Used Machining Center 5 Axis for sale (76,158)

Condition: good (used), Year of construction: 2000, Hello Kedpfx Astt Ntfeansfa I have for sale a 5 axis CNC milling center DECKEL MAHO DMU 50 V evolution. The machine is connected and working. _ Type: 5 axis milling center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Year of manufacture: 2000 _ Machine parameters: - number of axes: 5 - working table dimensions (length x width): 500 x 380 mm - maximum spindle speed: 18,000 rpm - spindle power: 15 kW - X/Y/Z axis travel: 500/420/380 mm - C/B axis travel: 180/360 degrees - maximum feed rate: 20 m/min - total power: 40 kVa - machine dimensions (L x W x H): 2800 x 2300 x 2600 mm - total weight: 6000 kg

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Kodpjwd N D Tjfx Aanofa Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 240 mm, spindle speed (max.): 42,000 rpm, table load: 60 kg, overall weight: 6,000 kg, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine is completely overhauled, tested and measured in our company. The machine meets the new machine tolerance again! Travel paths: X455mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - 42-way tool changer - High-precision cooling device for the entire machine (hysteresis +/- 0.15K) - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/cone angle) and wear monitoring including tool cleaning before measuring - Handbox - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - HSK40E spindle with max. 42,000 rpm - Erowa ITS100 zero point clamping system integrated in the machine table - Automation package for retrofitting the machine with a pallet changer - Handbox Kfedpfxott Atwo Aanoa A tour of the machine in Ready-to-use condition is possible at any time. You are welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 2011, 1 used 5-axis machining center Manufacturer Quaser Type MF 400/12 C Serial no. 306B110024 Year of manufacture 08/2011 Control, Siemens, type 828D, Technical data Spindle mount Bt 40 Spindle speed 12000 rpm Number of tool positions 48 Travel path x 410 mm Travel path y 610 mm Travel path z 510 mm Diameter of rotary table 400 mm Swivel range 30 – 120 degrees axis A Axis B 360 degrees Kedpotr Um Tofx Aansfa Connected load 21 KVA Own weight 7,300 kg, Dimensions L/W/H = 282x250x307, Equipped with Internal spindle cooling Chip conveyor

Condition: excellent (used), X 885, Y 800, Z 500mm, A 30-120dg, C 360dg. HSK 63 Big Plus, 15,000Rpm, ATC 60 pos, Renishaw probe, Heidenhain TNC 530. Kjdewzv Igepfx Aanjfa

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 7,470 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 15, Equipment: chip conveyor, documentation/manual, No minimum price – guaranteed sale to the highest bidder! Original price was approx. 200,000 EUR TECHNICAL DETAILS Travel path X-axis: 7,470 mm Travel path Y-axis: 590 mm Travel path Z-axis: 400 mm C-axis: 360° A-axis: available Number of axes: 5 Software: ITALCAM 3D Electrospindle power: 12 kW (0/24,000 rpm) Maximum torque: 9.5 Nm at 12,000 rpm Spindle speed: 24,000 rpm Spindle nose: HSK 63 F Number of spindles: 1 Number of slots in the tool magazine: 15 Spindle cooling: liquid Work area: 2 Machinable sides: 5 Standard clamping devices: 12, independently positionable Tool magazine: 15-position tool holder mounted on the slide Clamping force: 130 kg per clamping device Lubrication nozzles: 1 at the electrospindle Tank capacity: 2.2 liters Slide lubrication: automatic MACHINE DETAILS Dimensions (L x W x H): 9,800 x 3,100 x 3,000 mm Transport dimensions (L x W x H): 9,500 x 2,150 x 2,500 mm Weight: 3,500 kg Rated power: 18 kW Current consumption: 32 A Voltage: 400 V three-phase with transformer Frequency: 50/60 Hz Air pressure: 7 bar Accuracy: 0.1 mm Operating temperature: 10 to 35 °C Kfedpfx Aowqfi Esanja Air humidity: 75 % Standard colors: RAL 7015 Chip conveyor system: chip conveyor belt Machine safety: safety light barrier on three sides of the machine Operating interface: 17-inch LCD monitor EQUIPMENT - Documentation/manual - Infinitely variable speed setting - Chip conveyor - USB port on the control panel

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, New spindle in 2023 Kjdpfx Aswtq Swoanjfa TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Table size: 800 x 635 mm Control: Heidenhain Spindle speed: 0 - 12,000 rpm Milling spindle drive: 10.0 kW Tool holder: ISO 40 MACHINE DETAILS Machine weight approx.: 11 tons Connected load: 44 kVA Maximum current: 64 A

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC Kedpfjpkyn Rsx Aanofa

Condition: ready for operation (used), Year of construction: 2011, operating hours: 3,500 h, functionality: fully functional, travel distance X-axis: 410 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 100 kg, spindle speed (max.): 1,500 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, TECHNICAL DETAILS Control: Heidenhain iTNC 530 Smart NC X-axis: 410 mm Y-axis: 610 mm Z-axis: 500 mm Table data Table size: 320 x 320 mm Kedpfsvzacpsx Aanjfa Maximum table load: 100 kg C-axis: 360° B-axis: +30° to -120° Spindle & tool holder Speed: 15,000 rpm Tool holder: SK 40 Tool changer: 48 positions MACHINE DETAILS Total power requirement: 35 kVA Machine weight: approx. 7.4 t Space requirement: approx. 4.15 x 3.8 x 3.28 m Machine switched on: approx. 9,600 h Spindle running time: approx. 3,500 h EQUIPMENT - Chip conveyor - IKZ 20 bar (internal cooling through the spindle) - Electronic handwheel - 3D measuring probe and KinematicsOpt for optimal machine calibration

Condition: good (used), Year of construction: 2005, Tool holder BT 40, 12.000 rpm, 60 tool places in tool changer, 70 bar IKZ, Kfodpfx Aaowbaqlonoa laser Renishaw OMI-2. Parts shown by hand not come.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 680 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 625 mm, rotational speed (max.): 15,000 rpm, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 65 °, Machining center with large tool magazine with 240 slots and pallet changer for 40 units TECHNICAL DETAILS X-axis: 680 mm Y-axis: 400 mm Z-axis: 625 mm B-axis: +65º to -110º C-axis: 360º Distance pallet-spindle nose: -86 mm to 540 mm Distance pallet center-spindle nose (B-axis -90º): 60 mm to 685 mm Distance pallet center-column guide: -25 mm to 375 mm Distance spindle center-column guide: 227 mm Distance floor level-pallet surface: 1,165 mm Control: Fanuc 16iMB Spindle details Spindle speed: 40 – 15,000 rpm Spindle taper: 7/24 steep taper #40, Big PLUS Spindle diameter: 80 mm Spindle torque: 135 Nm / 850 rpm Spindle power: 15/7.5 kW Feed and rapid traverse Rapid traverse X/Y/Z: 30 m/min B-axis: 10 rpm C-axis: 13.5 rpm Feed X/Y/Z: 1 - 15 m/min B-axis: 1 - 2,160º/min C-axis: 1 - 3,600º/min Tool and Pallet Number of tools: 240 Max. tool Ø: 80 mm Max. tool Ø with empty adjacent stations: 150 mm Max. tool length: 260 mm Max. tool weight: 8 kg Pallet changer with: 40 pallets Workpiece dimensions Max. workpiece diameter: 360 mm Max. workpiece height: 250 mm MACHINE DETAILS Year of manufacture: 2003 Commissioned: 2004 Machine weight: 11,700 kg Installation area: 4,945 x 3,655 mm Kfodpfx Ajwqc Ufoanoa Machine height: 3,210 mm EQUIPMENT - Encoders for B and C axes - Direct measuring system Heidenhain for X, Y, and Z axes - 30 l/min / 20 bar internal cooling - Scraper belt chip conveyor - Timer Power on / Power off - Measuring probe RENISHAW MP 10 Easy Probe - Laser Renishaw NC 1 - 2 MB memory - 8 additional M-functions - Number of tool corrections: 999 - Increase of workpiece coordinate systems from: 6 to 54 - Coordinate system rotation: G68/G69 - Automatic zero point tracking - Program restart

Condition: like new (used), Year of construction: 2009, operating hours: 47,443 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, torque: 980 Nm, controller manufacturer: Siemens, controller model: 840D-Powerline, total height: 2,900 mm, total length: 4,950 mm, total width: 5,060 mm, table width: 800 mm, table length: 630 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,963 h, coolant supply: 40 bar, spindle motor power: 32,000 W, number of slots in tool magazine: 180, CNC controller: Siemens 840D-Powerline Axes X-axis travel mm: 800 Y-axis travel mm: 800 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø800x630 Max. workpiece weight kg: 1000 Table rotation speed rpm: 8000 max. torque Nm: 980 Kfodpfsui Np Rsx Aanoa Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 180 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Signal lamp 3D quickSET Machine interface for FASTEMS system Paper band filter Machine running times Under power: 47443 Spindle Working: 22963 Basic machine dimensions / weight Length mm: 4956 Width mm: 5064 Height mm: 2900 Weight kg: 14000

