Used Light Table for sale (45,226)

Condition: new, functionality: fully functional, load capacity: 10,000 kg, pivoting range: 360 °, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides driven Machine offered as synchronized set or individually Protec turning device / positioner Syncrolift Double column, handheld remote control wireless and manual Column adjustment 2x electrically movable Gtsdpfx Asxq S Rgjh Hjt Load capacity 10,000 kg, 360° Minimum working height: 800 mm Maximum working height: 1,700 mm Speed 0.5 rpm Clamping plate diameter 900 mm Rotary drive 2 x 2.2 kW Torque 18,950 Nm The machine is also offered individually as mono model (more affordable) Available on request with articulated flange (cardan flange)

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: Godpfx Asx Up Igsh Hjtt 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: new, CATALOGUE NUMBER RE022 – new machine, in stock – DTR + CE documentation – cutting width at the guide 1300mm – main engine 6kW TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - cutting length on the carriage 3000mm - main spindle speed 3500/4500rpm - spindle diameter 30mm - main blade diameter 300-400mm - max. scoring diameter 125mm - scoring engine power 0.75kW - scoring speed 8500rpm - spindle diameter 20mm - cutting width at the guide (standard 1050mm, option 1300mm) 1300mm - sawing width using bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90°/45° 90/60mm - cutting height for 350mm 90°/45° 5-115 / 3.5-80mm - cutting height for 400mm 90°/45° 25-140 / 15.5-95mm Gsdpfsx Rqrxex Ah Hjtt - diameter of the exhaust port 80mm, 125mm - dimensions length/width/height 3300/3460/1500mm - weight 750kg Optional equipment: - angle ruler - with aluminum strip - additional support table - additional start/stop in the formatting table - electronic cutting width reader on the longitudinal ruler - electronic cutting width reader on the auxiliary table - formatting table 3200mm, 3900mm, 2500mm Net price: PLN 41,550 Net price: EUR 9,890 Net price calculated according to the exchange rate of PLN 4.20/EUR (with larger exchange rate fluctuations, the price may change) The prices given are net prices. Net price given for international transactions, customers from the EU with an EU tax identification number.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Wagner WAK 350 A Aluminium Circular Saw Fully Automatic (2016) Manufacturer: Wagner Model: WAK 350 A Aluminium Circular Saw Fully Automatic Year of manufacture: 2016 Condition: used, very good to like new Saw blade diameter: 350 mm Round cutting capacity at 90°: 125 mm Square cutting capacity at 90°: 110 x 110 mm Rectangular cutting capacity at 90°: 175 x 75 mm Cutting speed: 3,000 rpm Motor power: 3 kW Weight: 260 kg Dimensions (LxWxH): 1,400 x 850 x 970 mm Material feed unit with infinitely variable feed speed adjustment. Length reversing with robust feed clamp, dual reversing function. Work area safety guard, automatically closing and lockable. Vertical clamping cylinder on the material feed clamp. Gsdpfxsx Ticbs Ah Hstt 3 pneumatic vertical clamping cylinders, left and right of the saw blade. 3 pneumatic horizontal clamping cylinders for adjustable cutting height. Flexible compressed air hose with blow gun. Saw feed cylinder, feed speed continuously adjustable via control valve. Minimal lubrication system with adjustable dosing. Material length is set via a mechanical-numerical counter with the smallest setting increment of 0.1 mm. Scope of delivery: Infeed roller conveyor 3m

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Godpjwu Uahefx Ah Hjtt

Condition: used, Year of construction: 1986, table length . mm table width . mm table load 3 t turning speeds Poti U/min Gtodpfx Ahsucguij Hst weight of the machine ca. 2 t

Condition: ready for operation (used), functionality: fully functional, load capacity: 2,000 kg, Welding positioner, turntable, Strähler KT 2000 Machine description: welding positioner, turntable Manufacturer: Strähler Model: KT 2000 Condition: ready for operation (used) Gedpfx Aexq S I Seh Hott 2-ton load capacity welding positioner Adjustable speed and tilt With hand and foot remote control Clamping plate diameter: 1300 mm Horizontal height: 1100 mm Height when tilted to center: 850 mm Length: 2300 mm Width: 1300 mm

Condition: good (used), Baumann BSB 3L Paper Jogger The machine is 100% functional and in very good condition. Technical specifications: Gtedpfjx N Dw Sjx Ah Het Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table Tilt angle adjustment Jogging frequency adjustment (inverter) Adjustable air squeezing roller force and speed.

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Gsdpjx Rqrlsfx Ah Hott Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Cross table with stepper motor drive Precision positioning systems UHL Cross table UHL type KT5-NSOC Series no. 0008002 Table size: 145 x 145 mm Table opening: 75 x 75 mm Height: 51 mm Gtsdpfx Aoflrtpsh Hjt Travel: 50 mm per axis Straightness / flatness: 5 μm - Drive per axis via 2-phase hybrid stepper motor, type ZSS 33.200.1,2 - Manual adjustment Dimensions (cross table) L x W x H: 265 x 220 x 51 mm Weight: 3.5 kg Very good condition

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Gtedpfx Ahju Utwbe Hot Tailstock Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: excellent (used), Year of construction: 2020, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 940 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total height: 2,750 mm, total length: 6,130 mm, total width: 3,600 mm, table length: 1,120 mm, table width: 1,000 mm, feed length W-axis: 710 mm, overall weight: 14,400 kg, Heidenhain TNC 640 control system Heidenhain TS 460 measuring probe Gtsdpfex Tp Dlox Ah Hjt B axis – 2 rpm, increment 0.001° Tool magazine: AVN 40 positions Through-spindle coolant: 25 bar Main drive motor power: S1 22.5 kW; S6 34 kW Includes operator cabin, machine enclosure, tool holders

Condition: good (used), functionality: fully functional, Bench jigsaw, tabletop saw MAR Specification: • Condition – used • Manufacturer – MAR • Single-phase motor • Table size: 31 x 30 cm • Working clearance – 10 cm • Solid, heavy-duty body • Overall dimensions: 90 x 35 x 80 cm (L x W x H) Gsdpfx Ajx S N E Tsh Hett Additional information: • The machine is in good technical condition and ready for immediate use • The included photos show the actual condition of the item for sale • Possibility to switch on and test the device on site

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Gtodexp Sk Depfx Ah Hst MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: new, Year of construction: 2025, The PS12E-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. The main features of the saw, the PS12E-2000 wood panel saw: Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Blade height adjustment: offers infinitely variable height adjustment of the cutting saw up to 100 mm, allowing it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45° Gtedpfx Ajvuf Tmeh Hst Solid guideways: The machine has solid guideways with scales, both longitudinal (steel) and angular Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system, which helps keep the work area clean. Easy disc change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with graduation: fitted with a side guide with accurate graduation, which facilitates serial cuts of the same length. Saw blade guard: the saw has a saw blade guard that can additionally be connected to the extraction system, which guarantees safety and cleanliness in the working area. Technical data: Length of the format table [mm] 2000 Cutting width right side [mm] 1260 Swing of saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height when using circular saw blade 315 90° [mm] 100 Cutting height with saw blade set to 300 90° [mm] 95 Maximum dimension of saw blade [mm] 315 x 30 Maximum dimension of undercut [mm] 100 x 20 RPM of main saw [U/min] 4500 Bowl speed [U/min] 5800 Motor power S1/S6 3.8 kW / 6.1 hp Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t Gedpfx Asu Idp Djh Hjtt with face slide 700mm , electronic hand control *

Condition: new, Year of construction: 2025, functionality: fully functional, A marking work table dedicated to threading machines is a solid and functional solution for professionals. It has holes for mounting the threading arm and a polished top with T-slots with a spacing of 152 mm. This high-quality table with dimensions of 800 m x 500 mm 860 mm ensures stability, precision and mobility when machining threads. Additionally, the table is equipped with tool cabinets that provide easy and practical storage of necessary items. Characteristics of the marking table: The marking work table dedicated to threading machines is a solid and functional solution created for professionals involved in thread processing. This high quality table has been specially designed to enable precise threading operations. The polished table top is not only durable, but also equipped with T-slots with a spacing of 152 mm. These grooves are perfect for all marking work, enabling safe and precise guidance of tools. The table is equipped with a practical tool cabinet that allows you to store the necessary tools for work. Thanks to this, tools are always at your fingertips, which speeds up and facilitates thread machining processes. Gsdpfxevugu Eo Ah Hett Additionally, the table is equipped with ergonomic wheels with a brake, allowing it to be easily moved around the workshop. Thanks to them, work becomes more mobile and the table can be freely moved depending on current needs. The wheels are solid and durable, which ensures the stability of the table during work and at the same time allows it to move smoothly across the workshop surface. This table has appropriate dimensions that provide a comfortable and effective working space. Its length is 800 mm, which provides enough space to handle various sizes and lengths of materials. The table width is 500 mm, which is the optimal size enabling free operations on the material. The marking work table dedicated to threading machines is a solid and functional solution that provides professionals with high precision and stability when machining threads. Thanks to equipment such as T-slots, a tool cabinet and ergonomic wheels, this table allows comfortable and effective work in the workshop. Technical parameters: Tabletop dimensions 800 x 500 mm Table height 760mm Countertop thickness 50mm Groove width 3x 14mm Groove spacing 152 mm Door width 360mm Door height 605mm Weight 84 kg

