Used Manual Panel Saw for sale (25,218)

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Hnedpjg Dgr Hofx Agwji • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Hjdeiz A Amjpfx Agwoni Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm Hnjdpfx Agehvan Iswsi cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, functionality: fully functional, Package consisting of three machines: 1. Striebig vertical panel saw, year of manufacture 1977 Hedpfx Agjyrf Icowsni 2. Rapid table saw PK 100, year of manufacture 1989 3. Chip extraction system With the Striebig panel saw, right-angled horizontal cuts up to 5300 mm in length and vertical cuts up to 2200 mm in height can be made. Bevel and mitre cuts are not possible. The Rapid table saw is equipped with a sliding table and is exceptionally stable and precise. The machines are sold only as a package. Collection only.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Hjdpfsyngt Sex Agwoni Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Hnedpfx Aew I U D Ejgwsi Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: Short-term Location: Flörsheim

Condition: ready for operation (used), A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible. Hnedpfx Asyq R E Regwoi

Condition: used, machine/vehicle number: 007486, Max. panel width: 2100 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm Hjdpot Sn Azsfx Agwoni

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor Hodpfxjx Hbrus Agwsni - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used BIESSE Selco WN2 saw - OSI control - label printer - Year 2017 Hnjdpfx Asyrr U Negwji - available April - saw height 60 mm - 1–80 m/min - quick-change saw blade - 4 air cushion tables

Condition: excellent (used), Year of construction: 1999, Technical data: • Model: 215-RSXL Hnjdpfx Agjymx Urjwji • Cutting length: 4150 mm • Cutting height: 2150 mm • Maximum cutting depth: 80 mm • Maximum saw blade diameter: 300 mm • Motor power: 3 kW • Speed: 4200 rpm • Feed rate: 10 or 20 m/min • Return speed: 20 m/min • Operating pressure: 6 bar

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 3,200 mm, total length: 6,667 mm, total width: 5,916 mm, overall weight: 5,000 kg, Equipment: CE marking, scorer, We offer a horizontal panel dividing saw Selco EB90 Machine data Brand: Selco Model: EB90 Description: Horizontal panel saw Cutting length: 3,200 mm Hodoyrngzepfx Agwsni Maximum panel width: 3,200 mm Saw blade projection: 85 mm Clamping grippers: 6 Connection: 15kW, 3Ph, 50 Hz, 380V AC Weight approx.: 5,000 kg Year: 1999 3 rounded air cushion tables as support Software: Optiplanning Brochure can be provided upon request The machine is in impeccable condition (still in operation). Video can be provided upon request. Machine as seen, without dismantling and freight.

Condition: good (used), Code: 0295 Brand: PUTSCH MENICONI Model: SVP 620 - CE Standard Manual vertical panel saw - CE Standard Cutting lenght mm 4200 Cutting height mm 2200 Cutting depth mm 45 Hnjdpeyiumiofx Agwoi Motor power Hp 3 Blade diameter mm 250 Device for cutting of short pieces Overall dimensions: Mounted machine mm 5400 x 1500 x 2950 h Weight kg 900

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Hodpfx Agohvm Diswsni Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes

Condition: used, machine/vehicle number: 005255, Max. panel width: 4300 mm Max. panel length: 2200 mm Hsdpfxsg E Tcxj Agwsni Main saw blade projection: 110 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Hnjdpfx Asw Uz Spjgwei Vacuum sheet loading: yes

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Hjdpfx Agswuz Dyowjni Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 75 mm No of Grippers: 7 Hedpfew Idh Hex Agwsni

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Hnjdpju N Slijfx Agwji Main saw blade projection: 75 mm No of Grippers: 7

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Hnjdpfx Aju Rv Uqsgwsi Panel Rotation Station: yes

Condition: excellent (used), Year of construction: 2009, Machine Data: Panhans S 45 All in One Year of manufacture: 2009 Cutting length: 4200 mm Cutting width (programmable pusher travel): 4200 mm Angle stop on the left Hnjdpfjyhnmgox Agwei Roller tracks: 9 pieces, first 3 are dual-lane Clamping grippers: 8 pieces Air cushion tables: 4 pieces Central blower: 1 unit Technical Data: Saw blade protrusion: 70 mm, at 45°: 50 mm Saw carriage feed rate: forward 1-120 m/min, reverse constant 120 m/min Programmable pusher speed: forward 0-80 m/min, reverse 100 m/min Automatic cutting height adjustment; pressure bar height control Angle alignment device: min. alignment width 0 mm; max. alignment width full cutting length Main saw motor: 14 kW, main saw 350 mm diameter Scoring saw motor: 1.5 kW, saw 180 mm diameter Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load: 20 kW Total weight: 6200 kg Control: VISIOLINE with PIOS Professional V2.0.0.x Labelling package incl. label printer

Condition: excellent (used), Year of construction: 1999, power: 4.4 kW (5.98 HP), input voltage: 400 V, input current: 10 A, saw blade diameter: 300 mm, rotational speed (max.): 4,750 rpm, rotational speed (min.): 4,750 rpm, Manufacturer: Striebig Standard III TRK 6220 A Year of manufacture: 08.99 Height adjustment: Digital Feed: Manual Design: Automatically retracting wooden support Saw carriage unit: Manual Plunge saw unit: Manual Swivel adjustment 0/90 degrees: Manual Motor power: 4.4 kW Hnodpfx Ageynagxswsi Cutting range: 5300x2200x80 mm Saw blade speed: 4750 rpm Saw blade diameter: Nominal 300 mm Condition: Very good If you have any questions or require more information, please send us a message or call us.

Condition: used, machine/vehicle number: 005552, Max. panel width: 2200 mm Max. panel length: 4300 mm Hnodpfem Tnbwex Agwoi Main saw blade projection: 125 mm No of Grippers: 10

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Hjdpfoiiiuyox Agwjni Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 007470, Max. panel width: 3800 mm Max. panel length: 2200 mm Main saw blade projection: 130 mm Hnjdpfst H Twaox Agwji No of Grippers: 7