Used Manual Panel Saw for sale (27,680)

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area 4,200 x 2,100 x 50 mm - CE mark - Rear full enclosure - Scoring unit - Complete with extraction hood and saw blade - Control panel on saw carriage - Reinforced 4 kW motor - With strip cutting device - Folding stops and aluminium central support - Retractable slatted frame for horizontal cuts Dljdpjwt E Uysfx Addsa Dimensions: approx. 5,250 x 2,700 x 1,350 mm Weight: approx. 750 kg Availability: short notice Location: Hesse

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 542798, cutting length (max.): 4,200 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 355 mm, cutting height (max.): 80 mm, main saw diameter: 355 mm, total length: 6,470 mm, total width: 6,450 mm, overall weight: 5,300 kg, saw drive: 9,000 W, input frequency: 50 Hz, input voltage: 400 V, power: 10.1 kW (13.73 HP), air pressure: 8 bar, saw blade bore: 30 mm, year of last overhaul: 2013, Equipment: scorer, Very well-preserved MAYER PS 9 Z panel saw, upgraded in 2013 (new PC, new PLC, new software, new control panel) Panel Saw Model PS9Z ECO - 4200 - Feed speed continuously adjustable from 5 - 70 m/min, return 80 m/min. - Dust channel for connection to extraction system - Pressure beam with central suction pipe - Automatic cutting length adjustment via sensor technology - Saw carriage runs on hardened and ground round guides. The drive is via rack and pinion (no chain), ensuring uniform feed and enabling high travel speeds. - Quick-release device for main and scoring saw - Saw hood interlock and louvered safety guard on the pressure beam - Recesses for package clamp in the pressure beam to enable complete cutting of panels without offcuts - Automatic cutting height adjustment (2 stages) - Swiveling control panel Dljdoxy Rwqspfx Addsa - Completely enclosed machine, especially in the pressure beam area - Transparent louvered safety guard allows operator to view the cutting line - Turret stop on the saw carriage The machine is dust-tested and bears the GS mark (No. 951061) as well as the CE mark (No. 951062) Saw motor: 9 kW Saw blade: 355 mm Cutting height: 80 mm Saw blade projection: 105 mm Cutting length: 4,200 mm Voltage: 400 V / 50 Hz Scoring unit - Scoring unit with pneumatic lowering during return, scoring motor 1.1 kW, for 127 mm scoring blade, convex. Left angular table 2000 x 600 air cushion - Air cushion angular table, on the left facing forward 2000 mm long, 600 mm wide, with 2000 mm long angle stop rail Auxiliary table 2000 x 600 air cushion - 3 auxiliary air cushion tables facing forward, size 2000 x 600 mm Material pusher travel distance 4200 mm - Double-guided material pusher, driven by rack and pinion and AC servomotor, forward speed 25 m/min, return 60 m/min - Separate measuring system via precision measuring racks and rotary encoder, rear support table with 11 twin roller tracks - Cutting length: 4,200 mm - Travel distance: 4,200 mm Package clamp opening height 80 mm - Package clamp on the material pusher (opening height 80 mm) with double-fingered design Pressing device 20 - 1200, automatic - Lateral pressing device operates automatically - For workpieces from 20 to 1200 mm - Manual presetting to workpiece width required automatic edging device - Device for automatic approach to the edging position by the material pusher Electronic control and PLC updated to PC6200 in 2013: - New PC - New software - New PLC - New control panel Machine is operational and can be inspected/tested at any time. A forklift is available for loading.

Condition: used, functionality: fully functional, Panel saw Djdew U T D Ropfx Addjla sliding carriage 3000 mm scorer tilting saw blade

Condition: used, No. 3248 Horizontal panel saw HOLZMA Optimat HPP 380/38/38 Used, year of construction 2003 Machine still in operation, expected to be available from 19.01.2026 Djdpfx Aexrglnoddjla Cutting length 3800 mm Cutting width 3700 mm Saw blade projection 95 mm Main saw motor 13.5 kW Scoring saw motor 2.2 kW Main saw blade 380 x 4.8 x 60 mm Scoring saw blade 180 x 4.8 - 5.8 x 45 mm 7 clamps 3 air cushion tables, of which 1 with angle stop 3 roller elements on front side LKT Operating software Schnitt Profi(t) 9.0 / CADmatic V3.0 15" monitor (replaced in January 2025) V program pusher up to 80 m/min V saw carriage up to 130 m/min Machine dimensions 7205 x 6100 mm LW Sale on behalf of customer, ex location near 90471 Nuremberg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2007, Selco EB70L Beam Saw Cutting length 4300 mm Cutting width 4400 mm Dedpfxsx A Eyro Addola Max. saw blade protection 70 mm Saw blade diameter 300 mm

Condition: ready for operation (used), Year of construction: 2011, cutting height (max.): 1,510 mm, cutting depth: 55 mm, type of input current: three-phase, input voltage: 400 V, saw blade bore: 30 mm, main saw diameter: 250 mm, rotational speed (min.): 5,100 rpm, We are selling our vertical panel saw from manufacturer Elcon, model DS 155, due to a new purchase. The machine features an extended cutting length of approximately 4 meters. It is still in operation at the moment, but a prompt handover is possible. We will assist you with loading and dismantling. Dodpfxexxrt Ro Addjla

Condition: used, Year of construction: 2006, cutting length (max.): 3,200 mm, saw blade diameter: 650 mm, cutting height (max.): 200 mm, cutting width (max.): 3,200 mm, saw drive: 35,000 W, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, compressed air connection: 6 bar, sheet thickness aluminum (max.): 200 mm, space requirement length: 6,855 mm, space requirement width: 6,280 mm, space requirement height: 2,400 mm, working height: 1,100 mm, Mayer AL 160 Panel beam saw for aluminum and non-ferrous metals with a maximum package height of 200 mm. Technical data: Year of manufacture: 2006 Cutting length: 3,200 mm Cutting width: 3,200 mm Maximum package height: 200 mm Maximum material clamp opening: 210 mm Saw motor power: 35 kW Saw blade diameter: 650 mm Saw unit forward speed: 0.2 - 60 m/min. Saw unit reverse speed: 60 m/min. Material pusher forward speed: 10 m/min. Material pusher reverse speed: 20 m/min. Extraction connections: 1 x Ø 140 mm, 1x Ø 160 mm Pneumatic operating pressure: min. 5 bar, max. 6 bar Pneumatic compressed air requirement: 720 Nl/min. Working height: 1,100 mm Overall height: 2,400 mm Installation length: approx. 6,855 mm Installation width: approx. 6,280 mm Dledoxx Anlspfx Addea Condition: The machine is largely functional and is currently in use in production.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Panel saw Homag HPL 300 Year of production: 2016 Technical data: * Cutting width: 3800 mm * Rear loading with rotation group and side loading * Labelling unit * Touchscreen Dedsxzu E Ispfx Addola * 3 front tables 600 × 2000 mm with air cushion * 8 grippers

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Dodexvz T Ijpfx Addola Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Dsdpfxoxranpj Addola Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts Dlsdpow Nac Aefx Addsa PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 2,500 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 40 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, trimming length: 2,500 mm, – Austrian manufacture – Year of manufacture: 2008 – Saw blade guard – With scoring unit TECHNICAL SPECIFICATIONS: – Sliding table length: 2500 mm – Max. main blade diameter (without scorer): 315 mm Dedpfx Adexm Rm Sedsla – Max. main blade diameter (with scorer): 250 mm – Blade bore diameter: 30 mm – Max. cutting height with 250 mm blade: 40 mm – Spindle lock – Main blade adjustable up/down and tiltable – Blade guard – Incl. sliding table – Cutting width at rip fence: 1300 mm – Main motor: 4 kW – Fence with ratchet: 1700 mm – Scoring unit – Max. scorer blade diameter: 80 mm – Scorer spindle diameter: 20 mm – Scoring motor: 0.65 kW – Extraction port diameter: 50, 100 mm – Transport dimensions (L/W/H): 250 / 170 / 110 cm – Weight: 454 kg

Condition: excellent (used), Year of construction: 2003, operating hours: 12,608 h, functionality: fully functional, machine/vehicle number: 0-241-06-5232, cutting length (max.): 4,300 mm, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026. Dlsdpfx Ajxfvp Asddsa

Condition: excellent (used), Year of construction: 2007, Available soon. Dledpfxjxugdve Addea Sample photo.

Condition: used, functionality: limited functionality, Hello, Dlsdpfx Adexuwpvodja I am selling two Striebig panel saws. Both machines are operational, with one being less calibrated than the other—I do not recall which one. The reason for sale is due to relocating the factory and clearing out the current machinery inventory. With some basic servicing, these saws will serve reliably for many years—those familiar with the brand know this well. I am selling both together, ideally to someone who will resell them and earn a profit. I am looking for a quick sale as they are taking up space. The listed price is net and for both saws.

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 8 kW (10.88 HP), Equipment: motor brake, For sale: SAC panel saw Specifications: - Model: Prestige - Electric height and tilt adjustment with digital readout - CNC-controlled parallel fence - 7.5KW (10HP) main saw - 0.5KW scoring saw - 320cm sliding table - Braked motor - CE mark - Original manuals included Dsdpsxx T E Usfx Addjla - Includes multiple riving knives - Year of manufacture: 2010 - Voltage: 400V Trade-in and delivery possible Location: Burdaard, Netherlands

Year of construction: 2005, condition: good (used), Vertical Panel saw GMC KGS 4SE year 2006 manufacture GMC Italy S/N 20361 in good condition technical specification: max lenght of cut 4000mm max height of cut 2200mm max height of horizontal cut 1900mm max thickness 50mm Dledpsi Dau Aefx Addoa saw Unit 3,0 kW ( 5200 rpm ) max saw blade 250mm Net weight 500 Kg Overall dimensions: Lenght 4900mm height 2700mm depth 1340mm

Condition: used, Martin type T70 panel saw for edging and sizing wood and other panel materials. Dledpsxqfghefx Addea Sled length: 2.500 mm cutting height: about 100 mm

Year of construction: 2010, condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Dedpfx Adei Evbzodela Cutting size 3300x3200mm. Cutting height 67mm. Max saw blade diameters 320 + 160mm Main motor 7,5kW Scoring motor 1,3kW Total power 10kW Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Software Ottimo Perfect Cut included. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Panel saw Giben Prismatic 2 SPT H.100 with rear loading Dedjxyq I Nepfx Addjla Year of production: 2003 Technical condition: very good Technical details: 4500 mm wide rear loading panel saws with 7 panel feed clamps, side lay-down, 4 air cushion tables of 1300x500 mm and one of 2000x500 mm. Cutting height 100 mm

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Dljdpfx Adew I Uxpsdoa Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Extraction: Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Control Functions Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...

Condition: good (used), Year of construction: 1999, Cutting area approx. 4300 x 2100 mm manual feed automatic retractable grid Cutting depth 40 mm Motor 3 kW Dedpfxexp Uyus Addjla Saw blade diameter 220 mm TRK extraction Further technical data on request All information provided without guarantee

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic Dsdpswnrf Uefx Addsla - New exhibition machine -

Year of construction: 2003, condition: like new (used), I sell the vertical saw with scoring GMC KGS400E, year 2003, condition like new. Cutting range 4500x2100mm Motor 3kW. Cutting head tilting 0-90° Main saw blade 240-250mm / 5200rpm. With scoring unit 104-110 x 20mm / 7000rpm. Manual cutting. Condition like new. Dledpfx Adohfhcxodja Total weight 665kg. Available immediately.

Year of construction: 2010, condition: excellent (used), I sell the automatic vertical saw without scoring knives HOLZ-HER Supercut. Cutting range 5300x2200mm Motor 3,0kW. Dlodpfxjpl Svcj Addja Cutting head tilting 0-90° Main saw blade 240-250mm / 2850rpm. Condition very good. Available immediately.