment. These drive trains weigh up to 800 kg, which is why the conventional motor and gearbox lifter cannot be used here. Ease of use and simple maneuverability set standards and make the product indispensable. Product advantages - Maximum flexibility: The mounting platform, which consists of a motor and a movable gearbox plate, can be tilted three-dimensionally by 60 mm in order to perfectly reach all mounting points of the drive train in all installation positions - Universal use: The motor and gear plate are provided with a grid hole pattern: the corresponding mounts are screwed onto the plates for unit-specific adaptation - Convenient, simple operation: Thanks to the movable gear plate, the motor and gearbox can be separated and rejoined on the scissor lift table without great effort; an egg and creep speed ensure efficient lifting and lowering speed Pgsdpfx Aaov Hprwsheu - Optimum stability, tipping safety and mobility: The drawbar enables easy maneuvering, the lowering device ensures a secure stand. Manufacturer: BlitzRotary Model: VAS 6131) Type: Lift table Load capacity: 1200 kg Voltage: 380 V, three-phase Dimensions: 2500 x 850 x 950 mm Weight: 695 kg Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2024, functionality: fully functional, Technical description with the following main data: Load capacity 1000kg static line load useful stroke 775mm overall height 85 mm total height 860 mm platform length 1450 mm platform width 1140 mm Material smooth sheet metal Lifting time approx. 20 sec. for full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 4 meter cable motor 1,1 kW Painting blue-grey RAL 7031 Unit placement free standing Control box dead man control incl. 2 m cable Total weight approx. 270 kg Standard version: The lifting tables comply with EN 1570 E and are CE marked. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane paint. The lifting tables are equipped as standard with aluminum safety shut-off bars on all sides and with mounting supports for repair and service. Pgedpfx Aajiwi Injhsu Our lifting tables are dimensioned for approx. 5 strokes/hour with full load in 8 hours /day. For more intensive operation we offer special lifting tables.

Condition: as good as new (ex-display), Year of construction: 2023, Technical description with the following main data: Load capacity 3000 kg static line load effective stroke 1100 mm Overall height 250 mm Total height 1350 mm Platform length 1700 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 29 sec. for the full effective stroke Lowering time depending on load Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 2.2 kW, 1,400 rpm. Valve voltage 24 V DC Sealing class IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 455 kg Pgedsupztzopfx Aahsu Floor frame for moving with pallet truck or forklift

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m Psdpetddw Ajfx Aahsgu - total width: 1200 mm - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Year of construction: 2012, condition: ready for operation (used), Max. load: 2.5t, connected load: 4kW, weight: 1.477t. Pjdpfx Ajlyrz Isahsgu

Condition: new, table diameter 800 mm table load 2 t swivelling range --> 95 Grad max. torque 1250 Nm table rotation speed 2 U/min Working height from to 550 - 1300 vertikal mm Working height from to 650 - 1400 horiz. mm total power requirement 2,53 kW weight of the machine ca. 930 kg dimensions of the machine ca. 1,85 x 1,66 m Video available on our website. Electric 400 Volt Hand control panel Hydraulic-device Pjdek Rfwtjpfx Aahsgu Hydraulic positioner for permanent turning right + left, tilting, Raise and lower. Various sizes from 1250 - 18000 kg load capacity in the production program. Machine dealer with own stock of 1600 m².

Condition: new, weight max. in kg 2500 kg Working height minimal 350 mm Pgjdpsvw Du Uefx Aahou Working height maximum 1850 mm max. torque 3000 Nm 0 1 U/min adjustment speed vertikal 560 mm/min vertical adjustment 1500 mm baseplate diameter 600 mm rotation movement 0,75 kW stroke drive 1,85 kW height of the plant 2505 mm weight 1160 kg Sideros Engineering Head & Tailstock Positioners are used to weld and assembly long and large weldments in many different application fields. Besides the benefits of ergonomics and safety during welding and assembly applications, the revolutionary feature of Syncrolift is the compactness and the portability of both columns, thanks to their dedicated hydraulic jacks. The result is an extreme flexibility in the factory. Syncrolift features two main axis: Electrical elevation/descent, and Electrical 360° left/right rotation. Due to its special design, the column positioner can process very large components. Higher columns (+500/+1000/+1500 mm) for processing components with larger dimensions are available. Special equipment: Double-sided lifting drive, guide rails in 2 m segments, wireless handheld control unit, TCS program control, etc. Thanks to the movable columns, the length of the different workpieces can vary between 1 m and over 20 m. Depending on the weight and dimensions of the component, positioners with load capacities of max. 2,500 kg to max. 40,000 kg are available. Advantages: Improved Safety Proper Ergonomics Improved weld quality Cost savings and profit increase Welding/Assembly procedures repeatability Machine Features: Master and idler column with rotating mounting plates Pallet jacks for column lifting and relocating Servo-motor, ball screw and encoder control for Up & Down motion Servo-motor, gear reducer and encoder control for Rotation LCD display for positioning set up, safety thresholds setting and diagnostic Automatic load leveling Redundant safeties - servo motor brake, ball screw thread geometry and mechanical Stopper Low maintenance 240/480/600 Volt - 3 phase - 60 Hz In order to configure the system precisely to meet the requirements, we must obtain all relevant information about the workpieces to be processed for the manufacturer's technical office. There we have a list of questions for this purpose.

Condition: used, Pneumatic tilting roller table, assembly table /ct1817/ Pneumatically tiltable roller table, stand. Manufacturer: Lenhardt Pgsdpfx Aaouglz Nohsu Size: 2500 x 2000 x 900mm In the open state, the height of the table: 2250 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 300 mm, lifting height: 950 mm, load capacity: 1,000 kg, total length: 1,650 mm, total width: 630 mm, table width: 600 mm, roll diameter: 70 mm, power: 1.1 kW (1.50 HP), roll width: 600 mm, In total - 10pcs. Pgjdpfx Aewgwktjaheu

Condition: new, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton load capacity, available as a set or individually. Driven on both sides. The machine is offered as a synchronized set or as individual units. Protec turning/positioning device Syncrolift. Double column, wireless and manual hand remote control. Column adjustment electrically drivable in both directions. Load capacity 10,000 kg, 360° rotation. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Pedpfx Aowtq Dtjahegu Clamping plate diameter: 900 mm. Rotational drive: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available as a mono model (more economical). Optional with articulated flange (cardan flange).

Year of construction: 2013, condition: good (used), Scissors lifting table with driven roller conveyor - second-hand - Price (net) ex location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Pedpfx Aefwr Uqoahjgu Year of construction: 2013 Type: roller conveyor / scissor lift Length of roller conveyor: unknown Width element approx. 75cm roll length: approx. 68cm roll width: approx. 5cm Element height: approx. 15cm lifting height: currently approx. 78,5cm Motor: SEW condition: good Available: immediately Location: Zwickau, later warehouse Frankenberg (Saxony)

Condition: new, Year of construction: 2023, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Psdpfjk E Hmtsx Aahogu Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Condition: used, Lifting Table Manufacturer: Marco Country of manufacture: Sweden Power: 0.98 kw Length: 980mm Pgjdoxdhr Topfx Aahsu Width: 800mm Load capacity 200kg Hydraulic station

Year of construction: 1977, condition: used, machine/vehicle number: 74 362, Load capacity: 500 kg Table size: 600 x 600 mm Pgodpfxob Nwfgj Aahou small height above floor: 600 mm stroke, hydraulic foot operated: 720 mm maximum height above floor: 1320 mm weight: 105 kg

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Podpfx Aaet Ah Niohegu Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: excellent (used), mileage: 2,68,000 km, power: 183.87 kW (249.99 HP), first registration: 10/2018, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 5,670 mm, emission class: euro6, ROSSINI SERVICE S.R.L. is an authorized IVECO workshop and multi-brand dealer of used commercial and industrial vehicles. OFFERING: MAGNIFICENT IVECO EUROCARGO 160E25P BOX WITH TAIL LIFT, EURO 6, GENUINE KM, CERTIFIED AND REPORTED ON THE SALES INVOICE. FOR INFORMATION: 3441197960 – 030933077 Nicola / Franco Visit our website rossiniservice, VARIOUS MODELS AVAILABLE ON SITE. Standard features: ABS, Electric windows, CD player, MP3, Power steering, Comfort air-suspended seat, Heated electric mirrors, Air suspension. GVW: 16,000 kg Possibility to modify the wheelbase to suit your requirements. Load compartment dimensions: 850 cm (L) x 245 cm (W) x 241 cm (H) Pedpfoxa Aawjx Aahjgu FULL SERVICE BEFORE DELIVERY carried out by our specialized IVECO technicians. Rossini Service delivers the vehicle directly to your location upon prior quote request. Founded in 1960 as a FIAT / OM workshop, since 1992 Rossini Service is an ISO-certified authorized IVECO workshop. Our qualified and specialized staff boasts decades of experience in the repair and tuning of cars and industrial vehicles of any make. Every Rossini Service vehicle is thoroughly inspected and fine-tuned before delivery.

Condition: new, Year of construction: 2024, Double scissors lifting table type TMH 6000 *Special double horizontal - load: 5000kg - lifting height: 1100 mm - min. height: 240 mm - max. height: 1340 mm - length: 10.000 mm - width: 1200 mm - lifting time: appr. 28mm/sec. - motor power: 2,2 kW - power supply: 3 x 400 V/50 Hz + earth - power unit: integrated - controlling voltage for operating function is 24 Volt DC - Sealing in gereral: IP 54 - solenoid valve and push-button-box: IP 65 Pedpfxoy E Sdj Aahogu Technical description: - all surfaces of the metal parts are cleaned, primed with rust-preventing paint and coated with 2-component polyurethane lacquer - base frame and platform are painted in blue RAL 5015, all scissors in orange RAL 2003 - our quotation includes an aluminium safety trip bar and service maintenance bars to lock the table during service and repair.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Pjdpfjilluksx Aahjgu Clamps / grippers 7 Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) OPTIONAL: Optimisation software: HPO

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels) Psdsimr Icjpfx Aahsgu

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 5400 x 2200 ca.) - OPTIONAL Lifting table (mm) 4420 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 9 clamps Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Pjdep N D Atjpfx Aahogu Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm / Kw 1,9 Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Lifting table (mm) 4300 x 2200 Pjdsq Rffijpfx Aahegu No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Max. cutting width (mm) 4200 Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Total power (Kw) 36 (ca.)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Pgodpfsh Imvhjx Aahju Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.) Pedep R Sdhepfx Aahsgu

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Outside Rollers table for pre-loading (mm 4500 x 2200 ca.) Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher No. 10 clamps / grippers Psdoq Rfahopfx Aahsgu Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 135 Max clamps opening (mm) 133 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 0 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 36 (ca.)