Used Manual Devices for sale (24,088)

Condition: used, Year of construction: 2008, Drill chuck: Two-jaw chuck Speeds: 2800 rpm Drilling stroke: 200 mm Max. drilling depth: 180 mm Operation: Single-hand Indexing drilling device: Yes Pitch of indexing drilling: 16-22-25-32 mm Gedpjzzq Rgefx Akaskb Activation of height adjustment: manual Reading of height adjustment: Scale Clamping cylinder: 2 pcs Clamping cylinder activation: Hand eccentric Design: Traversing drill head Drill head swiveling: Yes Table width: 630 mm Table depth: 285 mm Weight approx.: 240 kg Motor power: 2.2 kW Extraction diameter: 80 mm Storage location:

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 18 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,500 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5,000 rpm, total length: 7,250 mm, total width: 4,460 mm, total height: 1,770 mm, overall weight: 923 kg, table height: 900 mm, Equipment: documentation/manual, saw blade guard, scorer, • Electronically programmable circular panel saw for professional woodworking, combining the highest precision and user-friendliness. • Sliding table with aluminum roller table and hardened precision guides for consistently accurate cuts. • Flexibility: Manual, semi-automatic, and fully automatic operation possible. • Rip fence carriage with CompeX device, anodized aluminum profile with guide made of hardened, ground, and dovetailed steel guides. • Scoring unit with independent motorization, adjustable from the outside, and stops for easy saw blade positioning. • “SCM Thundercut” optimizer/sequencing control app for tablets. Gedpfx Aezvd T Dskaokb • Electronic 2-axis control: Vertical adjustment and tilting of the saw unit. • Eccentric clamping device. • Electronic display of the parallel fence position.

Condition: used, Year of construction: 1999, Year: 1999 Condition: functional Gksdsy Rqd Uopfx Akasb Technical specification: - Maximum sheet format: 1120 × 780 mm - Minimum sheet format: 400 × 400 mm - Layer height: 40 to 165 mm - Maximum stack height: 1300 mm - Load capacity: 200 kg - Operating air pressure: 6–8 bar - Electrical power consumption: 1.2 kVA POLAR Mohr Transomat TR 130 EL-4 The POLAR Mohr Transomat TR 130 EL-4 is an automatic unloading and stacking device designed for operation with high-speed paper cutting machines manufactured by POLAR Mohr. The unit automatically removes cut paper layers from the unloading table of the cutter and places them onto a pallet. This reduces manual handling, shortens auxiliary operating time, and improves the continuity and productivity of the cutting process. Operating principle After completion of the cutting cycle, the cut layer is transferred into the working area of the unit. The handling mechanism grips the layer, transports it, and places it accurately onto the pallet. The system includes a movable pallet tip which helps maintain precise alignment of the stack.

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swivelled away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swivelled away for machine setup and then easily locked into place. Dust extraction nozzle 2 x 120mm. Gsdozbm Tfjpfx Akajkb Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20 h, functionality: fully functional, 2010 RYOBI 752P (Wide) Two-Color Reversible Printing Press Reversible Printing: 1+1 / 2+0 Maximum Sheet Size: 600 x 788 mm Maximum Speed: 15,000 Sheets Per Hour Paper Thickness: 0.04 – 0.6 mm Only 20 Million Impressions! Year: 2010 Equipped with: PCS-G Printing Control System Ryobimatic Dampening System Technotrans Alpha.d Refrigeration Unit IVS Ink Volume Setter Suction-Tape Feeder Table Semi-Automatic Plate Changer Automatic Roller Washer Automatic Blanket Washer Automatic Impression Cylinder Washer Automated Reversible Printing Unit Changeover Gjdpfx Akozxp Sqeajkb Sheet De-Curler Steel Plate in Feeder and Delivery Grafix Digital 3000 Powder Spray Device High-Pile Delivery Cylinders are Damage-Free Rubber Rollers in Very Good Condition Spare Parts List & Manual Machine Tools

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min Gedpfx Ajcp Nvyokaekb -Speed: max. 150 mm/min -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Gkedpfx Aexuh Ddokaob

Condition: ready for operation (used), functionality: fully functional, Vertical band saw / MÖSSNER REKORD SM 420 - Roller diameter approx. 420 mm - Overhang approx. 410 mm - Workpiece height max. 265 mm - Work table size 600x600 mm - Band welding device - Band grinding device - Work light - Swiveling work table - Total power approx. 1.7 kW Dimensions: L x W x H 0.8 x 0.9 x 1.9 meters / Weight approx. 550 kg Gkodjzy E S Aepfx Akaeb Errors and omissions excepted - Operating manual

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 1,11,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm Gkjdpfxoy Sfx No Akajb x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52335, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 6,000 kg, controller model: Heidenhain TNC 155, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gsdpfx Ajzz Rmnekaokb Travel range, X-axis: 3,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Table load capacity: 6 t MACHINE DETAILS Control system: Heidenhain TNC 155 Apparent power: 45 kVA Phases: 3 Voltage: 380 V Frequency: 50 Hz Current: 85 A EQUIPMENT Manual swivel head, 0.1°

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing boards and planks and features stepless feed and cutting depth control. Gkodpezxrtqsfx Akasb Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Stepless feed Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm length × 600 mm diameter Equipment: Resawing device for cutting boards and planks programmable cutting depth control ELGO Electric Type 87P pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm heavy-duty industrial design Condition and scope of supply as shown in the photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site, but would be available shortly! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Subject to errors, prior sale and changes. All information without guarantee.

Year of construction: 1996, condition: used, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW Gsdped Dzliofx Akaekb -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Condition: used, Year of construction: 1994, Machine length: 2800 mm Length stop: Fixed, 90° Duplex cutting system Cutting width: 1300 mm with manual adjustment Gkjdpfx Akozh Hwcsaeb 7.5 kW No pre-scoring device Location: Nattheim

Condition: like new (used), Year of construction: 2013, For sale is a Leadwell lathe LTC-25 iM -Control Siemens Sinumerik 828D -Operating hours approx. 1000h "rather less" -connected load approx. 23 KW weight approx. 6.7t -Turning diameter max. 310mm turning length 1,000 rpm range 35-3,500 rpm -Bar passage D 77mm -VDI drum turret (VDI 40 with driven tools) -Speed ​​range 3000 rpm, number of tools 12 pieces -Tool measurement via Renishow probe manually stretchable -Programmable tailstock with M functions/ additional foot switch for quill movement -Coolant system 4 bar -Adjustable clamping pressure of the chuck -Hainbuch quick-change system, centroteX/ capteX on collet small/collet large/jaw chuck D250mm Various collets "see pictures" can also be purchased -Preparation for attachment of a bar feeder -Preparation for collecting device for workpieces -Set-up dimensions approx. 5000 mm x 2300 mm x 2000 mm -Hinged belt chip conveyor -Training documents and machine documents as well as other documents from attachments are available. Godpfx Akjh Aw Rkeajkb -Machine is under power and is still in use -Delivery time Immediately -Many tool holders, turning tools, drills and tables can be purchased at an additional cost. see pictures

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Godozlg Agjpfx Akaekb Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg Gedjyuy Euopfx Akaokb

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg Gedpfx Akox Eb Ansaokb - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Condition: used, Year of construction: 2010, USED HERMLE C 40 UP MACHINING CENTER Year of manufacture: 2010 Control: HEIDENHAIN iTNC 530 Travel: X 850 mm, Y 700 mm, Z 500 mm Linear axes (X-Y-Z) – Dynamic version Spindle speed: 18,000 rpm Spindle taper: HSK - A63 Tool magazine with 38 positions NC rotary table with tilting function, dia. 800 mm for PALLET CHANGING C-axis with torque motor, A-axis with tandem drive includes pallet clamping system, hydraulic and pneumatic expansion, table washing system, cabin door with automatic opening/closing (Capacity 1,400 Kg) Pallet changing device PW 800 for SRT 800 PW - 630 x 630 Capacity: 800 Kg Rotary loading/unloading station for PW 800 Gsdpfx Aozy Rqdjkaokb Additional control for operating the clamping system for PW 800 Internal coolant supply at 80 bar, including: Paper filter, Standard coolant system, Pressurization of optical scales, table washing system Chip conveyor Air blow cleaning device Cabin cover with manual opening/closing Polycarbonate safety glass HEIDENHAIN thermal compensation Electronic handwheel Renishaw measuring probe incl. preparation Laser system - Blum Chip washing gun Signal lamp No. 2 pallets 630x630 Additional articulated arm

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW Gksdjrx S Ipepfx Akasb - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector Gsdpfxszlivps Akaokb

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460065, Technical specifications: # Machining Workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotational table axis (A) and 2 rotational axes (B) with indexer head - Direct angular measuring system, maximum rotational speed: 50 min⁻¹, accuracy: +/- 5" # Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum workpiece weight: 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle taper: DIN69893-HSK-A63 (internal coolant supply) # Automatic tool changer: 2x32 tools, chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / max. length 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring device: Heidenhain linear scales # Chip conveyor/extractor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max 80 bar: Knoll 550 K-1 450_2450 (can service 2 machines simultaneously) # Shaft cooling system, guideways, and control cabinet # 2 oil lubrication units # Oil vapor absorption/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire protection: Kraft & Bauer # Part presence detection: with low-pressure air sensors Gedexw Ttiopfx Akaokb # In-process control: Marposs T25 # Tool breakage monitoring and length measurement: inductive sensor # Toolholder detection system in working spindle # Documentation: Manuals only (printed) Machine condition: Operational / In working condition.

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table Gksdequ Sc Hspfx Akaeb 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Year of construction: 2002, condition: repair required (used), ULMA, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out the tray. • Gravity and motorized exit conveyors: inline, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centring device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high-performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethene and polyolefines. TECHNICAL FEATURES (Depend on the model) • 1 or 2 film rolls with automatic roll selection. • Automatic recognition of the tray dimensions or manual. • Automatic or manual selection of film length and width. • Universal elevator. • Self-diagnostic capability. • Film tension control. • Forward and reserve jog capability. Gsdpfxjg H Tqus Akajkb • 4-way film stretch with lateral pre-stretch. • Temperature control for the sealing belt. • Oversize package detector. • Mechanical torque limiter. • Guards and safety devices according to international standards. • Heavy duty construction with corrosion-resistant material. Power supply: 380 V, 12 kW Bizerba GV labeller, manufactured in 2002 Bizerba 18A scale with Bizerba AB display. Automatic labelling and weighing system for products packaged in the food area. Electric power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Compressed air supply of the blower label: air pressure: 6 bar, air flow: min. 100 l / min, compressed air. without oil, filtered at 10 µm, Label dimensions: 100x100. The separation between labels: from 2 to 20 mm. Thermal print head - resolution of 8.0 points Weighing from 1gr to 6000gr. Maximum labelling capacity 60 packages/minute. Equipment prepared for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment was reviewed, rebuilt, and guaranteed with the following maintenance: change of conveyor belts, thermal print head, and engine belts. High-quality equipment and great performance in terms of speed and reliability. The label and the scale are mounted on an output conveyor belt. Weighs at least 40 g up to a maximum of 18 kg For the Romanian companies, there is the possibility of selling in instalments. Price upon request, FCA: Oradea/Romania We sell this line refurbished Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. Gkodpfotuuvzox Akaob - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine Gkjdpfx Akjvkgvheaeb No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition