Used Manuals for sale (13,416)

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Chedpfoxugd Nex Abzed Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment Csdpfogd Ipksx Abzshd space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: excellent (used), functionality: fully functional, overall weight: 7,490 kg, axle configuration: 4x2, first registration: 04/1998, next inspection (TÜV): 01/2026, suspension: steel, Year of construction: 1998, mileage: 1,62,990 km, power: 114 kW (155.00 HP), fuel type: diesel, emission class: euro2, fuel: diesel, load capacity: 200 kg, Equipment: crane, MAN 8.163 LC/Ruthmann Aerial Platform TL 300/30 meters/TÜV: 01.2025. • Manufacturer: MAN • Model: 8.163 LC • Mileage: 162,990 km • First registration: 04/1998 Csdpexuu H Esfx Abzohd • Power: 114 kW/155 hp • Drive configuration: 4x2 • Aerial work platform: Ruthmannsteiger TL 300 • Working height: 30 meters • Transmission: Manual • Suspension: Leaf spring (front and rear) • Basket capacity: 200 kg • 4 extensions • 4x hydraulic outriggers • Heating • TÜV valid until: 01/2026 • Perm. gross weight: 7,490 kg • German vehicle • German documents • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 12/2027, total width: 580 mm, total length: 840 mm, total height: 1,380 mm, input frequency: 50 Hz, electrical fuse: 16 A, power: 2.2 kW (2.99 HP), Planetary mixer Model: Planeto 40 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intrusion protection / safety grille with protective circuit Mixing machine with tool: 1 whisk, 1 dough hook, 1 flat beater 1 40 liter stainless steel kettle manual boiler lift DGUV V3 tested Cedjhhxn Dspfx Abzohd Connection 400V, 2.2 kW, 16A-CEE plug Dimensions: 580 x 840 x 1380 mm, WxDxH with warranty Visit our large bakery machines warehouse!

Condition: new, neu ca. 8 Wochen ab Auftragse Deutschland 3050 € 3000 mm 820 - 940 mm 300 kg/m 350 mm 63 x 3 mm 15 mm 2600 mm 250 mm with mm-scale and magnifier on stop carriage Cjdpfx Aowirnljbzshd rolls and table with manual measuring system and a rigid flat steel guide stop carriage 6-fold ball bearing mounted, manually slideable and fixable fold up material stop FURTHER LENGTHS: 2 meter € 2.523,- 4 meter € 3.905,- OPTIONS: material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 515,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 119,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,466 h, load capacity: 1,400 kg, lifting height: 4,352 mm, free lift: 150 mm, fuel type: electric, mast type: triplex, construction height: 1,900 mm, drive type: Elektro, High-lift stacker Load centre: 600 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 24V Battery type: Lithium-ion Battery year of manufacture: 2017 Cedpfexuw Thex Abzohd Description: The vehicle undergoes a UVV inspection. Before delivery, the machine will receive a service, be cleaned, and newly painted.

Condition: used, Year of construction: 2017, functionality: fully functional, Incoming: Presto CC 40 M Baler Technical specifications: Manufacturer: Presto Chodpfx Aboxuq E Dozjd Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strap, manual Throughput capacity with bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film Note: Channel discharge is fully automatic and adjustable. The lifting-tipping device shown in the photos is not included in the scope of delivery. Please note: All technical data are based on manufacturer’s information. We do not accept any liability for the accuracy of the information provided or for possible errors. Offer is non-binding, subject to prior sale and can be revoked at any time. Inspection possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Chsdjqa Txqopfx Abzsd Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Specifications: • Year of manufacture: 2010, Machine No. 347283 • Fixed angular table • Infinitely variable spindle speed up to 4,500 rpm • Infinitely variable feed in 3 axes from 0 to 2,000 mm/min • Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min • Travel X/Y/Z: 400/350/400 mm • Table size: 650 x 350 mm • Table load capacity: 250 kg • Vertical quill stroke: 60 mm • Vertical and horizontal quill – SK40 taper • Hydraulic clamping system • Weight approx. 1,800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Equipment: Chedsxuppuopfx Abzjd • Heidenhain TNC 320 CNC control • Hydraulic clamping, vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manuals and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition and has seen very few operating hours. It comes from a facility where it was used exclusively for training purposes. The control is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is very straightforward by swinging away the vertical head. The ways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann on-site under power. There are 7 units of Kunzmann WF4/3 with the TNC 320 Heidenhain milling machines available. The machines are available immediately.

Year of construction: 2020, operating hours: 100 h, condition: excellent (used), functionality: fully functional, overall weight: 300 kg, total length: 1,330 mm, total width: 840 mm, total height: 1,870 mm, compressed air connection: 6 bar, type of input current: AC, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min Chjdpfjxuqtbjx Abzjd - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 81300 € 1536.57 € 1015 mm 600 mm 1000 x 400 mm 1000 x 400 mm 670 kg 1100 mm 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2.000 1/min 5,5 kW 1.5 kW 1.1 kW 1.1 kW 3630 mm 2682 mm 2200 mm 4400 x 2300 x 2400 mm 4800 kg 423 kg 670 kg 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine lamp Csdewircijpfx Abzehd machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: new, functionality: fully functional, Year of construction: 2021, load capacity: 1,400 kg, lifting height: 4,730 mm, fuel type: electric, mast type: standard, construction height: 2,800 mm, drive type: Elektro, Pedestrian stacker Mast type: Standard Condition: New machine Technical condition: New Cedpoxuw Tbjfx Abzehd Front tyres type: Polyurethane Front tyres condition: 80 - 100% Rear tyres condition: 80 - 100% Battery volt: 24V Battery type: PzS

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 Cjdpfeub Amljx Abzshd swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Cjdpfxeib D H Rs Abzehd Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from Training Workshop! Technical Data: - Year of manufacture: 2010 Machine No. 347284 - Fixed angular table - Spindle speed: Infinitely variable up to 4500 rpm - Feed rate: Infinitely variable in 3 axes from 0 to 2000 mm/min - Rapid traverse X and Y axes: 5000 mm/min - Rapid traverse Z axis: 4000 mm/min - Travel distances X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system Chsdpfoxupdljx Abzed - Weight approx. 1800 kg - Overall dimensions approx.: 2.3 x 2 x 2 m - Drive power: 15 KVA Accessories and Equipment: - Heidenhain TNC 320 path control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operating manual, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in excellent condition and has very low operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very user-friendly. Additionally, the machine offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the folding vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann under power on site. Seven units of the Kunzmann WF4/3 with TNC 320 Heidenhain milling machines are available. The machines are ready for immediate delivery.

Condition: new, Sales from STOCK! Model: AMWP11.2-8100 Max. Working Height: 11.2 m Max. Platform Height: 9.2 m Max. Horizontal Reach: 3 m Up and Over Height: 7.89 m Guardrail Height: 1.1 m Overall Length: 2.53 m Overall Width: 1.0 m Overall Height (Stowed): 1.99 m Platform Dimension: 0.62 x 0.87 m Ground Clearance (Stowed): 70 mm Ground Clearance (Raised): 19 mm Wheelbase: 1.22 m Loading Capacity: 200 kg Occupants: 2 Turning Radius (Inside/Outside): 0.23 / 1.65 m Turret Rotation: 345° Jib Movement: 130° Travel Speed (Stowed): 4.5 km/h Travel Speed (Raised): 0.5 km/h Up/Down Speed: 42/38 seconds Max. Working Slope: X: 2.5° / Y: 2.5° Tyres: Ø 381 x 127 mm Driving Motor: 24 V / 0.9 kW Lifting Motor: 24 V / 3.3 kW Battery: 24 V / 240 Ah Charger: 24 V / 30 A Weight: 2950 kg AC Driving Motor Proportional Joystick Controls Self-Locking Gate Drivable At Full Height Non-Marking Tyres 4 x 2 Drive Automatic Braking System Emergency Descent System Tubing Explosion-Proof System Fault Diagnosis System Tilt Sensor Alarm Motion Alarm 345° Turret Rotation Horn Hour Meter Charging Protection System Flashing Beacon Drive Enable Cjdeulakkepfx Abzehd Charging Indicator Manual Brake Release Lanyard Attachment Point Tie-Down And Lifting Points Platform Load Sense System Emergency Stop Button Swing Out Components Cover

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Cjdpfxshik Eze Abzshd Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE-compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic tool clamping system >> Weight: approx. 1,800 kg >> Space requirement: approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Features: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping for vertical and horizontal axes >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Codpfoxupc Uox Abzshd Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition, with very few operating hours. Previously used exclusively for training purposes, it features a highly user-friendly control system. The machine offers hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal milling is extremely easy via the tilting vertical head. Guideways are continuously lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann machine under power at our facility. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain controls are available. The machines are immediately available.

Year of construction: 2023, condition: new, 1. Trapeze Bucket (or Trenching Bucket): Purpose: As the name suggests, a trapeze bucket is primarily used for digging trenches. These trenches are often required for laying utilities such as water, gas, or electrical lines. Design: A trapeze bucket is typically narrower than standard digging buckets, and it may have a trapezoidal shape to create trenches of a specific width and depth. Advantages: Precision: Designed for accurate and clean trenching, reducing the need for manual labor to finalize the trench. Efficient: Enables faster excavation, especially for straight-lined trenches. Versatile: Some are designed with replaceable teeth or edges, making them suitable for various ground conditions. 2. Ditch Cleaning Bucket (or Grading Bucket): Purpose: This bucket is used for leveling, grading, cleaning ditches, removing debris, and back-filling trenches. Design: Typically broader and flatter than standard digging buckets, a ditch cleaning bucket might also have a smooth edge to ensure a clean finish. Advantages: Wide Reach: Its broader design means it can cover larger areas in one sweep, making grading and leveling tasks quicker. Smooth Finishing: The flat base allows for a smoother finish on surfaces, which is especially important when preparing for foundations or paving. Chodpfsn Dxf Dsx Abzjd Versatility: Excellent for landscaping projects, creating drainage slopes, or even spreading materials evenly across a site. Conclusion: The right bucket can make all the difference in a mini excavator's efficiency and the quality of its work. By understanding the specific functions and advantages of the trapeze bucket and ditch cleaning bucket, operators can ensure that they are using the right tool for the job, optimizing productivity and outcomes.

Condition: used, Magnet Drilling Machine, Magnet Drilling Machine core hole drilling machine, metal core hole drilling machine DR. BENDER Type EK 323 machine no. 180543 year of construction approx. 1988 drilling capacity 23 mm spindle mounting MK 2 spindle speed 160 / 400 / 1250 rpm. magnet 215 x 105 mm drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear steps Csdpjgmi U Dofx Abzohd - left and right rotation - E-magnet KOCH, type KL32/6 - drill head height adjustment guided in linear guide - manual ejector - drill stand rotatable on magnetic base, clamping via tommy screw dimension L x W x H 680 x 380 x 630 mm weight 35 kg good condition

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 320 Path Control – Excellent Condition, CE-Compliant, from a Training Workshop!! Technical Data: >> Year of manufacture: 2010, Machine No. 347285 >> Fixed angle table >> Infinitely variable spindle speed up to 4500 rpm >> Infinitely variable feed on 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis: 5000 mm/min, Z axis: 4000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1800 kg >> Required floor space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping, vertical and horizontal >> Automatic centralized lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 Chsdpfexupczox Abzjd About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 path control. This universal milling machine is in very good condition and has only a few operating hours. It comes from a facility where it was used exclusively for training purposes. The control system is very easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal operation is straightforward thanks to the fold-away vertical head. The guides are regularly lubricated via the centralized lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to view and test the Kunzmann under power at our premises. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 control are available. The machines are available for immediate delivery.

Year of construction: 2023, condition: new, Field of application: Construction Cjdpfx Abjn Tm Ngszohd 1. Trapeze Bucket (or Trenching Bucket): Purpose: As the name suggests, a trapeze bucket is primarily used for digging trenches. These trenches are often required for laying utilities such as water, gas, or electrical lines. Design: A trapeze bucket is typically narrower than standard digging buckets, and it may have a trapezoidal shape to create trenches of a specific width and depth. Advantages: Precision: Designed for accurate and clean trenching, reducing the need for manual labor to finalize the trench. Efficient: Enables faster excavation, especially for straight-lined trenches. Versatile: Some are designed with replaceable teeth or edges, making them suitable for various ground conditions. 2. Ditch Cleaning Bucket (or Grading Bucket): Purpose: This bucket is used for leveling, grading, cleaning ditches, removing debris, and back-filling trenches. Design: Typically broader and flatter than standard digging buckets, a ditch cleaning bucket might also have a smooth edge to ensure a clean finish. Advantages: Wide Reach: Its broader design means it can cover larger areas in one sweep, making grading and leveling tasks quicker. Smooth Finishing: The flat base allows for a smoother finish on surfaces, which is especially important when preparing for foundations or paving. Versatility: Excellent for landscaping projects, creating drainage slopes, or even spreading materials evenly across a site. Conclusion: The right bucket can make all the difference in a mini excavator's efficiency and the quality of its work. By understanding the specific functions and advantages of the trapeze bucket and ditch cleaning bucket, operators can ensure that they are using the right tool for the job, optimizing productivity and outcomes.

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling Csdpfx Abjw Dvv Ajzohd - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Year of construction: 2021, condition: new, Layout: Spreader Chsdpfoph Rmvsx Abzed Selling price: € 5.250, US$ 5.528 Skid Steer salt and sand spreader is hydraulically powered by your skid steer loader and is designed to handle most dry, free flowing granular materials, including salt, sand, seed and fertilizer. Ideal for sidewalks, parking lots, driveways and roads. This unit is engineered with minimal moving parts to reduce maintenance costs. You will have the ability to scoop your material with your loader and not have to hand fill. There is a manual flow gate assembly to control the flow of light materials to the discharge assembly. Hydraulic hose and couplers are included in the price. For detailed information please contact us

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever Cedpfovt U Tmsx Abzohd - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition