Used Maintenance Furnace for sale (7,828)

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,052 h, load capacity: 15,000 kg, lifting height: 3,180 mm, fuel type: diesel, mast type: simplex, construction height: 2,940 mm, fork carriage width: 1,700 mm, fork length: 1,100 mm, empty load weight: 25,060 kg, total length: 3,800 mm, drive type: Diesel, construction width: 2,000 mm, Compact forklift – Diesel Load center: 600 Fork width: 160 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Pgodpfx Aloz Ewb Dowot Front tire size: 40x20x30 Rear tire type: Solid tires Rear tire size: 28x12x22 Description: In addition to this autumn model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this ATAIR IV D 150CV Super Compact. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner Fork positioner opening range: 350/1120 mm Heater, full cab

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 7,502 h, load capacity: 4,500 kg, lifting height: 6,500 mm, free lift: 1,998 mm, fuel type: gas, mast type: triplex, construction height: 3,218 mm, fork carriage width: 4,000 mm, fork length: 1,400 mm, empty load weight: 7,870 kg, total length: 2,190 mm, drive type: Treibgas, construction width: 2,570 mm, Four-way side loader Load center: 700 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Podpfx Aoz Ewgtslwjgt Technical condition: very good Front tire type: Superelastic Front tire size: 2.50-15 Rear tire type: Superelastic Rear tire size: 200/50-10 Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are available at any time. We also gladly purchase your used forklifts, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DQ45-G. P.S.: Our forklift master workshop specializes in the repair, maintenance, overhaul, and custom modification of forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Fork positioner, Fork positioner opening range: 500/4,000 mm Heater, full cab, full free lift, Platform height: 600 mm; camera

Condition: new, functionality: fully functional, power: 197 kW (267.85 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-200 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: -Bunker: 15m3 -Production Capacity: 150-250 Tons Per Hour -Crusher Type: Cone Crusher -Maximum Feeding Size: 180mm -Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks -Total Motor Power: 197 kW MCC-200 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) Pgodpfx Aljz E Rg Tswst FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2008, operating hours: 36,103 h, load capacity: 185 kg, arm reach: 2,800 mm, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Based on the famous IRB 6600 series, with the flexible bending backwards concept, the very high wrist torque, the service friendly modular built up and the availability, significant for ABB’s robots, the IRB 6640 robot family goes even further. With focus on high production capacity, compact design and low weight, simple service and low maintenance cost. The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Podpfxowq Sfye Alwjgt Specifications Payload: 185 kg Arm Reach: 2800 mm Model Type: IRB6640 Controller: IRC5 Condition: Used & Tested Model Year: 2008 Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: ABB's Website)

Condition: new, functionality: fully functional, warranty duration: 6 months, KUKA Mastering Set The KUKA mastering set is required for mastering the robot axes during start-up or after maintenance. During mastering, the mechanical position and the electronic position of the robot are aligned. This complete kit can be used for almost all KUKA robots. Article No.: 00-228-862 ✔️ Condition: Brand New ✔️ Warranty: 6 Months The mastering kit must be checked and verified by KUKA at intervals of 1 year. For more details or quotation, please contact us. Pgsdpfx Asw U Ud Eelwet

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Psdpfx Aljhv U U Dowegt Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, GALEN ES1012 Electric Scissor Lift – European Dealers Wanted The GALEN ES1012 electric scissor lift is designed for safe, efficient, and reliable indoor and outdoor work at height. The machine is equipped with a German EQU control system, providing precise operation and dependable performance. Galen Group has been manufacturing scissor lifts and aerial work platforms for three years. As part of our expansion in the European market, we are looking for one reliable and experienced dealer in each country or selected region. We are interested in building long-term partnerships with companies active in: Pgsdjzzfd Ijpfx Alwet Aerial work platform sales and rental Construction and industrial equipment Material-handling machinery Access equipment service and maintenance Regional machinery distribution Our goal is to work closely with selected partners and develop the GALEN scissor-lift range in their local markets. If you are interested in becoming an official GALEN dealer or regional partner, please contact us for detailed technical information, pricing, commercial terms, and cooperation opportunities. Keywords: GALEN ES1012, electric scissor lift, mobile elevating work platform, MEWP, aerial work platform, manlift, access platform, electric platform, compact scissor lift, German EQU control system, scissor lift manufacturer, access equipment distributor, scissor lift dealer, European machinery dealer, dealer opportunity, regional distributor, rental equipment, industrial lifting platform, construction equipment, powered access equipment.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 3,000 mm, turning diameter: 700 mm, SMTCL CAK80285D CNC horizontal lathe, year of construction 2011, with original FANUC control. Offered for sale by the first owner. All maintenance has been carried out without exception; the machine is still in active, trouble-free production use. It has not been heavily used - a machine with plenty of life left. Bed ways and slide surfaces are clean and in very good condition. Technical data: Pjdpfx Aez An Ryelwjgt - Turning diameter over bed: 700 mm - Turning diameter over cross slide: 500 mm - Turning length / machining capacity: 3,000 mm (3 m) - Control: FANUC (original) Can be inspected under power in our workshop and is ready for immediate delivery.

Condition: new, Year of construction: 2026, The KL2000 machine combines welding, cleaning, and cutting into a single compact unit. It offers an energy-efficient, low-maintenance, ensuring high precision and fast operating speeds across various metal types. Technical Specifications: Laser Source: 2kW Laser Type: Fiber Laser (Raycus) Laser Wavelength: 1080 nm Adjustment of power: 10 - 100% Output Power Stability: < 3% Pgsdpfszmtmhjx Alwjt Central focus distance: 150mm Adjustable axial run-out (weld seam): 0.1 - 5 mm Laser Cooling System: Integrated water cooling chiller Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 - 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 8 m Machine Dimensions (L x W x H): 1,000 x 550 x 650 mm Weight: 210 kg CE Certification: Included

Condition: excellent (used), Year of construction: 2016, 538 USED Wachtel Compact rotary trolley oven. Oven for 60x80 or 58x78 baking trays. EXTERNAL DIMENSIONS (in cm): - W: 159 - L: 168 - H: 265 EQUIPMENT: - gas burner TECHNICAL DATA: - year of production: 2016 Pgedpfx Ajzz S H Aelwst The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 50,000 kg, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-110s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking trackes can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-110s Production Capacity: 130-240 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1100x1000 mm CSS Setting: 0-50 mm Total Power: 360 kva Vibrating Screen: 1500x2700 mm Weight: 50 tons Dimensions: 2900x3180x14760mm - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance Pgjdpfx Asz A Dldjlwjt – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2021, operating hours: 550 h, USED GUIDETTI SINCRO MILL 315 CABLE RECYCLING LINE – 2021 For sale: a used, compact cable recycling line manufactured by the renowned Italian company Guidetti Recycling Systems. The SINCRO MILL 315 is designed for processing mixed electrical cables, including both rigid and flexible copper or aluminum cables, without requiring preliminary sorting. Despite its compact design, the machine integrates the complete recycling process into a single system: * blade granulator, * zig-zag separator, * refining turbine, * dry density separation table. Rigid metal fractions, plugs, and connectors are separated directly by the zig-zag system, while plastics and thinner wires are further processed in the refining turbine. This solution improves separation quality and minimizes metal losses in the plastic fraction. The line produces clean copper or aluminum granulate and a separated plastic fraction. According to the manufacturer, the purity of the recovered materials can reach up to 99%, depending on the type and condition of the input cable. TECHNICAL DATA Manufacturer: Guidetti Recycling Systems Model: SINCRO 315 MILL Year of manufacture: 2021 Serial number: S315M210077 Operating hours: just over 550 hours Production capacity: approximately 130–180 kg/h, depending on the input material Installed power: 21 kW (according to the machine nameplate) Power supply: 400 V / 50 Hz / 3P+PE Full-load current: 37 A Dimensions: approximately 2316 × 1475 × 3100 mm Weight: 1,200 kg Psdjz D I Sdspfx Alwjgt CE marked: Yes MAIN ADVANTAGES * complete cable recycling process integrated into one compact machine, * suitable for mixed rigid and flexible cables, * processing of copper and aluminum cables, * no preliminary cable sorting required, * high-quality separation of metals and plastics, * low operating hours, * compact footprint, * relatively low energy consumption, * easy operation and maintenance, * Italian manufacture. CONDITION The machine is used and has only slightly more than 500 operating hours. It is offered as a complete, integrated cable recycling unit.

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. The associated heat-exchanger data plate identifies manufacture for Tetra Pak and service by Tetra Pak, with a 2012 year shown on the plate.Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and coolin... Pgsdpfx Asz Ecmxjlwjt

Condition: used, functionality: fully functional, mileage: 2,59,933 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. Pgjdpfx Aljz Ega Aswot MirrorCam Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 8 mm Rear left outer - 8 mm Rear right inner - 8 mm Rear right outer - 8 mm

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,600 kg, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, grinding belt width: 1,400 mm, workpiece width (max.): 1,350 mm, Heesemann HSM.3 multi-purpose surface grinding machine with crosshead unit, calibration unit, and DB-S unit. An all-rounder in a compact space. Calibrating, veneer and lacquer sanding, texturing, polishing, sanding fillers, edge rounding, ... - Automatic workpiece thickness measurement - Adjustable vacuum, integrated into the machine body - Height adjustment not via a chain drive, but via direct drive - Non-driven rollers at the infeed and outfeed (2 each) - Industrial PC 15.6", terminal on the front left - Program memory for up to 1000 programs - Feed rate 3 - 15 m/min - MMI package - Program for remote maintenance - Program for dust extraction flap control - Cross-sanding unit, 15 kW, stepless sanding belt speed, for veneer sanding (longitudinal and transverse), lacquer sanding, saw-rough effect, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Longitudinal sanding unit with pressure lamella belt and calibration function, 15 kW, stepless sanding belt speed, calibrating, fine sanding, and lacquer sanding, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Rotating disc brush unit DB-S, for fine sanding, lacquer sanding, edge rounding, sanding fillers, polishing, texturing - Uninterruptible power supply - Energy Management System EMS - Ionization bar from above - Workpiece extraction system with individually controllable, rotating compressed air nozzles, inside the machine frame, conveyor belt cleaning program - LED lighting in the machine - and much more Psdpoztafwsfx Alwogt The machine is available in our showroom for demonstrations. Inspections and trial runs can be arranged by appointment.

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated Psdpfev D Rg Djx Alwsgt brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 Psdoyzgxcopfx Alwsgt - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 12,668 h, load capacity: 5,000 kg, lifting height: 5,980 mm, free lift: 1,990 mm, fuel type: electric, mast type: triplex, construction height: 2,970 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, empty load weight: 11,770 kg, total length: 5,340 mm, drive type: Elektro, construction width: 2,530 mm, Electric Sideload Forklift Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 50 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Pneumatic Front Tyre Size: 3.00-15 Rear Tyre Type: Pneumatic Rear Tyre Size: 3.00-15 Battery Voltage: 80V Battery Capacity: 1250Ah Battery Year: 2024 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders available at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing and financing under attractive conditions are always available. We also buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EGX50/16/60TR model. P.S.: Our master forklift workshop specialises in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons and up. We are also happy to offer your vehicle on a consignment basis. Fork Positioner, Fork Positioner Opening Range: 560 / 1440 mm Heater, Full Cabin, Full Free Lift, Platform Height: 1020 mm Podpfx Alsz Evz Aswsgt

Condition: used, Year of construction: 2011, operating hours: 1,878 h, machine/vehicle number: TP124, Used Tetra Pak AB straw applicator 2011Technical Specifications & Performance DataThe Straw Applicator 30 is a dedicated packaging machine engineered to apply individual drinking straws onto carton packages with high accuracy and repeatability. Manufactured by Tetra Pak Packaging Solutions AB, this second hand unit is well suited for integration within beverage production and industrial packaging lines focused on carton handling. With low operating hours and CE compliance, it offers dependable performance for producers seeking to upgrade or expand a used bottling line or carton packaging operation.Manufacturer: Tetra Pak Packaging Solutions ABMachine type: Straw Applicator 30Model: 30Year of manufacture: 2011Production speed: up to 16,400 packs per hour (dependent on pack format and line speed)Container compatibility: Carton packagesSupported format: Tetra Classic Aseptic (tetrahedral)Primary function: Automated application of individual straws to preformed, filled, and wrapped cartonsOperating hours (hour meter): 1,878.6 hDrawing specification: 86335D-300CE marking: YesAdvanced Automation & Control SystemsThis machine employs a robust, PLC-based architecture with an HMI operator panel for recipe management, real-time status visualization, and streamlined diagnostics. Integrated sensors monitor straw presence and placement, while alarms and fault messages support rapid troubleshooting and reduced downtime. Quick-change parts enable efficient format adjustments, enhancing flexibility on mixed-format packaging lines.PLC-based control with HMI for set-up, recipes, and monitoringIntegrated sensors for straw presence and placement verificationAlarm and diagnostic functions for rapid fault resolutionQuick-change components for format changeoversCE-compliant guarding and interlocksProduction Line Integration CapabilitiesDesigned for inline operation, the Straw Applicator 30 synchronizes with upstream carton fillers and conveyors, as well as downstream bundling or case packing systems. Its control interfaces facilitate signal exchange for smooth product flow and coordinated speed control across the industrial packaging line.Inline integration with carton fillers and conveyor systemsInterface-ready for upstream/downstream signal exchangeFormat change flexibility for multiple carton sizes and straw typesSuitable for beverage production environments focused on carton packagingMachine Condition & Maintenance HistoryThis second hand unit presents as a low-hour machine with a clear operational profile. The hour meter indicates limited use, supporting extended service potential. Maintenance should follow OEM guidelines to sustain reliability and performance in continuous-duty applications common to beverage and industrial packaging operations.Operational status: Ready for operationLow operating hou... Pgodpfx Alez E Dk Sewet

Condition: used, Year of construction: 1998, operating hours: 26,000 h, machine/vehicle number: LC670, Tetra Pak TBA 19 V10 complete filling lineTechnical Specifications & Performance DataThe Tetra Pak Tetra Brik Aseptic is a used bottling line filling machine for aseptic carton packaging. Built approximately in 1998, this industrial packaging machine is configured for 125 ml Slim Brik containers. Its vertical packaging-web handling arrangement supports the forming, filling and sealing stages required for compact carton packs in dairy product production.Manufacturer: Tetra PakMachine identification: Tetra Brik AsepticApproximate year of manufacture: 1998Machine Hours: 26.000 HoursContainer type: Brik cartonFormat: 125 ml SlimProduct application: Dairy productsFilling technology: Aseptic carton fillingAdvanced Automation & Control SystemsThe machine is equipped with an operator control panel and an electrical/control cabinet for managing operating functions. Visible pneumatic lines, mechanical drive assemblies and adjustable mechanisms indicate an integrated automation layout for web transport, carton formation and package handling. Aseptic carton filling equipment of this type is designed to coordinate film registration, forming and sealing operations through a controlled production sequence.The machine includes accessible service areas, adjustment points and an elevated operator platform to support routine operation and format-related setup activities.Production Line Integration CapabilitiesThis Tetra Pak filling machine is suited to operation as the primary filling and forming unit within an aseptic carton packaging section for dairy products. It can be integrated with upstream product preparation and sterile product supply systems, as well as downstream carton conveyors, accumulation systems, coding equipment and secondary packaging machinery. The lower discharge and product-handling section supports transfer of filled Brik packs toward the next stage of the production line.Machine typeManufacturer / modelYearFilling MachineTetra Pak Tetra Brik Aseptic1998The 125 ml Slim configuration makes this second hand aseptic filling machine relevant for beverage production and dairy packaging operations requiring compact carton formats. Integration should be planned around compatible carton conveying, downstream packing equipment and the process utilities required by the wider aseptic packaging installation.Machine Condition & Maintenance HistoryThe machine is offered as used industrial packaging equipment and is classified as ready for operation. Its stainless-steel enclosure, access panels, service platform, guardrails, access ladder and adjustable leveling feet are visible. Buyers can assess the equipment within the context of t... Pgodpfx Asz E Dg Telwst

Condition: used, Year of construction: 2013, machine/vehicle number: ET255, Used FUJI 410 sleeve applicator labeling machine for PET 10000 BPHTechnical Specifications & Performance DataThe Fuji Seal 410 DT-STH-DHA is an automatic linear sleeve labeling machine designed for the application of sleeve labels to PET bottles. Built in 2013, this high-performance unit reaches a maximum output of 10,000 bottles per hour, supporting efficient label application in industrial packaging and beverage production environments.Manufacturer: Fuji SealModel: 410 DT-STH-DHAYear of construction: 2013Maximum speed: 10,000 bottles per hourMachine configuration: LinearContainer material: PETCurrent bottle format: 2.0LLabeling method: Sleeve applicationMaximum reel diameter: Ø 500 mmWorking table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for controlled and simplified operation. Its six-reel configuration and automatic reel changeover are designed to support continuity during production, reducing interruptions associated with reel replacement. Clockwise operating direction is specified for integration planning and conveyor layout.Siemens PLC control system6 label reelsAutomatic reel changeoverElectrical supply: 400V, 3 Ph+N+TElectrical rating: 16ACompressed-air pressure: 6 barProduction Line Integration CapabilitiesThis sleeve labeling machine can be positioned downstream of filling and capping equipment and upstream of secondary packaging machinery in a used bottling line. Its linear architecture is suitable for inline PET bottle handling and can be coordinated with conveyors, accumulation systems, inspection equipment, shrink wrappers, and palletizing equipment. The stated 2.0L format provides a defined basis for assessing bottle-handling components and change-part requirements.Automatic sleeve labeling is applicable to beverage production lines processing soft drinks, still water, sparkling water, milk, beer, wine, alcoholic beverages, oil, and preserved products. As with other industrial packaging machines, line synchronization should consider bottle stability, conveyor speeds, sleeve material, and downstream package requirements.Machine Condition & Maintenance HistoryThe machine is stated as ready for use, refurbished, and supplied with compatible spare parts. A 6-month warranty is indicated. This condition makes the unit suitable for operators seeking second hand bottling equipment intended for prompt integration into a production line. The machine is offered under an as-inspected sale condition.Operational Performance & VersatilityThe Fuji Seal sleeve labeling system is intended for accurate automatic application of sleeve labels on PET bottles. Sleeve labeling provides a versatile decoration solution for beverage production and industrial packaging, allowing bottle presentation to be adapted to product and brand requirements. The label magazine, six reel positions, and automatic changeover arrange... Pjdpoz E Dg Hefx Alwogt

Condition: used, Year of construction: 2016, machine/vehicle number: PST34, Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice / concentrate (non-dairy)Documentation: Full documentation and user manual includedAdvanced Automation & Control SystemsThe integrated touchscreen HMI provides intuitive operation, real-time process visualization, and streamlined recipe management for consistent pasteurization results. Automated control of temperature, product flow, and holding time supports stable performance and product safety. Alarm handling, trend logging, and guided operator prompts help ensure repeatable processes with minimal downtime. The system’s CIP-ready design allows automated cleaning sequences to be managed from the control interface for efficient changeovers and hygiene assurance.Production Line Integration CapabilitiesEngineered for seamless integration in beverage production environments, this flash pasteurizer connects upstream to blending, filtration, and storage tanks, and downstream to fillers and industrial packaging systems. The skid-mounted footprint simplifies placement and utilities hook-up, enabling fast commissioning within second hand or upgraded processing setups. Its continuous operation supports steady flows into downstream filling and labeling equipment, helping maintain overall line efficiency.Machine Condition & Maintenance HistoryThe unit has a documented non-dairy product history processing apple juice and concentrate, contributing to a clean internal condition profile. Supplied with full documentation and user manual to facilitate installation, operation, and maintenance. Presented as a second hand pasteurization system suitable for beverage production environments seeking dependable thermal treatment with compact installation.Operational Performance & VersatilityThe tube-in-tube configuration is well-suited for juices, concentrates, and similar non-dairy beverages where gentle handling and stable heat transfer are critical. The design supports rapid heat-up and controlled holding for effective microbial inactivation while preserving product quality attributes. The CIP-ready construction, sanitary connections, and stainless steel surfaces... Pgjdsz E Dhqjpfx Alwjt

Condition: used, Year of construction: 2012, operating hours: 17,600 h, machine/vehicle number: SO140, Used KOSME blower unit 6 cavity - 12000 BPHTechnical Specifications & Performance DataThis rotary blow molding machine by KOSME delivers reliable PET bottle production with a proven 6-cavity configuration. Optimized for beverage production and industrial packaging, it achieves a maximum output of 12,000 bottles per hour on the 0.5L format. An energy-saving ceramic oven and an additional air recovery system support efficient operation, reducing both power and compressed air consumption. The machine comes customized for 28 mm neck finishes, aligning with common beverage closures used in water and CSD packaging.Manufacturer: KOSMEYear: 2012Architecture: RotaryNo. of cavities: 6Maximum output: 12,000 bottles/hour (0.5L)Container type: PET bottlesNeck finish: 28 mm customizationHeating system: Energy-saving ceramic ovenAir system: Additional air recoveryElectrical: 400 V, 50 Hz, 27 kWOperating hours: 17,600 hoursAdvanced Automation & Control SystemsThe machine features a robust control panel for process set-up and monitoring, supporting stable heating profiles across the ceramic oven zones and precise blow parameters for consistent bottle quality. Recipe-based settings streamline format optimization while minimizing operator intervention. Safety guarding and interlocks protect operators during production and changeovers, and the system supports efficient warm-up and standby modes to reduce energy use during short stops.Production Line Integration CapabilitiesDesigned for seamless integration in a used bottling line or as a standalone stretch-blow module, this unit interfaces easily with standard preform handling systems and downstream PET filling, labeling, and secondary packaging machinery. It supports beverage production workflows where high efficiency and quick synchronization with conveyors and accumulation systems are required.Inline or standalone operationCompatible with standard preform handling equipment (elevator, tipper, unscrambler)Interfaces with PET fillers, labeling machines, shrink wrappers, and palletizersFormat noted: 0.5L; additional sizes can be configured with appropriate toolingMachine Condition & Maintenance HistoryThe machine is currently in production and reported in very good condition. It has approximately 17,600 operating hours and has recently undergone its scheduled 18,000-hour maintenance. Documentation is available to support commissioning, operation, and maintenance activities, ensuring a smooth start-up in a second hand or upgraded industrial packaging environment.Currently in productionVery good conditionRecent 18,000-hour maintenanceManuals availableOperational Performance & VersatilityWith a 6-cavity rotary platform and energy-saving ceramic oven, the machine offers stable production at 12,000 bph on 0.5L PET bottles. The additional air recovery system enhances efficiency by redu... Pgjdpfxjz E Dh Ro Alwet

Condition: used, functionality: fully functional, load capacity: 3,000 kg, empty load weight: 330 kg, Equipment clamp Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Riman model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease-to-own and financing options are available from us at favorable terms. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this PH100. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom design for forklifts from 8 tons and up. We would also be happy to offer your vehicle for sale on consignment at our location. Psdpfx Aez Evptelwegt

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 8,936 h, load capacity: 5,000 kg, lifting height: 6,280 mm, free lift: 2,050 mm, fuel type: diesel, mast type: triplex, construction height: 3,000 mm, fork carriage width: 1,520 mm, fork length: 1,400 mm, empty load weight: 10,500 kg, total length: 5,070 mm, drive type: Diesel, construction width: 2,200 mm, Side loader forklift Load center: 700 Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tire size: 3.00-15 Rear tires type: Superelastic Rear tire size: 3.00-15 Description: In addition to this Baumann model, we have about 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing & financing under favorable terms are always possible. We are also happy to purchase your used machine directly—even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly give you detailed advice on this DFQ50/14/63TR. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons and up. We are also happy to display your vehicle for consignment sale at our facility. Heater, full cabin, full free lift, Platform height: 1040 mm Pgedpjz Ewbkofx Alwot