Used Lump Breaker for sale (895)

Condition: excellent (used), Stainless steel lump breaker, double shaft 2 electric motors, 380 volts, 7.5 kW feed opening: 1510 x 560 mm Lodpjzu Rrwjfx Akmjhn

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: -, type of input current: three-phase, overall weight: 500 kg, Lump breaker for crushing/deagglomerating various materials. Lhsdpfx Akjuvg D Eomen

Condition: used, Used Crusher for Filter Cake / Lump Breaker Lsdpfxsbpia Ds Akmohn Drive: Lenze The crusher for filter cake or lump breaker consists of two horizontal rotating shafts.

Condition: good (used), NNP Kibbler lump breaker Ledpfx Aoqw Uxdokmjhn Stainless kibbler, 7.5Kw motor, 3Ph

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: ABC 8.20, power: 1.47 kW (2.00 HP), fuel type: electric, Clay, sand, and soil feeder - consisting of an 800 mm wide, 2 meter long conveyor belt with a material receiving hopper of approximately 1 m³; - flow rate of 3.25 to 56 m³/h controlled by a frequency inverter Lsdpfov Tlc Sox Akmohn - equipped with a lump breaker/picking arm mounted on a shaft to scrape the material and regulate the flow rate

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Industrial automated COMATEC Solids Big Bag receiving, handling, opening and discharge station for dry bulk solids. The system was designed to reduce manual handling of the bags. The operator places the full Big Bag in the loading area and attaches its lifting loops to the lifting crossbeam. The subsequent lifting, travel and positioning operations are carried out automatically by programmable electric hoists. The installation incorporates a double gantry-type supporting structure equipped with two VICINAY electric wire-rope hoists, each with a lifting capacity of 1,600 kg. The hoists are fitted with electric travelling trolleys and numerically controlled positioning. Each hoist has a 3 kW lifting motor and a 0.55 kW travelling motor, with an approximate lifting speed range of 1.8 to 14.5 m/min. Once positioned above the receiving station, the Big Bag is opened from the bottom by means of a removable and replaceable knife system, allowing rapid product discharge. The material then passes through a COMATEC DRG-300 lump breaker, a K-900-DC circular vibrating screener and a 2,000-litre buffer hopper. From the hopper, the product is metered by means of a tubular screw feeder. The system was originally designed for handling PTA powder, with an apparent bulk density of approximately 0.9-1 kg/dm³. It may also be suitable for other dry powders or granular products, subject to verification of product compatibility, material construction, ATEX classification and the required filtration and discharge arrangements. Main components • Double gantry structure for Big Bag handling. • Two VICINAY 1.6 t electric hoists. • Electrically driven travelling trolleys. • Programmable automatic positioning. • Big Bag lifting crossbeams. • Removable knife system for rapid bag opening. • COMATEC DRG-300 lump breaker. • K-900-DC circular vibrating screener. • 2,000-litre buffer hopper. Ledpfxozvc Duj Akmohn • Tubular screw feeder. • Maintenance platform with open-grid flooring and safety railings. • Level instrumentation. • Associated pneumatic and electrical components. • Carbon-steel support structure.

Condition: used, Year of construction: 1973, operating hours: 3 h, functionality: fully functional, machine/vehicle number: GM900, total length: 17,100 mm, total height: 4,340 mm, total width: 3,363 mm, overall weight: 7,000 kg, frame height: 4,340 mm, frame width: 2,780 mm, For sale is a cross-flow shredder mounted on a VOEST GM900 frame. The cross-flow shredder can be operated with two or three chains. The shredding chamber is open and can be equipped with different grating grids. After shredding, a permanent overband magnet is installed. The system control was newly purchased and installed. The system can be disassembled for transport. Lhedpfx Aoz Sp Ecekmon

Condition: used, functionality: fully functional, Foundry Machines AHB core shooting machine Neuhof lump breaker with discharge grate, 15 tons/hour / Year of manufacture 2012 Inductotherm furnace system, year of manufacture 2000, with accessories Eirich mixer DE 18 Trough belt shot blasting system with tipper HSP 2 single machine Rema rough grinding machine 600Sk - 80 m/sec Sand silo with conveyor Drilling machine VEB BFT 125/5 Frech cold chamber die casting line 1600 tons clamping force Year of manufacture 2015 Control system S/7 Type DAK 1600-133 RC Clamping area 1850 x 1850 With Reis press Metering furnace Molding system HWS, type SFM2 / 30 molds/hour, funnel milling machine Control system S/7 Includes sand preparation with Webac 66B, water dosing Datec Core shooting machine Röper H6.5 - H16, hydraulic - control system S/7 Core sand mixing plant, manufacturer Klein, cold-box mixing plant on rails for up to 4 machines YXLON X-ray system Spectral analysis Spectro Ideco analysis device Ledpjvz Aprsfx Akmjhn Belt grinder Hazardous materials container Drying oven Band saw Molding machines HWS - HSP-2D / Mold dimensions: 840 x 650 x 250/250 mm Year of manufacture 2000 + 2004 Sand preparation with Webac mixer 88B / batch size 1800 kg Core shooting machine 10-20 liters / Year of manufacture 1999, cold-box with ball mixer on the machine Melting furnaces Belt grinder You are cordially invited to view the foundry. Equipment and items are sold in used condition.

Year of construction: 1987, condition: used, Lodige ploughshare mixer type FKM600D with 2x lump breakers. Material: steel. Motor power 11kW. Gross capacity 600 liters. Year of manufacture: 1987. Machine is mounted on a mobile frame. Discharge pneumatically operated. See our other advertisements. VMA Wekerom. Ledpfoxc Exnex Akmohn

Condition: used, Halvor Forberg paddle mixer stainless steel Type: F60 Capacity: 60 liters Equipped with 2 lump breakers Equipped with discharge hopper See our other advertisements Lodsxc I Ewopfx Akmohn VMA Wekerom

Condition: ready for operation (used), functionality: fully functional, Mixer is working disassembled lump breaker Side valve Ljdpfxjunkyzj Akmshn First photo is before the revision and disassembly. mixer is incl. control cabinet and platform with stairs.

Condition: used, functionality: fully functional, Conical mixer steel gross 5000 litres Lodpfxeydu Uvo Akmehn net 3500 litres (70%) 2 outlets: 1x bottom outlet with original ball segment, 1x side outlet with slide gate valve (position for lump breaker) cantilevered mixing screw operates well (dismantled after factory shutdown) including base frame

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Lhodpsxqgv Djfx Akmon Filters: OMT 25 microns Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), functionality: fully functional, Petsmo (Finland) Titan breaker. Can include dolav box tipper as shown. Capable of running at 15-30 tonnes per hour depending upon material. Ledpfxszx Icbj Akmohn

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Lhodpfx Aszbypyjkmen Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: used, Approx. 80 circuit breakers Electronics / PLC controls Technical details: Manufacturer: ABB Type: RC223 Additional information: Manufacturer: ABB Type: RC223 Condition: Good used condition. Fully functional until removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Lhjdpfx Akozu Tnhomjn Subject to technical changes, errors, and prior sale.

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Lhsdpfez Slqvox Akmen Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number, he will be happy to assist you. JAB Hydraulic Hammer / Hammer / MS03 / in stock & immediately available Price: €3,490.00 net / €4,153.10 gross - Weight (kg): 336 - Length with chisel (mm): 1,500 - Chisel diameter (mm): 70 Equipment: - incl. MS03 adapter plate Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. Lhjdpfx Aoznrr Eekmen In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: JW10GC = Further Information = Intended use: Construction Unladen weight: 336 kg Please contact Marius Herden for further information.

Condition: used, Attachment suited for: Construction machines Lodsz S E R Iepfx Akmjhn

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Lhsdo Aax U Ijpfx Akmjn Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Lodpfoyacyxsx Akmjhn

Condition: used, Manufacturer: ABB Type: E3N 32 Lhjdpsz I Rn Nefx Akmjn Capacity: 3200 A Price per unit

Condition: used, axle configuration: > 3 axles, first registration: 12/2005, total length: 12,590 mm, total width: 2,500 mm, suspension: air, tire size: 385/55 R 22.5, wheelbase: 9,860 mm, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Tire size: 385/55 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 45%; Tire tread depth right: 45% Rear axle 2: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Tire tread depth left: 60%; Tire tread depth right: 60% Lhjdpfx Akez R Ditemen Rear axle 4: Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,500 kg Payload: 45,500 kg GVW: 53,000 kg Condition Damage: none Identification License plate: OJ-17-DH

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Available immediately Lsdpfjxy Idhsx Akmehn

Year of construction: 2024, condition: used, Year of manufacture: 2024 New: Yes Empty weight: 35 kg Dimensions of cargo space: 51 x 20 x 85 cm Serial number: 9305082 Lhodjyaf Sqepfx Akmon Please contact Team DPX for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available