Condition: excellent (used), Year of construction: 2006, 5-axis CNC machining center 2006 Kfsdpfjwn A Sljx Aansa Control: Heidenhain iTNC 530 Technical data: x-axis travel 880 mm y-axis travel 630 mm z-axis travel 630 mm Max. torque 130 Nm tool holder SK 40 (ISO 7388IIB) swiveling B: 103° Work table: Clamping surface 1,250 x 700 mm Rotary table diameter 700 mm rotatable C: 360 ° Max. table load approx. 500 kg T-slots 11x 14mm x 63mm Tool magazine: Number of tool places 32 (2x 16) pos. tool holder SK 40 (ISO 7388IIB) Max. tool diameter 80 / 130 mm Max. tool diameter with free neighbor box 160 mm Max. tool length 315 mm Max. tool weight 8.0 kg

Condition: used, Year of construction: 2017, AWEA FCV 620 year 2017 FANUC OiMF Manual Guide 2x Tool probe Renishaw X-axis travel: 635 mm Kfodpfx Aaovy H U Njnea Y-axis travel: 535 mm Z-axis travel: 460 mm B-axis rotary range: -50° ~ +110° C-axis rotary range: 360˚ Table diameter: Ø 650 mm Spindle taper: BT40 Spindle speed :Direct drive 12,000 Cooling through the spindle Spindle motor (cont./min): 11/15 kW (FANUC 12,000 rpm) X / Y / Z axes rapid feed rate: 36 m/min. Tool magazine capacity: 32T Weight 8500kg

Year of construction: 2004, condition: good (used), functionality: fully functional, including robot arm FANUC Robot ARC Mate 120iB TECHNICAL DETAILS X-axis: 700 mm Y-axis: 400 mm Z-axis: 360 mm speed: 10.000 rpm Control: Fanuc 16i MB Table diameter: 1400 mm feed X-axis: 10000 mm/min. feed Y-axis: 10000 mm/min. feed Z-axis: 10000 mm/min. rapid traverse: 70 m/min tool holder: Big Plus ISO/Bt/Mk Spindle power: 21 kW Torque (Twin / Single): 120 / 155 Nm number of tools: 2 x 30 tool diameter: 140 mm tool length: 280 mm milling capacity: max. 350 ccm Kjdpfsl Eykgox Aanefa Drill diameter: max. 40 mm Thread diameter: max. M27 MACHINE DETAILS length: 6000 mm width: 6000 mm height: 2800 mm weight: 12000 kg Total connected load: 55 kVA Total power consumption: 44 kW Voltage: 400 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2009, controller manufacturer: Siemens, controller model: 840, Milling machine DMU 70 Evolution ° Year of manufacture: 2009 • Axes: 5-axis simultaneous Kfjdetxx Dqjpfx Aanea • Tool holder: HSK 63A • Tool positions: 2 x 16 magazine positions • Control: Siemens 840D powerline • Max. speed: 18000 • Travel paths: ° X-axis 750 mm ° Y-axis 600 mm ° Z-axis 520 mm • IKZ – internal coolant supply – 40 bar • Coolant tank: 980l

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, workpiece diameter (max.): 32 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 30,000 rpm, overall weight: 1,700 kg, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, WILLEMIN MACODEL W408 MT TECHNICAL CHARACTERISTICS : Kedpewu Ruhsfx Aanefa Year : 2007 CNC control : FANUC 16i-MB Number of axes : 5 Stroke X axis : 250 [mm] Stroke Y axis : 200 [mm] Stroke Z axis : 300 [mm] Traversing feeds X, Y and Z axes : 30000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 6000 [rpm] Main spindle max. power : 3.7 [kW] Angular C axis stroke : 360 [°] B axis swivelling stroke : 115 [°] Spindle type : HSK-E40 Min. spindle speed : 500 [rpm] Max. spindle speed : 30000 [rpm] Spindle power : 10 [kW] Tool changer magazin number of stations : 48 Max. tool lenght : 95 [mm] Max. tool diameter : 63 [mm] Lubrication tank capacity : 80 [l] Collant pump flow rate : 40 [l/min] Rated current : 25 [A] Supply voltage : 400 [V] Weight : 1700 [Kg] EQUIPMENT INCLUDED : x1 0-90° pivoting backworking unit (6th side machining) x1 backworking vice x1 RENISHAW TS27R tool probe x1 RENISHAW NC4 TX laser system for tool setting and tool breakage detection x68 type F35 turning collets x9 HSK-40E milling/turning attachments x1 IEMCA BOSS 332 E bar feeder x1 spindle chiller x1 cutting fluid chiller x1 ELBARON mist extractor x1 3-colour status lamp x1 CO2 automatic fire extinguishing system (to be checked by the purchaser with a competent body) x1 set of technical manuals Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. HERMLE , DMU , monoblock , variaxis , chiron

Condition: excellent (used), Year of construction: 2009, 5-axis Machining center. X 700, Y 550, Z 450mm, HSK E50 36,000Rpm, ATC 56 Pos. Kfsdpfx Aowzvqbeansa

Condition: new, Year of construction: 2024, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 640, General Spindle: direct drive Speed: 12,000 rpm Power: 34 kW Torque: 180 Nm Tool holder: SK 40 Tool changer: 60 stations Working area Travel path X: 620 mm Travel path Y: 520 mm Travel path Z: 460 mm Rotary/swivel table: D= 650 mm Ksdpfx Aovyp Dmeanofa Table load: 300 kg C-axis: resolution 0.001 degrees Other Rapid traverse X/Y/Z: 36 m/min Max. speed B-axis: 25 rpm Max. speed C-axis: 25 rpm Equipment Chip management: chip conveyor Workpiece measurement: Renishaw OMP 40 Automation: prepared

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, number of slots in tool magazine: 60, tool length: 315 mm, tool diameter: 160 mm, Equipment: chip conveyor, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center Kjdpfxjwt N Tyj Aanjfa The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. The machine is ideal for complex and high-speed machining thanks to its ISO 40 taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Axis travels: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum resolution of 0.001° Table: 630 x 500 mm, maximum load 500 kg Rapid traverse: up to 50,000 mm/min Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece probing system, chip conveyor, coolant tank with pumps, high-pressure pump through spindle, spindle chiller, transformer, manuals, and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Year of construction: 2024, condition: new, 5-axis CNC machining center for processing aluminium, steel, light metals and PVC. Bolero 5 has a massive machine bed. The machining spindle is a 17 kW (S6) electrospindle with HKS 63F cone. The maximum speed is 24,000 rpm, controlled by a frequency converter. Bolero 5 has an automatic tool changing system with a 12-place magazine. The work area is equipped with 8 automatic positioning motorized vices controlled by the CN. The travel range of the X-axis is 7,000 mm (optional extension to a total of 9,400 mm). Pendulum machining is also available if desired (optional). It is operated via a PC Windows with a 17" color screen. The machine is equipped as standard with safety and protective devices in accordance with EC directives. It is always possible for you to inspect the desired system in our production/demonstration hall. Kfsdpfx Aashy S Hmjnsa Please do not hesitate to contact us.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 174 h, functionality: fully functional, machine/vehicle number: VT0620, High-Performance Machining Center SPINNER VC850 Travel ranges X850, Y510, Z510 mm "Advanced" configuration variant with patented guideway cover design Base machine configured as VC850-5A Including rotary-tilt table D=350mm High-performance milling spindle up to 12,000 rpm Power 22.6 kW / 108 Nm as built-in hybrid spindle with direct drive (no belt) This results in a particularly low machine height of only approx. 2,420 mm Spindle tool interface SK40 DIN69871 TOOL MAGAZINE with 48 tool stations MAGAZINE DOOR pneumatically operated within the work area DIRECT MEASURING SYSTEMS on X/Y/Z axes HEIDENHAIN TNC640 control, height adjustable, with angle-adjustable keypad: - Path control with 19" multi-touch screen in stainless-steel design PORTABLE HANDWHEEL HR510 FS "Advanced Function Set 3" option number 21 "CAD Import" option number 42 Kedpfx Ajw Auryoansfa "KinematicsOpt" option number 48 "Advanced Function Set 1" option number 8 "Advanced Function Set 2" option number 9 "Touch probe functions" option number 17 Energy-saving function incl. automatic machine shutdown TNC 620 / TNC 640 Heidenhain software option "Heidenhain DNC" option number 18 Fully integrated 2-axis ROTARY-TILT TABLE SPRT-350 centrally mounted in the work area with: - Rotary table with faceplate D=350mm - Tilting range A-axis -110 / +46 degrees - Additional clamping plate approx. 200x350mm arranged to the left - Counter bearing to support the rotary table bridge - High-precision direct measuring systems centrally on both rotary axes - Hydraulic brakes per axis, holding torque 3,600Nm DUAL ROTARY FEEDTHROUGH in the center of the C-axis UNIVERSAL CHIP CONVEYOR VC850 discharging to the RIGHT from the machine PREPARATION of the spindle FOR HIGH PRESSURE for auxiliary tank use up to 70/80 bar HIGH PRESSURE TANK 70bar with paper band filter for central through-spindle flushing Blow air at the spindle head Compressed air centrally through the milling spindle Rinsing gun PREPARATION FOR SPINNER STANDARD PROBE Blum Wireless SPINDLE PROBE Spinner-Blum with tool interface matching the milling spindle Electrical PREPARATION FOR EXTRACTION AUTOMATIC DOOR for the workspace door Universal robot interface UNIROB I/O PACKAGE consisting of: 4 free M-functions with 2 PLC outputs I/O 24VDC 4 PLC inputs for feedback from the 4 M-functions Wired to terminal strip in the control cabinet STANDARD DOCUMENTATION 3D MODEL (CAM) LIFTING EYE BOLTS for crane unloading STANDARD 2-TONE PAINTING in light grey RAL7035 and blue grey RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN-system (5-wire) Notes: The price includes warranty services only within Germany. For new and demo machines, images may not necessarily represent the individual machine but rather comparable units. Depicted accessories such as clamping devices or tool holders are included only to the extent listed in the technical description. Please request a detailed ex works quotation. Visit our factory near Munich or one of our showrooms. We may also have similar machines available. Subject to prior sale.

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Heidenhain TNC 640, total height: 29,620 mm, total length: 32,000 mm, total width: 28,480 mm, table load: 200 kg, rotary table diameter: 380 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 36 bar, Equipment: chip conveyor, documentation/manual, Victor 5-Axis Machining Center VC-AX380 with Heidenhain TNC640 Control 5-axis simultaneous machining incl. calibration tool KinematicsOpt incl. calibration ball. Standard options: -Cooling system with high-pressure coolant pump MTH4-40/4 and supply hoses -Full protection coolant cabin -Spindle oil cooler -Oil separator -Spiral chip conveyor -Rinsing gun and air gun -Operating tools and manuals Additional options: -Air through the spindle -Air conditioning unit in the control cabinet -Chip conveyor -40 tools -36 bar ICS with Mahle Duplex Kfedpfxoq Tafxs Aanja -Table rinsing -Workpiece measurement TS460 -Automatic door -Interface -8" 3-jaw chuck Images are exemplary and may differ. From stock Bergneustadt (subject to prior sale)

Condition: excellent (used), 5-axis work center, ISO 40 spindle attachment, 22000 rpm, Xmm850 axis, Y420, Z420, tilting and tilting table Kedpfxewcdv Ie Aanjfa

Condition: used, Year of construction: 2017, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, Table size 600mm × 500 mm. Max workpiece size 730mm × 450 mm. Max capacity on table 500 kg. X/Y/Z travels 850mm/550/510mm. B axis (table tilt) 210 º (-120º +90º). C axis (table rotation) 360º. Min/Max distance spindle nose to table top 70mm – 580 mm. Rapid feed (X/Y/Z Axis) 30m/min. Rapid feed B/C Axis 30 rpm. Min indexing increment B axis 0.0001º.Min indexing increment C axis 0.0001º. Maximum working feed 30m/min. Number of simultaneous axis 5. Spindle taper BT 40. Maximum spindle speed 12,000 rpm. Main spindle power 11/7.5 kW. Maximum spindle torque 65 Nm. Automatic tool changer 30 positions. Random tool selection. Total power requirement 40.9kVA. Max tool diameter 90mm (with tools either side). Maximum tool diameter 130 mm (no tools either side). Max tool length 300 mm. Max tool weight 8 kg. Features include synchronised Tapping. Cromar Swarf conveyor. Renishaw probe. High pressure through spindle coolant 15 Bar. Coolant tank capacity 500 litres. Tool presetter. Synchronised spindle turning angle with cylindrical interpolation. Manual pulse generator with wire (portable handwheel). Programable air blast by spindle nose. Cylindrical interpolation. Kfodex I Nvqjpfx Aanea Machine dimensions L x W x H 2400mm x 3325mm x 3060mm . Approximate weight 11000 kg.