Year of construction: 2025, condition: new, Professional Grinding Table for Wood and Metal A filtration device that works well in any environment where grinding operations take place. THE TABLE IS EQUIPPED WITH 2 FANS ON THE RIGHT AND LEFT SIDES. The table features an independent dual filtration system, ensuring the air is thoroughly cleaned of all contaminants! A special high-efficiency radial fan guarantees long operation without the need for frequent replacement of filtration materials. The eleven-segment worktable makes it easier to position the workpiece and clean the filters. Quick and easy filter replacement. Ventilation system located at the bottom and the side of the table. Separation of "large" and "small" grinding waste. Heat-resistant filter (not fireproof). Spacious metal drawer on the right and left sides of the table. High vacuum (dust filtration efficiency > 99.9%). Technical Parameters: Worktop dimensions: 2060 x 530 mm Gtodpfx Ajvugxwoh Hjt Motor power: 2 x 1 kW Airflow capacity: 2 x 4000 m³/h Filter dimensions: 493 x 395 x 20 mm Voltage: 230V Overall dimensions: 2160 x 600 x 870 mm Weight: 120 kg Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Gsdpfx Aovxhkish Hstt Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 230V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, The innovative circular saw is a combination of a powerful, precise, universal and compact device. It was created for small carpentry workshops, furniture manufacturers and craftsmen. This machine uses many solutions usually used in more expensive devices of this type. The excellent price-performance ratio has been achieved without compromising on quality or versatility. Machine description The TS 315 industrial circular saw for solid wood is an innovative combination of a powerful, precise, universal and compact machine! It was created for carpentry workshops, hobbyists, furniture manufacturers and craftsmen This machine uses many solutions used in much more expensive machines of this type! Excellent price-performance ratio has been achieved without compromising on quality or versatility! The machine is also used to process high-density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or with a similar structure and hardness. Smooth and precise adjustment of height and angle using a knob Stable, heavy, high-quality machine body. Broadening and extending the table allows for comfortable work. Smooth aluminum reinforced sliding table. Precision parallel stop with fine adjustment. Sturdy telescopic arm and extendable extension table Large drive motor guarantees consistent cutting speed, even at a cutting height of 100 mm Technical parameters Shield dimensions 315x30x3.2mm Dial rotation 4250rpm Godpfx Ahovxhm De Hstt Max. cutting height 90/45 degrees 100/75mm Max. cutting width on the guide 940mm Workbench dimensions 800 x 365mm Table extension 760 x 600mm Expanding the table 500 x 350mm Sliding table 1600 x 238mm Suction port diameter 100mm Motor power 2.8kW Supply voltage 400V Weight 245 kg Machine dimensions 1540 x 2400 x 1300mm

Condition: new, Year of construction: 2025, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Godov R Tihopfx Ah Hjtt Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Motor power (S1): 1.0 kW Voltage: 230V Weight: 70 kg Dimensions: 1050 x 600 x 850 mm

Condition: new, Year of construction: 2025, Device description Welding tables in system 16 allow the use of many additional accessories, such as: screw clamps ratchet clamps mounting columns widening feet locking pins Gedpfx Ahjwwq U Te Hett bumpers angular handles Front part is made of thick, 4 mm thick galvanized steel. The primary purpose is welding aluminum, stainless steel or carbon steel from thin and thick-walled profiles. The solid device structure allows not only welding table use, but also locksmithing and repairs with the use of physical force. Parameters Dimensions (LxWxH) 915 x 460 x 885 mm Shelf height 310 mm Holes Ø16 spacing 100 x 100 mm - 45 pcs Lifting capacity 540kg TOP THICKNESS 4 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description of 185x100 mm Cross Table Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Gjdpfxsvu Tqyj Ah Hott Screw guard protects the feed mechanism from chips An additional benefit of the table is a pitch, which simplifies telling the X,Y axes position of the table 2.5mm/0.02mm vernier

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Gtodpfevxhhzjx Ah Het Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 56 mm 90º maximum cutting depth 80 mm Movable table travel 620 mm Cutting width on the right side of the saw 610 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 230V Weight 125 kg Dimensions 1090×1330×910 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Godpfjtz Smiex Ah Hstt Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity