Used Long Moulder for sale (7,140)

Condition: excellent (used), functionality: fully functional, Wadkin GD 220 Moulder Planner Dodpfxezr I S No Ai Secn

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: CE10008011, working width: 230 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 160 mm, total width: 1,930 mm, total height: 1,800 mm, total length: 3,650 mm, overall weight: 3,600 kg, power of feed motor: 3,730 W, spindle speed (max.): 6,000 rpm, workpiece height (max.): 160 mm, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 415 V, table length: 1,800 mm, number of spindles: 5, input frequency: 50 Hz, Gau Jing GN-5S23C five-head four-sided planer moulder in good working order. The machine has been used in our professional carpentry workshop and has been regularly serviced and maintained by our in-house mechanic. It is fully operational and can be seen running prior to purchase. Maximum working width: 230 mm Maximum working height: 160 mm Number of spindles: 5 Dcodpfx Aiozr Nazo Ssn Spindle speed: 6,000 rpm Year of construction: 2011 Serial number: CE10008011 The machine is sold as used and is available for inspection and demonstration by appointment.

Condition: used, empty load weight: 13,950 kg, maximum load weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2010, suspension: air, tire condition: 20 %, load capacity: 51,050 kg, • Extendable • First liftable axle • Self-steering last axle • Hydraulic outriggers • Hydraulic ramps • Winch • Convoy kit • Tie-down rings • Platform height: 93cm • Usable length: 9.75m Dcedpfx Aozqv Hlsi Sen • Extension: 4.50m • Hydraulic widening system • Width: 2.50 to 3.10m • Rear inclined section: 2.00m • Gooseneck: 2.80m

Condition: new, working width: 4010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 4010 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE Djdpfx Aer A Ntwoi Socn - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Grey cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front - 4 speeds with electric speed display - External spindle lock - Milling stop with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top + bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment 220 mm - Table opening 300 mm - Effective length of milling spindle: 1890 mm - Extraction connection: 150/120 mm - with 4-roller feed mechanism Weight: 600 kg Availability: at short notice Dodpfx Aozk Nk Rji Socn Storage location: Röllbach

Condition: used, Year of construction: 2000, Second-hand machine Year of manufacture: 2000 Dcedpfx Ajzk N Rdji Sen The T 110 is SCM’s table router, offering an ideal combination of quality and an affordable purchase price The structure is extremely sturdy For ease of use, all controls are within easy reach on the front of the machine Precise height adjustment of the tool is ensured by a mechanical indicator Spindle tilt from -5 to +45 degrees Table size 1000 x 750 mm Spindle clamping length: 140 mm Spindle overhang from the table: 20 mm Spindle speeds 3,000–4,500–6,000–9,000–10,000 rpm Max. diameter of the tool that can be lowered beneath the table: 320 x 40 mm Profiling tool, max. 250 mm Motor 4 kW Extraction nozzle 120 mm with 3-roller feed mechanism Weight 520 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1991, working width: 220 mm, spindle diameter: 40 mm, working height: 120 mm, total width: 1,500 mm, total height: 1,500 mm, total length: 3,900 mm, overall weight: 2,000 kg, jointer table length: 2,000 mm, number of spindles: 4, chip removal: 10 mm, No. 04530 Four-sided planer and moulder WEINIG Quattromat 22 Used, year of construction 1991, very good condition, machine comes from a one-man workshop Four-sided planing and moulding machine with continuous feed Spindle configuration: 1st spindle bottom / 2nd spindle right / 3rd spindle left / 4th spindle top Infinitely variable feed 6 - 22 m/min Infeed table length 2000 mm Working width 25 - 220 mm Working height 6 - 120 mm Max. material removal 10 mm Diameter of the spindles 40 mm Motor power of the 1st spindle bottom 4 kW Combined motor power of the 2nd spindle right and the 3rd spindle left 5.5 kW Motor power of the 4th spindle top 5.5 kW Serrated steel infeed rollers Rubber outfeed roller Rubber roller in the table Including operating tools and spare rollers Including operating manual as a .pdf-file Dcsdpfx Aszl Uuksi Ssn Transport dimensions approx. 3900 x 1500 x 1500 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile . and other models second hand machine spindle tilting by electric -5 ° / + 45 ° Dsdpovzghrofx Ai Sjcn spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000

Condition: used, includes: Slot drilling attachment Table milling machine Heavy-duty roller table From a private seller Used, in good condition, little use Manufacturer: Rex Type: TFZ-D-4 Machine No.: 15,842 Dust extraction connection: D 120/140 mm Space requirement: approx. 1800 x 2000 x 1100 mm Weight: approx. 1200 kg Dcsdpfx Aeycxg Tji Ssn Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty

Condition: new, functionality: fully functional, Year of construction: 2026, A STURDY GIANT FOR THE PRODUCTION OF NATURAL GAS PIPELINES Exclusive Features: • Max Pipe Length: 12.000 mm • Max Bending thickness (mild Steel): 12.000 x 28mm • 3 rolls with Variable Axis configuration • Anti-deflection System for Top roll • Anti-deflection System for Bottom Rolls • 3 rolls drive • Automatic Pipe Ejection System Capacities for Material Yield 360Mpa 12.000 x 17mm a D= 1500mm 12.000 x 15mm a D= 550mm 6.000 x 22mm a D= 1500mm 6.000 x 19mm a D= 550mm Dedpegurb Hjfx Ai Sscn Possibility of adding interchangeable top rolls to reach Higher thickness capacities up to more than 12000x23mm or Smaller Diameters down to 400mm. Available immediately from the factory!

Condition: ready for operation (used), SCM P64 four-sided planer planer table length 2300 mm planing width 180 mm planing height 105 mm Feed speed 6 and 12 m/min spindle diameter 35 mm Axial planing head adjustment for profiling 15 mm Motor power planer 4 kW Dcsdpfst Dwg Tjx Ai Sjn Thicknessing shaft motor power 4 kW Motor power right and left shaft 5.5 kW Weight 1200 kg Dimensions 2820 x 1220 x 1920 mm Condition: Checked for function. All shafts have new bearings Price 5500.

Condition: used, Year of construction: 1994, used, in top condition, excellent features, many accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 exchange spindles, adjustable table insert Manufacturer: SCM Type: T150 Class Year of manufacture: 1994 Motor: enhanced 6 / 7.5 kW Swiveling range: -10° to +45° Motor brake Motor: 2 speeds / pole-reversing Speed stages: 3250/5000/6500/10,000/min Right/left rotation Table size: 2700 x 700 mm Milling arbor diameter: 14 x 30 mm / 1 x 40 mm Milling arbor mount: HSK Milling arbor quick-change system: SK / HSK Table top extension: 2x 650 mm Frame support: extendable Aluminum fence jaws Milling fence with fine adjustment Digital displays for milling fence: diameter, clamping depth, jaw offset Protection and pressure device Control panel on top Control panel: swiveling - electric height adjustment Dcsdjythdvspfx Ai Sjn - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height/swivel/milling fence with 99 programs Digital displays for swivel angle, spindle height, fence depth Swiveling device for milling fence Socket for feed device New price: approx. EUR 40,000 - 45,000 Dust extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1800 mm Weight: approx. 1073 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, functionality tested without overhaul without warranty

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Dedpfx Aezr Rq Isi Sjcn Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: new, Package size: 5 pieces Holzprofi sanding belts, suitable for many different machines from all manufacturers! These top-quality sanding belts deliver excellent results when working with wood and various metals. Thanks to the fully synthetic resin-bonded, semi-open coating and the antistatic properties, they are particularly efficient and durable. Dedpfxszq Dfpj Ai Sjcn Advantages: - High-quality sanding belts for professional use - Fully synthetic resin-bonded for long service life - Semi-open coating and antistatic for best sanding results - Extra-strong backing material for high resistance - Suitable for all types of wood and various metals High quality – Made in Austria! Areas of application: These belt sanding belts are ideal for carpenters, turners and DIY enthusiasts who need a reliable and powerful solution for their sanding work. The following lengths are available: 5900x150mm, suitable for Holzprofi Austria BS220, among others 6150x150mm, suitable for Holzprofi Austria BS220A, among others 6440x150mm, suitable for Holzprofi Austria BS250 and BS220B, among others 6800x150mm, suitable for Holzprofi Austria BS250A, among others 7000x150mm, suitable for Holzprofi Austria BS250B, among others Grit sizes: K40 K60 K80 K100 K120 K150 Prices from 12.00 euros Prices depend on length and design All other sizes are also possible! If you have any questions about the correct length for your machine, please contact us, we will be happy to help. Tel.: 00 43 7613 5600

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Dcsdpfjzvdxajx Ai Son Tool holder SK 50. Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC Dcsdpfxoztvzzs Ai Ssn MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Dcjdpfxozzci Uj Ai Sjn Otherwise, standard version Includes a 3-roller feed device

Condition: new, mileage: 50 km, power: 180 kW (244.73 HP), gearing type: automatic, empty load weight: 2,900 kg, maximum load weight: 3,500 kg, number of seats: 3, total length: 6,100 mm, total width: 2,150 mm, total height: 2,350 mm, fuel: diesel, load capacity: 600 kg, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, onboard computer, Usable box dimensions: 6.10 x 2.15 x 2.35 m LED ceiling lights Luton (overcab sleeping compartment) Wheel covers Rear view camera Multimedia touchscreen USB sockets Bluetooth Automatic air conditioning Automatic headlights Fog lights LED daytime running lights Eco mode Dcedpfex E R Rqex Ai Sjn Start & Stop system Lane departure warning Spare wheel Cruise control and speed limiter Steering wheel controls Overall length: 8.92 m

Condition: ready for operation (used), functionality: fully functional, mileage: 95,000 km, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6d-temp, number of seats: 3, loading space length: 2,937 mm, loading space width: 1,662 mm, loading space height: 1,387 mm, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), traction control, RENAULT TRAFIC L2H1 2.0 dCi 130 HP – YEAR 2022 Renault Trafic L2H1 VEHICLE SPECIFICATIONS • Year: 2022 • Mileage: 95,000 km • Engine: 2.0 diesel Dodpfx Ajzwnt Roi Sscn • Power: 130 HP • Version: L2H1, long wheelbase • Payload: 1,161 kg LOAD COMPARTMENT DIMENSIONS • Length: 2,937 mm • Width: 1,662 mm • Height: 1,387 mm • Width between wheel arches: 1,268 mm WARRANTY AND DELIVERY The vehicle is delivered with a complete service and a 24-month warranty. PRICE € 14,800.00 + VAT For more information or to schedule an appointment:

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty. Dsdpfjztxt Hex Ai Sscn

Condition: new, Long Reach Boom & Arm for Excavators – Custom Made up to 22 m | Dredging, Canal Cleaning & Deep Excavation | Galen Manufacturer Custom-built long reach boom and arm systems manufactured by Galen for excavators that need extended digging depth and reach. Our long reach excavator boom is engineered for dredging, river and canal cleaning, pond and reservoir maintenance, deep foundation and basement excavation, slope profiling and embankment work – any job where a standard boom simply cannot reach far or deep enough. We manufacture long reach booms made to order, with reach up to 22 m and beyond, built from Hardox and Strenx high-strength steel for the best balance of reach, durability and weight. Each long reach boom-arm system is produced with full structural calculation, so that machine stability, hydraulic flow and bucket capacity are correctly matched to the extended geometry. The result is a properly balanced long reach system – not just a longer arm – that works safely at full extension. Supplied as a complete long reach boom + arm conversion or as individual sections, including correct hydraulic piping, cylinders and counterweight recommendations. We produce for all major excavator brands and models – Caterpillar, Komatsu, Hitachi, Volvo, Hidromek, Hyundai, Doosan, Liebherr and others – with mounting matched to your exact machine. Typical applications: dredging and waterway maintenance, canal and ditch cleaning, deep excavation, lake and pond work, slope and embankment shaping, and reach work over water or soft ground. As a manufacturer (not a reseller), Galen offers fully custom geometry, OEM/private-label production, engineering support, and export to Gulf, Balkan, Central Asian and European markets. CE-compliant production available on request. Why choose Galen long reach boom-arm: Dcsdpszfwdbjfx Ai Sjn Custom reach engineered to your machine – up to 22 m+ Hardox & Strenx construction: high strength, low added weight Engineered for stability – balanced geometry, correct hydraulics & counterweight advice Complete long reach system or individual boom/arm sections For dredging, canal cleaning and deep excavation Manufacturer pricing, structural support, worldwide shipping Send us your excavator brand, model, operating weight and target reach, and we will engineer a long reach boom-arm system sized exactly to your machine.

Condition: new, Layout: Backhoe Selling price: € 2.500, US$ 2.678 For special purposes Dcodpfopa Rp Aex Ai Ssn LONG REACH BOOM-ARM DEMOLITION BOOM DEMOLITION ARM DREDGE BOOM-ARM Pries are representative. For detailed information, please contact us

Condition: used, mileage: 3,78,789 km, power: 177 kW (240.65 HP), first registration: 04/2021, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2021, Number of doors: 2 Dsdpfxezzyake Ai Secn Cab: single GVW: 11.990 kg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Crane track rails – steel beams HE-B 300 from an 11-meter long hall Beam width: 300 mm Beam height: 300 mm Middle web: 11 mm Track rail: 50 x 30 mm Beam length: 2 x 10550 mm (total length 21100 mm) - A 5-ton crane ran on these crane track rails. - It was installed in a 10-meter hall. Dcedpfxozinz Ee Ai Ssn - The beams are one-piece, without a butt flange joint. - Consisting of 2 x 10550 mm - White painted Self-weight per meter of crane track rail: 120 kg + 11.7 kg = 131.7 kg/m Self-weight of the crane track rails: approx. 2780 kg

Condition: used, functionality: fully functional, mileage: 30,000 km, power: 152 kW (206.66 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,100 mm, first registration: 11/2025, loading space length: 4,680 mm, loading space height: 1,900 mm, emission class: euro6e, color: black, driver cabin: day cab, suspension: steel-air, number of seats: 3, number of previous owners: 1, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), navigation system, parking sensors, power assisted steering, second-hand vehicle warranty, soot filter, summer tires, traction control, Very new and well-equipped van with numerous options such as air suspension, tow hitch, navigation system, etc. Dedpfx Aiszxrrgs Secn The vehicle is available for immediate delivery.