Used Manual Polishing Machine for sale (73,749)

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Bjdpfeya H Nksx Adloww Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Bwedpfx Adozuxn Telow Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Bwodpfx Aozg D I Ajdlow NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Bwodpfx Aoxftqdjdlsw

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in Bwedpfx Aeznwu Sedlsw live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Bwedpfxjzb Ipzs Adlew 1750 mm between centres Coolant pump and tank

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls* Bsdod Eqqwepfx Adleww         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Year of construction: 2022, condition: new, We are selling the gummy-making machine because we no longer use it. The machine has never been used and has been stored in our production facility for all these years. You can view it at our warehouse. Bodpfoz Rzknox Adljww If you are interested, please contact me.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Bodezav D Dspfx Adleww Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- Bwsdjd Eqqzjpfx Adljw - Double Speed Working STANDARD - Brake Motor Option EURO 150,--                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: new, Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450 Technical specifications: - Steel frame - Two bottom rolls are powered - Direct drive power system with gears - Top roll is idle ( free turning ) - Hardened rolls - Rolls shafts are special steel material hardened and ground - Double speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Bwsdpfxsd Eqq Ae Adlow Options: - digital display EURO 858, -- Angular side guide rollers EURO 1,287, -- Double speed STANDARD Brake motor EURO 150, --                                                                                                                                                                                                                                                                                                                                                                                                                PK 30 file TypeSizeMin. DiaNotes150x10        20x61800        300Standard Rolls280x15        30x6700        400Standard Rolls330x30        10x10900        200Standard Rolls4Ø 30        Ø 10900        200Optional Rolls5Ø 60x1,5        Ø 25x1,51000        600Optional Rolls61 1/2”x2,9        1/4”x1,8600        300Optional Rolls750x30x3        40x20x21200        800Optional Rolls840x3        30x21200        800Optional Rolls940x40x5        30x30x4600        300Optional Rolls1035x35x5        30x30x4600        400Optional Rolls1150x6        20x3600        400Standard Rolls1250x6        20x3600        400Standard Rolls1350x6        20x3600        400Standard Rolls         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment        •Capacities are given for 260 N/mm² plate yielding strength       

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package Bwsdpszt Ni Esfx Adlsw A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Bwodpfxehv U Txe Adlow Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need fior additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. Bwodpfsq Nf S Rjx Adlow 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Year of construction: 2023, condition: new, Cut to length machines FORSTNER COMPACT functions: Bwodpsiy N I Iofx Adlow - straightening (rolls diameters 70 mm) - slitting (max 7 slitting knives) - cutting (guillotine or roller shear) Available coil width - 1250 or 1500 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Bodeg Ev T Eopfx Adljww Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: excellent (used), Filling machine, TM Industry Belgium, Model M 25 For filling liquids Filling range: 0.5 - 30 kg In very good condition, directly from production!!! Bwedpfxsiu H Uvj Adljw

Condition: new, Year of construction: 2021, Layout: Round bale grab Empty weight: 7.500 kg Attachment suited for: Lifting equipment Capacity: 32 M.T. Bedpfx Aepa Rmkjdloww Jaw Aperture(min-max): 160mm/2400mm Jaw Teeth Length: 200mm Open/Close Time: ~7,5 sec Axial Rotation Time: ~30 sec Axial Rotation Time: 270° Weight: 7500kg Crane Hook Type: DIN 15401 No:40 hook Ambient Temperature: 45 ºC Max. Coil Temperature: 1100 ºC Energy Supply Voltage: 400 VAC, 3 Faz, 50 Hz

Condition: used, Perfectly working grinding machine "станка 3Л722" Basic parameters Accuracy class A Bwjdsqwzt Nopfx Adlow Maximum workpiece dimensions (length x width x height) 1250 x 400 x 400 Maximum dimensions on electromagnet 1250 x 400 x 280 Minimum dimensions on electromagnet 50 x 40 x 3 Distance from the spindle axis to the table mirror mm 210..625 Maximum product weight kg 600 Maximum weight on electromagnet 400 Machine work table Dimensions of table work surface (length x width) 1000 x 400 Table feed speed 3..35 Grinding head Dimensions of grinding wheel ПП450х80х203 Grinding wheel speed/min 1460 Maximum grinding speed m/s 34.4 Maximum diametrical feed, mm 430 Accelerated transverse disc feed m/min 1,2 Automatic cross feed for each table feed mm/rev 1..60 Maximum vertical disc feed, mm 415 ?? 0,002 ?? 0,2 Automatic vertical disc advance, mm 0,002..0,128 Vertical accelerated advance speed, m/min 0,2 Electrical equipment Number of motors 13 Disc spindle motor power, kW 11 Hydrostatic pump motor power 4 Hydrostation air heat exchanger motor power 0,09 Lubrication system pump power 0,25 If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Bwjdpew Hxiwjfx Adljw Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: new, Screen Bucket for 20-25tons Excavators Galen screen bucket is a versatile and efficient attachment designed specifically for infrastructure and construction projects. It allows on-site material sorting, reducing the need for additional transport and processing equipment Bwjdpsw Dayrjfx Adljw

Condition: new, functionality: fully functional, Year of construction: 2027, pipe diameter (max.): 38 mm, bending angle (max.): 190 °, bending radius (max.): 220 mm, total length: 4,250 mm, power: 19 kW (25.83 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, drive type: Servo - Hydraulic, operating speed: 147 mm/s, pressure: 150 bar, wall thickness: 2 mm, working length: 3,600 mm, Equipment: documentation/manual, 38x2mm Fully Automatic Cnc Tube Bending Machine The "Griffin" tube bending machines are hybrid structures. This type of tube benders includes hydraulic and pneumatic for clamping operations. Bending, feeding, rotation, stack changer and tube aligment operations working with servo engine. Flexible bending and working capacity with CNC control system. The capacity to adjust molds in 3 different radius scales Ability to automatically convert 3D technical drawings to bending program Multivariable roll bending system Ability to work with or without a mandrel Bwsdpovurm Hofx Adljw Automatic oil cooling system With linear guideway systems minimize the system gaps in moving parts Program changing feature while in the bending process ETU bending simulation program, for bending process, helps to make 3d tube bending arising from the coordinates, with excellent results. With DcOnTool tool, you can convert X, Y, Z coordinates to bending program (Y,B,C) Can review the last error messages with Dlog Its user-friendly, easy, knowledgeable and quick-to-learn design allows you to start the project quickly. Easy to use with 17 inch computer. The vibration-free structure shall help your work. Unlimited program saving and changing Turkish – English and French language 10 years sending spare parts

Condition: new, Year of construction: 2023, construction height: 22,000 mm, Explore Galen Group's range of high-quality long reach boom-arms, designed to enhance operational efficiency and safety in challenging construction environments. Bjdpfjq E Iw Rex Adljww The machine details on the photo Machine Model: Komatsu PC450 Total Length:22m Bucket Capacity: 1m^3 Usage Area: Port Construction For detailed information and inquiry, please contact us

Condition: like new (used), Year of construction: 2013, Machine has been equipped with a new PCD software. Bsdpfx Adjx Tpiboleww

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Bodpfxjxqprus Adloww Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.