Used Manual Panel Saw for sale (27,670)

Condition: new, functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and high cutting heights with rapid feed rates – this is only possible with an uncompromisingly stable gantry construction. This level of uncompromising stability is achieved by using a proven tubular steel framework. The thick-walled steel tubes are meticulously welded into a complex support frame by our experienced staff, requiring many hours of dedicated craftsmanship. This creates the solid foundation for the high-precision guide rails, along which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 mm The machine allows the processing of workpieces up to 3200 mm in length and width. This means the saw carriage can execute cuts up to 3200 mm long. The material pusher can also be adjusted up to 3200 mm to the cutting line. Automatic cutting height adjustment up to 118 mm Dodpfx Adewfdiyjdjla The powerful motor drives the saw blade through material at cutting heights up to 118 mm. For optimal cutting geometry, the blade should project about 10 mm above the workpiece. This optimizes energy consumption, noise emissions, and blade service life—a significant advantage for users. Every machine is therefore equipped as standard with automatic cutting height adjustment. The machine scans the height of the material and automatically sets the saw blade to the correct cutting height. Even when cutting multiple sheets in a stack, the saw blade drive must remain powerful. That’s why we equip our saw with a robust 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height, expanding production possibilities and ensuring precise grooves. Adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP), 3x400 V / 50 Hz Optional equipment: - 14: Infinitely variable speed control, 2000–5000 rpm - 95: Pneumatic pressure device, 50–2100 mm - 24: Dust extraction pack on saw carriage for processing gypsum- and cement-bonded materials - 30: Air-cushion table, 2300 x 600 mm (2 units) - 28: Movable machine tables on linear guides and rollers - 40: Number of double-finger pack clamps, opening height 105 mm - 41: Additional double-finger pack clamp, opening height 105 mm - 38: Automatic trimming via laser measurement - 45: Additional double roller conveyor for sagging workpieces - 44: 24" touchscreen control unit - 90: Network connection preparation - 86: Control cabinet in special position - 700: Ardis module 1 - 710: Ardis module 2 - 714: Post-processor - 720: Ardis module 3 - 400: Helical rack for smoother operation - 401A: Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min - 403: Cut length selection via switch - 404: Double pressure beam SL 3200 - 437: Technology database including controlled pressure regulation for pressure beam and pack clamps - 92: Transport preparation for crane unloading Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: used, functionality: fully functional, – robust construction TECHNICAL SPECIFICATIONS: – max. cutting width: 3050 mm Djdpfx Adsw Nau Ssdsla – min. cutting width: 450 mm – max. cutting height: 125 mm – saw blade diameter – three cutting units – each cutting unit adjustable independently: 500 mm – motor power: 3 x 4 kW – feed motor power: 1.5 kW – two feed speeds – material hold-down – loading magazine for boards – transport dimensions (L/W/H): 620 / 200 / 120 cm – weight: ~ 800 kg

Condition: good (used), Year of construction: 2019, Rear-loading panel saw with panel turntable Dljdpfev Aiaaex Addja

Condition: good (used), Year of construction: 1986, functionality: fully functional, Technical data: Manufacturer : Striebig Type : Standard 6220A year 86 Feed : manual Saw carriage lock : manual Saw unit immersion : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 Kw Cutting area : 5550 × 2200 × 80 mm Speed : 2880 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 6400×2900×1600 Condition : good Mounting : Wall mounting Price : 3990 net A forklift is available for loading Dlsdpfx Aet D Hhaoddoa The machine works well, test run of course possible.

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° Dsdpfx Adst Ah Nijdsla No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Dlodpfstk It Ssx Addja Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: as good as new (ex-display), functionality: fully functional, saw blade diameter: 300 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, input voltage: 400 V, input frequency: 50 Hz, saw blade bore: 30 mm, rotational speed (max.): 4,800 rpm, overall weight: 1,200 kg, power: 5.52 kW (7.51 HP), Further technical data Cutting height vertical: 2240 mm Cutting height horizontal: 2100 mm Compressed air connection: 6-10 bar Dljdpexazflefx Addsa The CONTROL defines the premium class in vertical saw technology through a high degree of automation in the sawing process and innovative equipment options. The intelligent visualization on the clearly structured 12" touchscreen controller guides you safely through each step of the cutting process. With its logically structured user interface, you control the CONTROL easily and conveniently via a 12" touchscreen. Thanks to the standard EPS-Y, you can position the saw unit automatically for horizontal cuts. The also standard ABO ensures fully automatic upper trimming cuts. With this option, the lower trimming cuts are also performed automatically. Rotating the panel material and the associated heavy manual labor are no longer necessary. Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: used, functionality: fully functional, - After technical inspection - Condition: very good - Saw for longitudinal cutting, trimming, and shortening of wood or boards. Dsdpfx Asw Iqfxeddela TECHNICAL SPECIFICATIONS: - Saw blade diameter: 400 mm - Cutting height: 80 mm - Min. cutting width between 1st and 2nd saw: 700 mm - Max. cutting width between 1st and 3rd saw: 1900 mm - Cutting width between 2nd and 3rd saw: 1200 mm - Carriage length: 1500 mm - Main motor: 2 x 4 kW - Saw blade height adjustment - Outlet diameter: 2 x 100 mm - Dimensions (L/W/H): 300 x 130 x 110 cm - Weight: ~ 700 kg

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 17P810781240000, CIRCULAR PANEL SAW, TILTABLE BLADE, model UNICA 400, GRIGGIO - Italy Technical specifications: - Carriage dimensions: 385×3,200 mm - Blade tilting range: 0 - 46º - Maximum main saw blade diameter: 400 mm - Maximum cutting height: 130 mm - Cutting height at 45º: 90 mm - Height of the main blade above the table when fully lowered: 25 mm - Saw unit tilting range: 0 - 46º - Maximum rip capacity between blade and fence: 1,250 mm - Two extraction ports, diameter: 80 - 120 mm - Main motor power: 10 HP (7.5 kW) - Main saw speed (3 steps): 3,000 / 4,000 / 5,000 rpm Dljdpfx Ajw Tkgmjddja - Separate, externally adjustable scoring unit - Maximum scoring blade diameter: 125 mm - Scoring motor power: 0.75 HP - Scoring motor speed: 8,000 rpm - Rip fence with micrometric adjustment - Net weight (standard machine): 860 kg Machine equipped with: - CE conformity - Scoring unit with independently driven motor; manual adjustment on 2 axes; operational status indication via LED on worktable - Aluminium sliding carriage running on high-precision steel guideways - Carriage can be locked in any position - Carriage with anodised profiles - Very easy changeover of main blade rotational speeds - Rip fence with micrometric adjustment - Fence positioning on movable carriage with automatic height compensation depending on tilt angle - Quick selection of 5 cut sizes using extendable fence - Electric rise/fall for main blade - Saw unit tilting by handwheel - Gravity indicator for angle adjustment - Automatic star-delta starter - Upgraded 10 HP motor Excellent condition, supplied with a set of blades Operating hours: 300 h EXW price: 9,000 EUR net, excluding VAT

Condition: excellent (used), Year of construction: 1993, Technical data: Manufacturer : Striebig Year : 9.93 Type : Standard ll Plus 5220A Feed : manual Dlsdpfx Ajiwlz Asddsa Version : automatically deflecting aluminum slatted frame Saw carriage lock : manual Immersion saw unit : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 kW Cutting area : 4600 × 2200× 60 mm Speed : 5250 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 5700×3000×1400 Condition : very good Location : Warehouse Saw blade : 1 pc Can be loaded on site with forklift. Delivery and assembly possible by arrangement.

Condition: new, Year of construction: 2025, New Machine Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Dlsdpfxjw Tfxws Addea Availability: Short-term Location: Flörsheim

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Dlodpfswuz Irjx Addja Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP

Condition: used, Year of construction: 2010, functionality: fully functional, Complete Automatic System Beam Saw Giben Prisma 3000 , Cutting 3800 + Systraplan , Professional Stacking and destacking System , Complete line , 24m * 10 m , Dsdev H Ufvopfx Addola 2 places for loadin palets by forklift , Capacity about 20-25 palet places , * 5 palets in one place, about 100 pallets , Speed 120m/min longitudinal , 80 m/min * short side , Load capacity of the vacuum system 500 kg , More pictures and videos avilable ,

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) Dsdpfxjxhg Ibe Addsla - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: ready for operation (used), functionality: fully functional, Panel saw, saw-milling machine TRIUMPH T3000 Specification: • Condition - used, serviced • Manufacturer - TRIUMPH • Model - T3000 • Sliding table length: 320 cm • Scoring saw with separate motor • Main saw motor - 4.0 kW • Milling spindle motor - 4.0 kW • Scoring saw motor - 0.7 kW • Milling spindle diameter: 35 mm • Main saw spindle diameter: 35 mm • Variable speed adjustment on the milling spindle (via belt) • Manual lifting and lowering of the saw blade • Extraction ports: 120 mm • Weight approx. 900 kg Dodpfx Adow Snbxedsla • Transport dimensions: 330 x 120 x 110 cm (L x W x H) Additional information: • Good, original technical condition • Photos show the actual state of the item for sale • Possibility to power on and inspect the machine on site

Condition: good (used), functionality: fully functional, saw blade bore: 30 mm, main saw diameter: 303 mm, overall weight: 800 kg, empty load weight: 800 kg, workpiece height (max.): 2,790 mm, power: 4.4 kW (5.98 HP), working height: 2,200 mm, Technical data: Manufacturer : Striebig Type : Standard 6220A Feed : manual Saw carriage lock : manual Saw unit immersion : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 Kw Cutting area : 5550 × 2200 × 80 mm Speed : 2880 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 6400×2900×1600 Condition : good Mounting : Wall mounting Dodpfot D Hcdjx Addola Price : 3990 net A forklift is available for loading The machine works well, test run of course possible.

Condition: used, Used Machine Used Holz-Her Type 1211 Vertical Panel Saw Older model; only suitable for rough rip cutting MNo.: 360726 Technical Specifications: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Max. saw blade diameter 300 mm Motor power 4 kW Dedpjwka Ngofx Addola Availability: Short term Location: Röllbach

Condition: not inspected (used), Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 13189, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm Dledpfx Aou R Ulhoddea - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: new, Year of construction: 2025, Brand new vertical panel saw for manual cutting of sheet materials. All easily machinable materials such as solid wood panels, laminated wood panels, formwork panels, and all wood-based materials such as MDF, fiberboard, and particleboard can be cut and divided by sawing. Maximum cutting area: 4,200 mm x height 2,200 mm Maximum horizontal cutting height: 2,070 mm Manual saw unit rotation Maximum panel thickness that can be cut: 60 mm Saw motor drive power: 4.5 kW Saw blade diameter: 250 mm Compressed air requirement: 7 to 8 bar Dimensions approx. 5,300 mm x 1,500 mm x H 2,690 mm Weight approx. 700 kg Djdpsxc T T Tjfx Addola Optional equipment available: scoring unit, angle cutting device, chip extraction system, etc.

Condition: used, Year of construction: 1991, cutting length: 4300mm Dodpfew H Iqdox Addela cutting height: 2100mm cutting depht: 80mm scoring unit: nein feed: manuell read out horicontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm movable material support: ja Sawblade speed: ca. 4000 U/min motor power: 4 kW machine length: 6500mm machine depth: 1500mm machine height: 2800 mm weight: 800kg

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Manufacturer: HolzHer Model: 1205 Dljdpjxiwvlofx Addsa Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Saw blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal saw cuts: -via scale from 0 - 2,070 mm -via strip cutting stop from 75 - 500 mm Measurement readout for vertical saw cuts: -via scale from 0 - 1,300 mm Extraction ports: 1 x 100 mm, 1 x 120 mm Dlodew I U D Eepfx Addja Features: -ADVANCE clamping system, consisting of 2 pneumatic clamping tongs that can be motor-driven up and down on vertical axes with a ball screw spindle. The clamps support panels up to 150 kg. -Torsion-resistant, free-standing machine frame -Round bar guides, vertical and horizontal -Pneumatically retractable slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via handwheel -Strip cutting stop -Manual programming rail with 5 T-slots -Pneumatic plunge for the saw unit -25 material support rollers -1 infeed and 1 outfeed roller -Pneumatic workpiece clamping device between support rollers -3 center support elements, pneumatically extendable -Pneumatic saw head lock -Operator panel with document holder -Control unit on saw assembly: start button, stop button -Tool cabinet -Scale illumination for vertical saw cuts Partnership Edition features: -Digital display for folding stop -Digital display for saw unit with incremental function -Pneumatically tiltable saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment, and activation indicator -5.5 kW motor including star-delta starter -Cutting line laser Availability: short-term Location: Hochheim

Condition: used, Year of construction: 1999, cutting length: 5300mm cutting height: 2100mm cutting depht: 80mm scoring unit: no feed: manuell read out horicontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm Dsdpfxev R U I Sj Addsla movable material support: ja Sawblade speed: ca. 4000 U/min motor power: 4 kW machine length: 6500mm machine depth: 1500mm machine height: 2800 mm weight: 800kg

Condition: used, Year of construction: 1996, sawing length: 5300mm sawing height: 2100mm cutting depth: 60mm scoring unit: no feed: manuell read out horizontal cut: Scala read out vertical cut: Scala Dledpeuix Eyefx Addoa sawblade diameter: 300mm evasive workpiece support: ja speed sawblade: ca. 4000 U/min motor power: 3 kW machine length: 6500mm machine width: 1500mm machine height: 3000 mm weight: 800kg

Condition: new, Year of construction: 2025, Cutting length: 4100mm Cutting height: 2200mm Cutting depth: 60mm Scorer: yes Feed: manual Dledpfx Ajhpma Neddja Display horizontal cut: digital Display vertical cut: digital Saw blade diameter: 300mm Evasive material support: yes Saw blade speed: approx. 4000 rpm Engine power: 4 kW Machine length: 5300mm Machine depth: 1800mm Machine height: 3100mm Weight: 800kg