Used Humidifier for sale (44)

Condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, control, air humidification, dehumidification and evaporative cooling -Module: M4 (large display) -for: Condair CP2 Bedpfx Abjd Tq Rxocjlc -Type: M4 -Weight: 0.3 kg

Condition: used, Humidifier, Humidifir, Humidificateur, Hymidificador -Handover: in its current condition as inspected -Control unit: does not switch -Rated output: 13 kg/h -Operating voltage: 380 V Blodjb Uf N Aopfx Abcec -Power requirement: 9.8 kW -Quantity: 1 piece available -Dimensions: 360/530/H995 mm -Weight: 38 kg

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier baseboard, Steam generator board Blodpfspvqycjx Abcec -Manufacturer: Hygromatik, base board for steam humidifiers -Type: MT2 B-2522492 -Dimensions: 170/115/H85 mm -Weight: 0.7 kg

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board -Manufacturer: Hygromatik, MP humidifier control display -Type: MP E-2522450 -Dimensions: 155/50/H95 mm Blsdepxq Ukjpfx Abcec -Weight: 0.3 kg

Condition: excellent (used), Here we offer you Defensor steam humidifier. Defensor Mk5 Resistance Steam Humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifier is built according to the current state of the art and the recognized safety regulations. Nevertheless, in the event of improper use of the Defensor Mk5 steam humidifier, hazards may arise for the user and/or third parties, and/or or material assets may be damaged. To ensure safe, proper and economical operation of the Defensor Mk5 steam humidifier, please observe and comply with all the information and safety instructions contained in these Bsdpfx Abonyh T Decelc installation and operating instructions. Defensor Mk5 type series Visual For indirect or direct room humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 max. steam capacity in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 unit A: 40 kg/h unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit 4x8 kw heating wire 32kW 160 ° C max Bsdpfjfl Iquex Abcjlc

Condition: good (used), Type AG-1 Voltage 380 V (50 Hz) Number of revolutions 3000 r/min Water output 12 ltr/h Engine power 0.55 kW Transport dimensions 650x650x400 mm Bjdpfx Abeq Tn Rvecolc Weight 14 kg Price 250 Eur (EXW Jonava, Lithuania)

Condition: used, Humidifier for ventilation construction - Klingenburg A total of 4 pieces are available. The price is per piece! Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Bledpfstzxtvex Abcjc Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: excellent (used), Carel HeaterSteam UR020HL10S isothermal steam humidifier The Carel HeaterSteam UR020HL10S is an isothermal steam humidifier. It produces steam by heating heating elements immersed in a steam cylinder filled with water. This can be regular tap water or fully demineralized water. The heat generated by the heating elements heats the water to a temperature of 100°C. Technical specifications: Dimensions: (L x W x H): 690 x 438 x 887 mm Weight: 63 kg Steam output: 20 kg/h Power: 15 kW Power supply: 400 V/3 Steam pressure: 0...3600 Pa Steam connection: 40 mm Water supply connection: 3/4" G male Steam distribution For optimal humidifier performance, the produced steam must be distributed evenly throughout the room to avoid droplet formation and condensate accumulation. This can be achieved either with vented steam distributors or steam lances. The choice of steam distributor depends on the room into which the steam is to be introduced. For direct room humidification (in rooms, factory halls, etc.), vented steam distributors (optional) with a motorized fan should be used. However, if steam is to be distributed via ducts or air handling units, Steam lances are used, which utilize the speed of the air flowing through them for humidification. You can find more items – new and used – in our shop! International shipping costs on request! Bedpfou Eb A Njx Abcjlc

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, overall weight: 128 kg, ambient temperature (max.): 46 °C, pressure (max.): 13 bar, MACHINE DETAILS Bedpfsydnyxex Abcolc Weight: 128 kg Max. air pressure: 13 bar Max. ambient temperature: 46 °C

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 900 W, with electronic defrosting, for continuous operation. Very quiet operation. Dehumidification capacity max. 50 l/24 h, air volume max. 265 m3/h. Electronic control unit with illuminated large control panel and memory function. Electronic hygrostat. Air filter. Internal 7.7 l condensate container. In sturdy plastic housing with castors. In cardboard box. Dehumidification capacity: ≤ 50 l/24 h Air volume: ≤ 265 m³/h Bjdpfxotty Ras Abcslc

Condition: new, Electric dehumidifier/construction dryer for commercial use. For drying rooms, dehumidifying cellars, etc. and for drying e.g. concrete, masonry, plaster, screed. Refrigeration unit with rotary piston compressor and capacitor motor 230 V, 50 Hz, 1200 W, with automatic hot gas defrosting system, for continuous operation. Very quiet operation. Dehumidification capacity max. 80 l/24 h, air volume max. 850 m3/h. Electronic control unit with illuminated 3"" display and memory function. Electronic hygrostat, operating hours counter, power consumption counter. Air filter. In a sturdy sheet steel housing on a mobile tubular steel frame with large wheels. In cardboard box. Condensate container not included (see accessories below!) Dehumidification capacity: ≤ 80l/24h Air volume: ≤ 850 m³/h Blsdpfxeuy Thme Abcjc Super offer: When you buy a REMS Secco 80 set, you will receive 1 REMS Detect W humidity measuring device free of charge. You save an additional 233.55 euros. The offer is valid until 31.12.2024

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Bsdpfx Aox Eifkjbcslc Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. Bledpfokw Ukuex Abcjc •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Year of construction: 2021, condition: like new (used), For sale Food Dryer - Dehumidifier. Used a few times. Blodpfx Aboibwb Tscsc Max. indoor temperature: 60 degrees Celsius. Flow rate: 4500 m3/h Shell for products: 25 psc. Power required: 220V 50Hz More parameters in photos. If you have an questions on this, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Air dryer AGRE KOMPRESSOREN ADD 3000 (18) – 13 bar | 11.18 kW | 2012. I will sell an industrial air dryer AGRE KOMPRESSOREN ADD 3000 (18), manufactured in 2012. The device is an ideal solution for compressed air systems, ensuring effective moisture removal and improvement of air quality in pneumatic installations. Technical data: ✅ Model: ADD 3000 (18) ✅ Manufacturer: AGRE KOMPRESSOREN GmbH (Austria) ✅ Year of manufacture: 2012 ✅ Weight: 550 kg ✅ Power: 11.18 kW ✅ Voltage: 400 V / 50 Hz / 3 phases ✅ Working pressure: 13 bar ✅ Maximum pressure: 13 bar ✅ Maximum inlet temperature: 55°C ✅ Maximum ambient temperature: 45°C ✅ Refrigerant: R404A (10.5 kg) ✅ Country of manufacture: Italy Condition and use: The dryer is in good technical condition, ready to work. Bledpfx Abjv Dr I Ajcjc

Year of construction: 2014, condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 30 Blodpei Atudjfx Abcsc CAPACITY 3 M3/MIN, YEAR OF PRODUCTION 2014 THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: excellent (used), Year of construction: 2015, Refrigeration dryer BOGE DS 95 Capacity 9.5 m3/min year of manufacture 2015, THE DEHUMIDIFIER IS FULLY FUNCTIONAL. Blodpfxsk Nb T Do Abcoc

Year of construction: 2018, condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 24 OUTPUT 2.4 M3/MIN, YEAR OF PRODUCTION 2018 Blodpfx Abei Att Sscjc THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: ES50202201047, type of input current: AC, overall weight: 36 kg, input voltage: 240 V, type of cooling: air, input frequency: 50 Hz, noise level: 52 dB, Equipment: compressor, Mobile dehumidifier for enclosed spaces. Water tank capacity 5.5 liters, refrigerant R290 (propane). Minimum room size 12 m² (floor area). Maximum room size 80 m² (floor area). Shipping is possible. Bledpfjw Ecqpsx Abcoc

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Steam Cylinder -Manufacturer: HygroMatik, steam cylinder for steam humidifiers/steam generators -Type: unfortunately without type designation -Accessories: including 6x electrics / 1x sensor electrics installed, see photos -Quantity: 2x containers available Bodpfx Ajpb Ea Eobcslc -Price per piece -Dimensions Ø 372 x 660 mm -Weight: 7.6 kg

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Bjdpfjudvg Rsx Abcjlc Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) Blodpjw Thykjfx Abcsc (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar Bljdpfx Aoxnyqvebcsc - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Bjdsw Hz Tropfx Abcelc Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.