Used Manometer for sale (193)

Condition: used, Year of construction: 2020, functionality: unexamined, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, total length: 3,800 mm, total width: 4,500 mm, total height: 6,400 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. Hnedpfxswlrv Uo Ahwek • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.

Condition: like new (used), machine/vehicle number: MV-300E/NC, functionality: fully functional, pressing force: 300 t, table width: 1,250 mm, table length: 1,250 mm, total length: 2,300 mm, total width: 1,800 mm, total height: 3,500 mm, overall weight: 18,000 kg, pressure: 320 bar, Equipment: documentation/manual, safety light barrier, The MV-300E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for deep drawing, punching, and deburring tasks. Power tn 300 Motor Power kW 18 Piston Stroke mm 750 Approach Speed mm/s 110 Variable Working Speed mm/s 5-15 Return Speed mm/s 130 Guide Diameter mm 150 Maximum Pressure Bar 320 Table Usable Area mm 1.250 x 1.250 Between Columns mm 1.250 x 940 Vertical Clearance mm 1.000 Total Frontal mm 2.300 Total Lateral mm 1.800 Total Height mm 3.500 Weight kg 18.000 STRUCTURE AND TABLES Consists of three electrowelded blocks made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. The bottom table has a 50 Tn hydraulic cushion with a useful surface of 950 x 750 mm and three front consoles to support the die outside the press.Incorporates a SIEMENS KP-700 COMFORT NC for the regulation of the top table stroke, speed changes, and cushion regulation. CYLINDER AND HYDRAULIC GROUP 2 single-acting cylinders with lapped sleeves, chromed pistons, and maintenance-free anti-wear guides. 2 auxiliary double-acting cylinders for fast approach and return speeds. Variable speed motorized hydraulic group. Includes cylinder decompression valve. Hnjdpfxewphhns Ahwek Silent hydraulic pump. All hydraulic presses of the M series include a pressure switch located on the side, allowing the most suitable pressure setting for each type of work to be regulated. Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY Incorporates a Siemens SIMATIC S7 1200 safety PLC and a 7” KTP-700 COMFORT touch screen located on the electrical panel. Allows programming of semi-automatic and automatic modes, power, stroke, and dwell time of the top cylinder and cushion. It has a storage capacity of 300 recipes, each recipe can program all the above values. Prepared for Industry 4.0. The electrical panel includes a selector that allows choosing the type of work to be performed in manual, semi-automatic, or automatic mode and a selector to choose operation in fast or slow speed. Electrical and hydraulic maneuvers are redundant and self-controlled. They incorporate an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of correct operation and safety distance for photocells. Operation is carried out by low voltage electric pedal. For safety, they incorporate category IV photoelectric barriers located in the front working area, two fixed side guards, and a practicable guard with a magnetic disconnection detector located at the rear.

Condition: like new (used), machine/vehicle number: MV-600E/NC, functionality: fully functional, pressing force: 600 t, operating speed: 5 mm/s, reverse speed: 18 mm/s, table width: 990 mm, table length: 890 mm, overall weight: 23,000 kg, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. Hnjdpfx Aowpggijhwek It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: like new (used), functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 400 t, operating speed: 3 mm/s, reverse speed: 18 mm/s, table width: 2,520 mm, table length: 6,000 mm, total length: 6,000 mm, total width: 3,650 mm, total height: 3,250 mm, overall weight: 28,500 kg, pressure: 319 bar, The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates. Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge. Power tn 400 Engine Power kW 11 Working Speed mm/s 3 Approach Speed mm/s 10 Return Speed mm/s 18 Maximum Pressure Bar 319 Piston Stroke mm 450 Lower Table mm 6.000 x 2.520 Front Clearance mm 2.560 Vertical Clearance mm 700 Head Displacement mm 1.900 Bridge Displacement mm 4.900 Working Height mm 800 Total Front mm 6.000 Total Side mm 3.650 Total Height mm 3.250 Weight mm 28.500 STRUCTURE AND TABLES • Features an electrowelded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Longitudinal bridge movement is achieved using a frequency inverter and toothed belt. • Lateral movement of the head is motorized and controlled via a frequency converter. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides. • Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling. • Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel. • Motorized hydraulic group with two speeds and automatic deactivation of high speed. • Includes a cylinder decompression valve. • Pressure regulator. Hedpfewpgmvex Ahwenk • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel includes a selector that allows choosing between manual or semi-automatic operation. • Also includes a selector for choosing high-speed approach or low-speed working. • Operation is carried out via a suspended control station with emergency stop and low-voltage operation. • Includes a maneuver confirmation button. • Includes a perimeter-mounted safety rope device.

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  Hnjdpoghbkysfx Ahwok With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Year of construction: 2005, condition: good (used), Stationary high pressure pump unit URACA KD716-G on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 100 bar Delivery rate: 263 l/min. Drive speed: 1.500 RPM Drive power: 46 kW with AEG 3~motor with URACA MSSV 32/150 safety and switching valve with control panel, manometer and pulsation damper. dimensions LxWxH: approx. 1900x1100x900 mm Weight: approx. 1.000 kg Year of manufacture: 2005 (MSSV valve year 2015) Condition: in good used condition. Hnedjm Uywlopfx Ahwjk

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing Hnodpfsddv Itox Ahwjk -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: Hjdex Nugdjpfx Ahwonk 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, Workshop press 100 tons with electric motor and additional manual operation Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 100 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 100 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- Hsdpfjf Sqcysx Ahwenk The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer in which we inform you about our general terms and conditions and the right of withdrawal.

Condition: new, Year of construction: 2022, machine/vehicle number: 20b015, Fully Automatic Printing Tower for Crate Printing on 4sides Electro pneumatically controlled fully-automatic screen printing machine for rotary printing, with microprocessor control, equipped with feed, printing and ejector station, pneumatic squeegee pressure adjustable via manometer, pneumatic squeegee switching, with squeegee quick clamping system, squeegee stroke, adjustable squeegee pressure. Printing movements individually adjustable when working in one-shift operation. All four sides of the crate will be printed at the same time in different colours and motivs. 800crates per hour enable a precise reproduction ability and a high productivity. Special hose pumps apply the ink onto the horizontal positioned screen frames. In that way each side of the crate gets an even ink application. Hedpfxeihccfj Ahwonk The screens can be exchanged within minutes which, in turn, reduces the holding time. The multi-functional system of the printing tower makes a change of both logo and ink possible within short time thus enabling short set-up times. A modern electronic control via display ensures the requested process control and helps analysing any faults. The step-by-step operation mode show the printing status during the automatic production run resp. during the set-up by the operator.

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition. Hjdpfx Aow N N Arehwonk

Condition: used, Auslauf NW 50 oben Hnedpexytwmjfx Ahwek Druck Manometer mit Auslauf Optional : div. Armaturen Anzahl verfügbar (Angebot pro Stk.): 11

Condition: new, mileage: 500 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, Mercedes Benz Arocs 5 3740B 8x4 EURO6 GSR with Stetter AM10 FHC Basic Line GSR – Turn Assist, Lane Departure Warning, Emergency Brake Assist, Reversing Camera, etc. First registration: unregistered Year of manufacture: 2025 Mileage: 500 km Colour: Arctic white Available in your desired colour for an additional charge *SEE PHOTO Technical Data * 290 kW * 394 hp * Front tires: 315/80R22.5 * Rear tires: 315/80R22.5 * Gross vehicle weight: 37,000 kg * Mileage: 500 km * Emission class: Euro 6E * Year of manufacture: 2025 * Transmission: automatic, Mercedes Benz Powershift 3 * Condition: new vehicle Chassis Equipment – M Cab Classic Space * Wheelbase: 5,150 mm * Engine: Euro 6E * Front axle: straight design, 8 t * Rear axle: planetary, 13.4 t * Fuel tank: 390 L aluminum and 25 L AdBlue * Sun visor * Air conditioning * Comfort cab suspension * Disc brakes, front and rear * ABS and ASR * Aluminum air tanks * Roof hatch * Comfort driver's seat with premium upholstery * Construction rear lamps * Cruise control * LED daytime running lights * LED fog lamps * Pre-installation for: toll system, roof-mounted headlamps and rotating beacons * Multimedia Cockpit, interactive with navigation system * FMS Fleet Management System interface * Reversing camera * Refrigerator * Lane Keep Assist * Attention Assist Hnjdpfswuxwqjx Ahwek * Traffic Sign Assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist Body Equipment * Stetter AM 10 FHC * Nominal volume: 10 m³ ready-mix concrete * PMP gearbox * 650 L compressed air water tank * Smooth aluminum rear axle mudguards * Folding underrun protection * Manual mixer controls * Emergency stop switch * 2 plastic chute extensions with holder and protective brackets * Water meter * 750 mm steel fold-out section * LED work lights * Mudguard extensions * 5 m concrete flow pipe adapter * Consistency manometer Non-binding offer, ex works Cologne. Subject to prior sale and errors. Sale to businesses only. We speak German - We speak English -

Condition: new, pressing force: 30 t, stroke length: 400 mm, working width: 720 mm, - Capacity 30 tons - Cylinder stroke 400 mm - Working width 720 mm Hnedpfjr Axznox Ahwjk - Electrically or manually operated - Manometer - Emergency stop - 400V

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket Hsdpfexttc Aox Ahwenk * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm Hnedpfeftmxvjx Ahwsk * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm Hnodpfxjmhm Aqo Ahwok cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: new, cutting diameter 315 mm Hnjdjwfyq Topfx Ahwsk dimensions of saw-band 3460 x 1,1 x 34 mm cutting speed 35 / 70 m/min cutting width 400 x 250 mm 250 / 280 mm Impact energy 220 / 280 mm 180 mm 140 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling