Used Manual Polishing Machine for sale (71,225)

Condition: new, bending length: 2050sheet thickness: 1.8upper roll diameter: 95sheet length: 2050 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  Nljdpfx Asd Ab Tujqvob - Digital readout for displaying position of the backroll - Body cover EURO 432,-- - Hardened rolls EURO 940,-- - variable speed of roation  We have many references!

Condition: new, bending length: 1550sheet thickness: 2.5upper roll diameter: 90 Technical specifications: - Cast iron body Nledod Ab Twopfx Aqvjb - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 362,-- - Hardened rolls EURO 650,-- - variable speed of rotation  We have many references!

Condition: new, bending length: 1250sheet thickness: 3upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily Nljdsd Ab Tyspfx Aqvob - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 314,-- - Hardened rolls EURO 550,-- - Variable speed of rotation  We have many references!

Condition: new, sheet length: 1275sheet thickness: 1,5weight approx.: 0,225messurements (LxWxH): 1,5x0,8x1,2 Nledpfx Asd Eqqvsqvsb

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working STANDARD - Brake Motor Option EURO 150,-- Neded Eqqzepfx Aqvolb                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, bending length: 1050sheet thickness: 1.8upper roll diameter: 70 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Nlsdpfx Aed Ab T Rsqvsb Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 274,-- - Hardened rolls EURO 392,-- - Variable speed of Rotation We have many references!

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450 Nleded Eqqwjpfx Aqvob         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, sheet length: 1050sheet thickness: 1,0weight approx.: 0,185messurements (LxWxH): 1,4x0,7x1,12 Nljdpfxsd Eqrpo Aqvjb

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Nodpfx Aei Ezq Dsqvjlb Weight : Kg 179

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Nsdpfxofibfgs Aqvslb Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Nodsyrr Uvjpfx Aqvelb Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles 3 lower bevelling spindles automatic lubrication 2 roller tables of 2mt. each Very good condition

Condition: new, functionality: fully functional, Manual equipment to cut the corners of the box blanks and make V & U-shape grooves. Ideal for mock-up samples and short runs. Corner sizes: max. 150 x 150 mm Cardboard sizes: max. 700 x 700 mm (box) max. 1000 x 700mm (cardboard cover) Cardboard thickness: min. 1 mm – max. 4 mm Tools: Nr.1 for “V” shape groove from 80° to 100° Nr.1 for “V” shape groove from 100° to 130° Nr.1 for “U” shape groove from 6 mm to 8 mm (optional) Nlsdpfsw Ad N Uex Aqvob Wheelbase: no limit

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, Exhibition machine: ACETI ART.70 Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 Njdpei Hp Nrsfx Aqvjlb The machine is in our test room in Kobenz. Machine is new and has not run! GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm - Circumferential speed: 22 - 44 m/sec Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter)

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Nedpfxsm Nbube Aqvolb

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm Nedelccvmjpfx Aqvelb The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: good (used), Year of construction: 2001, Guillotine Boschert EL300 AMADA tool system tool station D diameter 88.9 mm New tool adapter A / B / C station Nedpfxsdnny Re Aqvslb Punching power: 280 kN (28 tons) Punching arm RADIUS 350 mm Side stop 500 mm right/left Depth gauge with digital display Page attacks new, Weight 2300 kg

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest Nlsdpfxoh S Uirs Aqveb -Adjustment of the upper beam by hand lever left/right

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping Nodpofifbbefx Aqvolb High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Nodpfofifa Ajx Aqvjlb Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: good (used), 990 USED manual dough roller. Nsdpfx Ajw Hhpgoqvelb EXTERNAL DIMENSIONS (in cm.): - H: 120 (folded: 210), - W: 280 (folded: 155), - L: 121, - left wing: 135/66 - right wing: 131/65 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2025, 134 NEW Rondo Dough Roller - Tabletop Dough Roller TECHNICAL DATA: - Foldable stainless steel arms, - Roller opening 0.3 – 30 mm, - Motorized conveyor belts, - Roller diameter 84 mm, - Easy-to-read scale with dough thickness switch, - Roller length 500 mm, - Scrapers can be removed without any tools, - Outfeed belt speed 50 cm/sec, - Separate start and stop buttons. Dimensions (in operation): 1560 x 965 x 500 mm, - Safety guards. Dimensions (in standby): 810 x 965 x 710 mm, - Finger guards. Power: 0.75 kVA, - Easy-to-clean cotton belts, Nlodpfx Aexbdy Isqvsb - Flour container, - Power supply: 3 x 200 – 460 V. 50/60 Hz, - Weight: 80 kg, EXTERNAL DIMENSIONS (in cm) - Length: 156, - Width: 96.5, - Height: 50. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, functionality: fully functional, 1 used grinding and polishing machine Manufacturer: ATM Model: Saphir 320 Year of manufacture: 2003 Nljdpfx Aexuq I Ssqvsb Technical specifications: 320 Series - Single wheel Plate/disc diameter: 200 mm Speed: 600 rpm Voltage: 220 V / 60 Hz, 1 phase Weight: 24.5 kg

Condition: new, Year of construction: 2025, max. working width 300 mm number of brushing / polishing units 2 st. Nsdpfxjv Ucilo Aqvelb Feed speed 10 m/min. Max. diameter of brush / polishing rollers 190 mm motor power per brush / polishing roller 4,65 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1240x950x1650 mm Weight 435 kg Nljdpfx Aqjv A Hdcovob Total power requirement 4,65 kw

Year of construction: 2026, condition: new, Semi-manual operating Suitable for adhesive labels Label width: 20-165 mm Label length: 20-200 mm Cylindrical bottle shape only 600 bottle or jars/hourú Nlodpfxsfir Ucs Aqveb Dimensions: 530x420x300 mm