Used Line Bore for sale (15,201)

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline Cedpfxjz Dv Uys Andshd - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: used, all stainless steel with top hold down belt Chjdpfx Ansz Sqm Iodsd water circulation net belt length 4.500 mm net belt width 600 mm adjustable speed sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.800 x 1.400 x 3.000 mm

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,000 kg, COMPLETE FEEDING LINE 3v1 UNCOILER + STRAIGHTENER + FEEDER Type CR-AP 400 Year 2013 width = 400 mm thickness minimal 0,5 mm thickness max = 3,0 mm 9+2 straightener rollers UNCOILER: model SM15 Codpfez S T Sgox Andshd Year 2013, motorized, hydraulic expansion pressure arm coil width 400 mm Decoiler capacity 1500 kg The feeding straightener straightens the material and feeds it into the press. The "CR AP" series features an opening head for easier roller cleaning and pilot release. This type of machine is suitable for working with medium-thickness strips.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Insulated glass production line Maximum IG unit size: 2000 x 3150 mm Working direction: from right to left Maximum IG unit thickness: up to 56 mm Line consists of: - Inlet conveyor FOREL, - Washing machine FOREL VW2000A0SX, year: 2010, - Outlet conveyor FOREL, - Assembly and frame-mounting station FOREL, - SuperSpacer applicator TSS200A1, year: 2012, - Automatic corner tape applicator CT2000A3, year: 2012, - Inlet conveyor FOREL, - Gas filling press FOREL APGS20A3SX, year: 2010, - Conveyor FOREL. Line is capable of producing double, triple units, units with shapes and stepped units More technical information can be found attached as Tech. data file Excellent condition Good working order, tested As is See video Available immediately Chedpez Sy Dcefx Andsd

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, outer diameter: 1,600 mm, total height: 1,600 mm, total length: 1,400 mm, total width: 800 mm, inner diameter: 470 mm, input voltage: 400 V, overall weight: 850 kg, Equipment: documentation/manual, Year of manufacture: 2009 Load capacity: 1500 kg Coil inner diameter: 470 - 630 mm Coil outer diameter: 1600 mm Speed: 12 revolutions/min Frequency inverter Cjdpfjz Riz Ijx Andjhd Dimensions: approx. 1.7 x 1.4 x 1.7 m Weight: 850 kg Original documentation included, ready for immediate use.

Condition: excellent (used), Year of construction: 2014, Maximum working length : 6300 mm Maximum cutting w/h : 300 x 100 / 235 x 120 mm Maximum weight of items : 60 kg Engine size : 5,5 Kw Sawblade diameter : 500 mm Software : Weinig Dimter OPTICOM Digital dispaly with optimization and memory of 100 cutting lists Csdpfxsz Ruxfs Andjhd Outfeed table : 2000 mm

Condition: excellent (used), functionality: fully functional, 1x Universal milling machine Deckel FP4 NC Dialog 3 1x Universal milling machine Deckel FP4 NC Dialog 4 Manufacturer: Deckel Type: FP4 Condition: used, good ----- Travel ranges: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 ----- Tool clamping: hydraulic Drive power: approx. 6.0 kW Feeds and rapid traverses: in all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverses: approx. 3.0 m/min ----- L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg *Machine light *Spindle guard Scope of delivery: * 5x tool holders Chjdpfx Ae Acd Tbendsd * Allmatic vise * Walter dividing head * Documentation * Spindle guard

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Codpfx Ane Aba Ncjdehd Consisting of: Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: used, mileage: 2,07,417 km, power: 125 kW (169.95 HP), first registration: 03/2015, fuel type: diesel, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, number of seats: 24, total length: 7,500 mm, total height: 2,900 mm, Equipment: ABS, = Additional Options and Equipment = Cedpfx Aoztw N Hsndehd - Air conditioning (driver) - Webasto heater = Further Information = Damages: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for purchasing and selling used buses. We have an extensive parking area which serves as our display lot. We always have a large selection of buses from various brands, capacities, models, and at all price points in stock. We can find the right coach, school bus, or city bus to fit your needs and budget. All information without guarantee. Errors, prior sale, and typing mistakes excepted. Viewing hours for used buses: Mon.–Fri.: 08:30 – 12:00, 12:30 – 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: ready for operation (used), Compact Dovetail Machine Output: approx. 4–6 joints/min. For wood tenon and mortise joints Thickness: 30–120 mm Width: 75–250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, used for processing PUR glue. Spring-mounted with a safety shut-off system that immediately stops the milling and glue application feed in the event of even the slightest load. Cjdpezmmr Refx Andohd All parts are chrome-plated. Electrical system with Siemens S7 PLC, year 2015 Milling motor output: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed feed: 1.50 kW Outfeed feed: 2.50 kW Cut-off saw: 3.00 kW Total power consumption: 59.25 kW = 120 amps In the past, jöma has successfully delivered and installed 10 of these machines. We can supply all spare parts for the compact dovetail machine. We, jöma, have been supplying and repairing Cook Bolinder machines for 30 years.

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Please Note: Highest bid is subject to vendor approval Chjdpj Afxi Aofx Andod Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Year of construction: 2021, condition: new, functionality: fully functional, For sale is a complete, new, and never-installed industrial line for drying, steaming, and heat treatment of wood, purchased in 2022. The equipment is in factory condition and is manufactured by a top-tier Chinese manufacturer (Shandong Weifang Tenglong Heavy Industry / Annan Yifeng Boiler). This complete set represents a self-contained and ready-to-use system for highly efficient processing of sawn timber in large industrial capacities. KEY CAPACITIES AND LINE COMPONENTS: Wood dryers: 4 chambers, each with a capacity of 100 m³ (total of 400 m³ per cycle). Steaming/humidifying chamber: 1 chamber with a capacity of 50 m³ (for softening, color equalization, and stress relief in the wood). Steam boiler: Industrial biomass/wood chip steam boiler (Model DZH2-1.25-T), with a capacity of 2 tons of steam per hour. Associated equipment: All necessary fans, aluminum heat exchangers, pipelines, valves, and fully automatic PLC control cabinets. DETAILED TECHNICAL SPECIFICATIONS: Wood dryers (Model ZCM-Q100 - 4 units): Chsdpfx Aj Aayi Hjndod External chamber dimensions: 8.00m (W) x 8.60m (D) x 5.60m (H). Construction: Internal and external walls made of high-quality aluminum (0.9 mm thick), with insulation of non-flammable rock wool (80 mm thick) and a supporting structure made of stainless steel (Inox). Ventilation per chamber: 5 axial, high-temperature reversible fans (3.0 kW power per fan, airflow 30,000 m³/h). Heating: 8 groups of bimetallic radiators (special aluminum finned tubes with seamless steel core). Steaming chamber (Model ZCL-Q50 - 1 unit): Capacity: approx. 50 m³. External dimensions: 5.50m (W) x 6.50m (D) x 5.00m (H). Equipped with a direct steam injection system under pressure, with 3 high-efficiency circulation fans and a sliding insulated door system. Biomass/wood chip steam boiler (Model DZH2-1.25-T): Steam capacity: 2 t/h. Pressure: Working 1.25 MPa / Test 1.65 MPa. Steam temperature: 194 °C. Fuel: Wood chips, sawdust, biomass, pellets. Automation: Full-auto PLC control systems (ZCUY-10 / ZCUY-12) with digital temperature monitoring (dry/wet thermometer) and automatic humidity and valve regulation.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm Codpfx Aj Aa N Tbjndehd table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Stainless steel 4,650 x 750 x 2,200 mm (L x W x H) Chodpe Ab H N Nefx Andod -20% discount when picking up the item at the Erfurt location by October 30, 2026.

Condition: used, mileage: 1,11,152 km, power: 265 kW (360.30 HP), first registration: 10/2025, fuel type: diesel, number of seats: 41, gearing type: automatic, axle configuration: 4x2, empty load weight: 12,500 kg, maximum load weight: 5,300 kg, overall weight: 17,800 kg, emission class: euro6, color: violet, suspension: air, wheelbase: 6,030 mm, Year of construction: 2025, Equipment: ABS, air conditioning, bathroom, parking heater, Color: Traffic purple RAL 4006, unladen weight: 12500 kg, permissible total weight: 17800 kg, 35 standing places, tire size: 275/70 R22.5, 1st axle: , 2nd axle: , air suspension, air conditioning for passenger compartment: roof-mounted air conditioning unit TK Athenia S805 (32 kW) with heating function, digital destination display: Vianova 3-sided, auxiliary heater: 35 kW programmable, HVO compatible (Spheros), air conditioning for driver's compartment, stop request button, wheelchair space, stroller space, multifunction steering wheel, electronic stability program ESP, fog lights, raising/lowering function, kneeling function, multi-function display, power steering, tire pressure monitoring, floor covering: rubber, slip-resistant and abrasion-resistant, tinted glass, exterior mirrors: electric and heated, digital tachograph, electronic braking system EBS, stop brake, sunroof, retarder, twin tires, rear-view camera: and monitor (color display, 7 inches, in the dashboard), sun visor: front window electric, adjustable manually on side window, WC, speed limiter: 100 km/h, microphone for tour guide, wheelchair ramp, blind spot assistant, VECO Bus Crossway LE 12m ADAS engine Cursor 9 with an engine power of 265 kW/360 hp, 100 km/h automatic transmission Voith NXT 867.8 and retarder, 41 passenger seats, including 2 folding seats, up to 35 standing places, toilet (WC), door 1: inward-opening door 1000 mm, single-leaf, door 2: outward-opening door 1200 mm, double-leaf, roof-mounted air conditioning unit with heating function, auxiliary heater, WLAN, destination displays Vianova 3-sided, IBIS protocol, double USB port for each row of seats mounted on the side wall, video surveillance system. Cedpfxj Agqcae Andehd

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table load: 10,000 kg, spindle diameter: 110 mm, spindle speed (max.): 2,000 rpm, feed length W-axis: 500 mm, workpiece weight (max.): 10,000 kg, overall weight: 23,000 kg, year of last overhaul: 2025, Manufacturer: Castel Model: Green Year of manufacture: 1997 Spindle diameter: 110 mm Spindle mount: SK50 X-axis travel: 3000 mm Y-axis travel: 1500 mm Z-axis travel: 1500 mm W-axis travel: 500 mm B-axis: 360 degrees Rapid traverse rate: 10000 mm/min Tool changer: 40 tools Coolant system Table dimensions: 1500 x 1250 mm Spindle taper: DIN 69871-40 - ISO 50 Spindle power: 27 kW Table load capacity: 10 tons Number of gear stages: 2 Control system: HEIDENHAIN TNC 415 Axes overhauled in 2025 Rotary table overhauled in 2025 Chip conveyor Dimensions (length x width x height): approx. x 7100 x 7500 x 3700 mm Chodpfx Aj Ad U S Rondjd Total weight: 23 tons

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Chodpfxjxwl Tbe Andsd Weight approximately 200,000 kg.

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) Chjdpfx Ajizxbijndjd OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets Chedoz Ilu Rjpfx Anded External Reference: C.O. - Lot 23

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, Drilling width 240 mm, Drilling depth 150 mm, Max. travel 230 mm, Drill head height adjustment 160 mm, Drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, Speed 3,000 rpm, Motor 2.2 kW, 400 volts, 50 Hz, Weight approx. 345 kg, Ex works, from the Seevetal location, excluding transport, as inspected, Csdpjvl Eynjfx Andjhd subject to prior sale.

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has been in almost no operation since then. The system efficiently covers the entire process from stringer prefabrication, main nailing, IPPC marking to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment of almost all components at the push of a button! • Main line output: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line output: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens PLC S7 (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2020) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. • 1 set (20 pcs) hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Independent operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, outfeed buffer. • Support/spare parts long-term secured through successor AVM Metaalbewerking. Pos. 2: Intermediate drive with integrated IPPC marking station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic mode. • Auto-adjustment at the push of a button: width (700-1500 mm) & height motorized via spindle. • 2 lengthwise adjustable marking units (heating rods 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (fully automatic with nesting) • Stable double-column portal with lifting traverse (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Chedj Afyn Hspfx Andjd Pos. 5 & 6: Roller conveyor & safety devices • Heavy-duty removal (approx. 5,900 mm), driven with 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and removal are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Condition: good (used), PA Eclipse SL6 high throughput tray sealer from ready meals factory. Codpepg Er Nefx Andohd

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm Chjdpfjg D Ugkjx Andsd max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Condition: used, Board repacking line Manufacturer: PlanSel/Nordautomation Pack chain conveyor Codpfx Aoykauzjndjhd Tilt hoist Board elevator Edge cutting system Measurement system Stacker with spacers Outfeed chain conveyor Boards till 6 m

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm 250 - 3000 U/min 0,45 kW 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Cjdpfx Aneynmz Nodshd Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)