Used Long Moulder for sale (10,513)

Condition: excellent (used), Weinig Four-Side Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: 5.5 kW bottom spindle, 7.5 kW right and left spindle, and 7.5 kW top spindle - Vertical spindles with vertical and horizontal adjustment - Electrically height-adjustable feed rollers - Electrically height-adjustable top spindle Knsdpfox E Rxuox Aanef - Steplessly adjustable feed speed - Weinig head alignment device The machine is in very good condition and runs vibration-free.

Condition: used, Technical Data: Work Table Dimensions: Electrically adjustable table height Belt guard Pressure device Wheel diameter: 195 mm Extraction port: 2x120 mm Horizontal table movement Built-in fan Power supply: 400 V Belt sander motor power: Overall Dimensions: Knedjwxtiispfx Aanef Length: 2000 mm Width: 4400 mm Height: 1600 mm

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Knodpfex A Imzex Aanof Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: used, Year of construction: 1984, incl. Eumacop feed, table size: 1100 x 760 mm, table height: 870 mm, speeds: 3000/4500/6000/9000 rpm, height adjustment: 120 mm, weight: approx. 700 kg Knsdsw E E Epopfx Aanjf Storage location: Nattheim

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Knedox Dq Rrspfx Aanof Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: used, functionality: fully functional, mileage: 2,14,006 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,750 mm, overall weight: 3,500 kg, empty load weight: 2,453 kg, first registration: 03/2020, next inspection (TÜV): 04/2026, loading space length: 3,445 mm, loading space width: 1,750 mm, loading space height: 1,800 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, summer tires, traction control, truck registration, Ford Transit Panel Van FT 350 2.0 TDCI DPF L3 Trend with extensive special equipment. Truck registration Audio system 21 Airbag package Blind spot assistant Active park assist Load compartment protection package 2 Visibility package 3 Seat package 15, 3-seater Reversing camera Air conditioning Rear-wheel drive 6-speed manual transmission Permissible gross vehicle weight: 3,500 kg Curb weight: 2,453 kg Payload: 1,047 kg Wheelbase: 3,750 mm Vehicle dimensions: Length 5,981 mm, Width 2,059 mm, Height 2,546 mm Cargo area dimensions: Length 3,445 mm, Width 1,750 mm, Height 1,800 mm Full service history through Ford service centers. Last Ford service completed in 08/2023 at 165,616 km mileage. Please, no email inquiries! For questions, we are happy to assist you by phone. This vehicle description serves solely as an overview of the vehicle and does not constitute any guarantee in the legal sense of sales law. Information on accessories is given without obligation. Subject to change, prior sale, and errors! We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal! Knjdex I Apwopfx Aansf

Condition: excellent (used), Weinig Four-Sided Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: bottom 5.5 kW, right and left spindles driven by a 5.5 kW motor, top spindles powered by 5.5 kW Kedpfx Asx E Rtxsansnf - Electrically height-adjustable feed rollers - Infinitely variable feed speed - 4 steel planing knives, each with 4 blades The machine is in very good condition and runs smoothly without vibrations.

Condition: good (used), Year of construction: 2006, WEINIG MOULDER MACHINE MOD. UNIMAT 500 YEAR 2006 - EC STANDARD Kedsq Ru Dyspfx Aansnf PRICE ON REQUEST

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation Kodpfexz Hh Uox Aansnf ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: Knjdpfjq Au Tljx Aanjf 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared Knodpfjx Dq Rfsx Aanef No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: excellent (used), functionality: fully functional, mileage: 1,46,332 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,081 mm, overall weight: 2,200 kg, empty load weight: 1,481 kg, first registration: 06/2020, next inspection (TÜV): 09/2026, loading space length: 2,065 mm, loading space width: 1,160 mm, loading space height: 1,200 mm, emission class: euro6, color: white, number of seats: 2, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, truck registration, winter tires, Very clean and well-maintained ex-lease vehicle with full service history from 1 owner, featuring extensive special equipment. Renault Kangoo Rapid MAXI Blue dCi 95 Extra Long L3 with double sliding doors, air conditioning, rear parking sensors, CD radio with MP3, Bluetooth, AUX, USB, all-season (M+S) tires, and more... Truck registration Euro 6 ABS with EBD Front storage compartments Dual airbags Electrically adjustable and heated exterior mirrors Outside temperature display Brake assist with automatic WBA activation in emergencies Digital clock in instrument cluster Tachometer ECO mode ESP and hill-start assist Electric front windows 6-speed manual transmission 180° rear swing doors Height-adjustable front headrests Plastic floor in rear Solid paint Height-adjustable steering wheel Storage package Fabric upholstery Radio pre-installation with roof antenna Spare wheel Particulate filter Wheels: tire size 195/65 R 15 C M+S, new front tires, rear tires approx. 70% tread Gear shift indicator Protection bar behind driver's seat Side protection strips Side impact reinforcement Power steering Engine protection Knodsx I An Hjpfx Aanef Tie-down points in load compartment floor Electronic immobilizer Central locking with remote control Rear parking sensors Air conditioning with pollen filter Sound & Climate Bluetooth package CD radio with MP3, Bluetooth, AUX, USB Left sliding door Right sliding door Partition with window Trim of wheel arches & load compartment sides to roof height Tie-down points in the load compartment floor Wheelbase: 3,081 mm Cargo area dimensions: length 2,065 mm, width 1,160 mm, height 1,200 mm Full service history exclusively with Renault authorized dealers. Last Renault service performed in 04/2024 at 139,917 km. Brake discs and pads all around as new. Renault mobility guarantee valid until 24.04.2026, extendable. Vehicle available immediately. For questions, feel free to contact us by phone. The vehicle description is provided solely for information purposes and does not constitute any guarantee in the legal sense. Equipment details without guarantee, subject to changes, prior sale, and errors excepted! We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: excellent (used), Leadermac LMC 525 Four-Sided Wet Planer - Maximum planing width: 25 cm - Maximum planing height: 20 cm - Bottom spindle: 5.5 kW - Right spindle: 5.5 kW - Left spindle: 5.5 kW - Top spindle: 7.5 kW - Universal spindle: 7.5 kW - 3 feed rollers in the table + lubrication pump - Hardened chrome tables - Stepless feed speed adjustment Knodpfx Aaox E Rh Asnjf In excellent condition. Original. Nothing repainted.

Condition: as good as new (ex-display), machine/vehicle number: G-V7-LBM2200-2S-RL-400-Schweiz, Exhibition machine Hans Schreiner long hole drilling machine with one-hand operation. Optimum work thanks to fixed table and movable drill head. Standard with left/right rotation, dowel drilling device and 2-speed motor including tool compartment, eccentric clamp, miter stop Technical data: Motor output 3.8 kW Voltage 400 V Table size 570 x 300 mm Max. drilling depth 150 mm Side travel 290 mm Height adjustment 140 mm Dowel drilling device 16, 20, 22, 25 mm hole spacing Max. drill holder 20 mm Speeds 1400/2800 rpm Weight 140 kg Knsdpfsvw Edqox Aansf Suction connection 100 mm Packaging dimensions 855 x 600 x 1160 mm Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Kedox Itrvepfx Aanenf Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: used, mileage: 5,70,000 km, Year of construction: 2012, Serial number: YS2P4X2000208xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21901 Specifications: - EU-approved before delivery - Km: Approx. 570,000 + - - Transmission: Automatic - Full air suspension - Euro 5, 280 hp - Engine brake - Good tires - Central lubrication - 4x2 - Zepro Liftgate, 2000 kg - Remote control - Bunk - 18 Pallet cabinet - Radio/CD - Air conditioning/AC - Services have been done at Scania and Local - Ready for delivery Description: Knedpfexznn Asx Aanjf Scania P280 box truck from 2012. The car will be EU-approved before sale. The car is equipped with a liftgate and central lubrication. Ready for delivery. Km: 570000 HK: 280 Technical approved: no EU-approved until: 09.10.2025 Own weight: 10000 Total Weight: 19000 Payload: 8925 Width: 260 Length: 1010 Euro: 5 Model: P280

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Kodpox Dq I Defx Aanjnf Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Kedpfx Ajxg Sa Hsanonf Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: refurbished (used), Year of construction: 2000, Model BMTH 6.1,50 Knsdpfx Ajhgv Rkoanjf Year 1985 Technical data: Working length: 6010 mm Bending capacity steel 400 N/mm²: 1,50 mm Bending capacity alu 190 N/mm²: 2,00 mm Stands + Tension arms: 7 pcs Incl. 10-angle control Incl. powered cutter

Condition: used, functionality: fully functional, table length: 2,900 mm, table width: 1,000 mm, height adjustment type: mechanical, grinding belt length: 7,800 mm, grinding length: 2,500 mm, working width: 1,000 mm, Height-adjustable and movable support table 2.9 m x 1 m. Includes 1x pallet with sanding belts (stainless steel) Includes 1x carrier with vices for clamping bar material Includes 1x sanding disc Includes 1x sanding roller Kjdpfx Aex Eimzoansnf

Condition: used, Year of construction: 2003, Table length: 2500 mm; Table width: 800 mm; Max. table stroke: 650 mm; Column offset: 1000 mm; Pressure shoe: 600; Grinding shoe length: 300 mm; Grinding shoe width: 150 mm; Sanding belt length: 6400 mm; Sanding belt width: 150 mm; Belt air-blast device: No; Upper belt cover: present; Belt speed 1: 18 m/sec; Belt direction: left/right; Weight approx.: 390 kg; Motor power: 3 kW; Extraction diameter: 2x100 mm Storage location: Kedpfxorc I N Ss Aanjnf

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer Ksdpfx Aasx Azw Hsnsnf No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Kodpfsulnr Ajx Aanonf Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Condition: refurbished (used), functionality: fully functional, Year of construction: 1989, Used Biegemaster long-folder model BMTH 6.1,25 Year 1988 Knjdpfx Asxpgagoansf Technical details: Working length: 6000 mm Bending capacity steel 400 N/mm²: 1,25 mm Bending capacity aluminum 190 N/mm²: 1,50 mm Stands and Arms: 5 pcs. Incl. Electric cutter Incl. Standard control

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Kjdpfx Aaex Azwgenonf Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed