Used Operating Instructions for sale (25,409)

Condition: excellent (used), For sale: Original Ziegler FP 8/8 (DIN 14420) portable fire pump with the legendary Volkswagen air-cooled engine – 1192 cm³ displacement, 34 HP. ✅ Key specifications: • Manufacturer: Albert Ziegler Giengen/Brenz (Germany) • Model: FP 8/8 • Year of manufacture: 1974 • Engine: Volkswagen Type 122 – 1.2 petrol, 34 HP at 3600 rpm • Pump capacity: 800 l/min • Head lift: 80 mWS • Rated speed: 4000 rpm • Weight: 190 kg • Gear ratio: 1:1.45 • Operating hours: 16.3 h – practically like new! ✅ Condition & features: • The fire pump is complete and in fully original condition. • Nameplates and markings are intact. • The VW engine starts easily and runs smoothly. • Mobile design, easy to transport. • Ideal for a museum, collection, display, or as a reserve unit for a volunteer fire department. 🔥 Unique – VW Beetle engine in fire service! Volkswagen engines used in Ziegler pumps are highly valued today – reliable, easy to service, and collectible. 📦 Collection in person or transport upon arrangement. Godpfoxa En Rjx Ah Djkf

Condition: good (used), Year of construction: 2020, operating hours: 22 h, Internal Article No.: 25019 Scrubber Dryer Gsdpfx Ahjwq Nd Ts Dokf Nilfisk BA 751 Serial No.: 3510172302 101 Year: approx. 2020 / 2021 (not visible) Only approx. 21.5 operating hours! The machine works perfectly and will continue to be used until sold. Therefore, additional operating hours may be added.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,110 h, load capacity: 2,500 kg, lifting height: 3,680 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 560 Ah, battery voltage: 80 V, DGUV certified until: 11/2026, fork length: 1,100 mm, Equipment: UVV, cabin, front guard, lighting, sideshift, Still RX 60-25 Electric Forklift with the following specifications: Operating hours: 3,110 Lifting capacity: 2,500 kg Lifting height: 3,680 mm Overall height: 2,550 mm Year of manufacture: 2017 Gjdexvn Iljpfx Ah Dskf STILL 2.5-ton electric forklift with full cabin, telescopic clear view mast, side shifter, load guard, fingertip controls, single-pedal operation, lighting, fork length 1,100 mm, battery charger Sold as-is, without any technical or cosmetic reconditioning Since the machine is incoming, the following options are available at an additional cost: - New front and rear tires - Battery inspection, testing, and regeneration - Cleaning and cosmetic refurbishment - Service according to manufacturer’s specifications - Technical inspection (UVV or FEM 4.004 test) Further information about the unit is available by phone or email. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp trailer (transport costs on request). For more information and offers, please visit our website.

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Rotor diameter 368 mm with 40 knives Motor 22 kW Only 850 operating hours Godpfoxyud Ijx Ah Dskf

Condition: ready for operation (used), Year of construction: 2010, operating panel for Lisec machines Gksdjl Dwrpjpfx Ah Dof

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2016, load capacity: 1,000 kg, fuel type: electric, gearing type: automatic, tire condition: 100 %, color: silver, vertical order picker for sale in mint condition with minimal operating hours CROWN LP 3500 vertical picking fork lift 6! operating hours Gedpfx Ash Ryrfeh Dskf CrownLP3520-1.0 year of manufacture: 2016 operating hours: 75h charger type: Filon Futur 24V 75A Nominal load at COG 1 t Wheel base: 1,285 m Transport length:2.88m Transport width:0.95m Transport height: 2.3 m Lifting height: 2.44 m Aisle Width: 1.4m Center of gravity: 600mm Traction engine: 1.5 kW Hoist motor: 2.5 kW Weight: 1,437 t Battery weight: 0.457 t Battery capacity:24/325V/Ah Travel speed with / without load: 9.5/5.9 km/h Hoisting with / without load:0.12/0.16 m/s Lowering with load:0.22/0.17m/s Turning radius: 1,589 m

Condition: excellent (used), For sale: Professional Ziegler FP 8/8 Ultra Leicht fire-fighting portable pump (DIN 14420), manufactured in 1997 in Germany. This is a premium-class unit in the Ultra Leicht (Ultra Light) version, designed for easy transport and ergonomic operation. Technical specifications: • Model: FP 8/8 Ultra Leicht • Year of manufacture: 1997 • Rated output: 800 l/min • Rated pressure: 8 bar • Maximum output: 1030–1946 l/min Gkjdpfoxa Euqox Ah Def • Rated speed: 4400 rpm • Gear ratio: 1:1 Engine: • 2-cylinder petrol engine, air-cooled • 12V electric starter • Reliable and easy-to-service construction Condition: • Original hour meter: 142 operating hours – very little use • Pump is complete, fully functional, and ready for operation • All gauges, indicator lights, and controls are fully operational • Control panel with operating instructions in German Applications: • Volunteer & professional fire departments – for field or reserve units • Agriculture & industry – fast pumping of large volumes of water • Flood protection, emergency drainage • Firefighting equipment enthusiasts and collectors

Condition: used, Siemens DESIGO PXM20-E Operating unit Data sheets and infomration ————— SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR034 Listing name: SIEMENS PXM20-E Operating Unit Gkodpfsxziaasx Ah Def

Condition: like new (used), Year of construction: 2021, operating hours: 44 h, load capacity: 2,000 kg, lifting height: 1,724 mm, fuel type: electric, mast type: duplex, construction height: 1,390 mm, mileage: 44 km, AS GOOD AS NEW This 2021 Still electric DUO stacker is in excellent condition; Gjdoxhdhxspfx Ah Dskf Capacity: 2,000 kg; The stacker lifts up to 1,724 mm; Drive-through height: 1,390 mm; Equipped with INITIAL LIFT, making it ideal for uneven floors; ONLY 44 hours on the clock! The 2021 battery features an automatic filling system and an external charger; Schedule an appointment for a test drive. Watch the video on YouTube.

Condition: used, CNC control in operator panel / machine operating terminal CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel Gksdpfxelb I D Tj Ah Djf - Electronic handwheel - Flexible silicone PC keyboard Dimensions (WxHxD): 600 x 260 x 350 mm Weight: approx. 40 kg From a GILDEMEISTER CNC lathe. From stock, functionality not tested, ideal as a spare part donor.

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Gksdpfxeiidq Ns Ah Dsf -Manufacturer: Bierrebi, control panel from automatic cutting machine Bierrebi TA 103 -Dimensions: 435/220/H90 mm -Weight: 1.6 kg

Condition: excellent (used), For sale: professional fire-fighting portable pump Albert Ziegler FP 8/8 (DIN 14420). The unit is in outstanding technical and visual condition – only 91 operating hours! Key details: • Manufacturer: Albert Ziegler GmbH, Germany • Model: FP 8/8 – Ultra Leicht • Year of manufacture: 1992 • Hours: 91 h (documented with VDO meter) • Engine: Hirth, 2-stroke, air-cooled – proven reliability • Rated capacity: 800 l/min at 8 bar • Rated speed: 4,400 rpm • Original nameplate, fully complete Condition and advantages: • Very low hours • Fully operational • Well-maintained, dry, no modifications • Ideal for volunteer fire brigades, agricultural use (irrigation, pumping), technical services, or as a collector’s item Ready for work The equipment is ready for immediate use. Ziegler portable pumps are synonymous with top quality – durability and reliability proven in hundreds of fire brigades worldwide. Gjdpfx Ahexa Evuo Dekf

Condition: good (used), Year of construction: 2018, operating hours: 1,619 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 472 kg, mileage: 1,619 km, Well-functioning electric pallet truck Linde T16 from 2018; Capacity of 1,600 kg; 1,619 hours on the counter; Equipped with battery, external charger, and automatic filling system Gksdpfx Aow Tk R Sjh Djf

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Gkodpfx Ajih S I Uoh Def -Manufacturer: Bierrebi, control panel from automatic cutting machine Bierrebi TA 103 -Dimensions: 435/225/H80 mm -Weight: 1.5 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516329J00102, Year of construction: 2018, operating hours: 11,771 h, load capacity: 5,000 kg, lifting height: 4,400 mm, free lift: 1,530 mm, mast type: triplex, fork width: 2,050 mm, TECHNICAL DETAILS Lifting capacity: 5,000 kg Lift height: 4,400 mm Free lift: 1,530 mm Fork length: 2,400 mm Godex Ahnfopfx Ah Dokf Maximum fork width: 2,050 mm Minimum fork width: 560 mm Overall height (under clearance): 2,320 mm Mast type: Triplex MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,400 x 2,320 mm Unladen weight: 7,616 kg Fuel type: Electric Battery capacity: 930 Ah Battery voltage: 80 V Number of wheels: 4 Operating hours: 11,771 h EQUIPMENT Fork positioner Side shift Heater Full cabin Free lift Work lights

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 36956, total length: 9,800 mm, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 600 kg, plate height: 1,060 mm, TECHNICAL DETAILS Workpiece height: 60 mm Edge thickness: up to 3 mm Minimum panel width: 55 mm Minimum panel length: 100 mm Panel height: 1,060 mm Tool interface: ISO 30 MACHINE DETAILS Dimensions & weight Total length: 9,800 mm Weight: 600 kg Input frequency: 50 Hz EQUIPMENT Return system Operates with PUR adhesive Spray system Pre-milling unit RT 20 Gluing unit SP 20 6-position edge magazine End trimming unit IT 90-S Rough milling unit RS 10 Fine trimming unit RF 40 Note: Further information regarding equipment can be found on the attached machine data sheet. Gjdpfx Ahjx A Tzqs Dskf

Condition: ready for operation (used), Year of construction: 2005, operating hours: 1,12,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Gjdpfx Asx A Dbbeh Dskf Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Gkjdpfx Ahoxy Hcis Dof Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Gjdox Af S Uepfx Ah Dokf Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,832 h, functionality: fully functional, turning length: 135 mm, turning diameter: 190 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 42 mm, controller model: FANUC 18i-TB, Equipment: bar feeder, TECHNICAL DETAILS Maximum turning diameter: 190 mm Maximum turning length: 135 mm Maximum bar diameter: 42 mm Spindle speed: max. 5,000 rpm Spindle bearing diameter: 85 mm Gkodpexz Audjfx Ah Def Power: 7.5 kW Tailstock / Turret Boring bar holder: 25 mm Travel X-axis: 162.5 mm Travel Z-axis: 450 mm Travel Y-axis: ±30 mm Travel A-axis: 475 mm Rapid traverse X-axis: 18 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse Y-axis: 12 m/min Rapid traverse A-axis: 30 m/min Driven tools Tool magazine positions: 12 Max. speed driven tools: 4,000 rpm Drilling capacity (diameter): 13 mm Milling capacity (diameter): 13 mm Tapping: M4 – M8 Number of tool magazine positions: 12 MACHINE DETAILS Control: FANUC 18i-TB Dimensions & Weight Dimensions (L × W × H): 2,950 × 2,015 × 2,000 mm Machine weight: 6,700 kg Axes: 8 Simultaneously controlled axes: 4 Operating hours Power on time: 51,408 h Operating time: 17,832 h Piece counter: 670,941 pcs EQUIPMENT 2 turrets Sub-spindle Bar feeder IEMCA BOSS 545E Chip conveyor 5 driven tools 9 standard tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Godpfex A Hagjx Ah Dskf Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, turning length: 1,540 mm, travel distance X-axis: 495 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,560 mm, swing diameter over bed slide: 660 mm, controller model: MSX-711 (MAPPS IV), Partially overhauled machine with only approximately 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/Milling Spindle X-axis travel: 495 mm Y-axis travel: 125 mm Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool Magazine Magazine positions: 76 Tool holder: Capto C6 Lower Turret Number of tool stations: 10 Tool change time: 0.19 s Main Spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub Spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control system: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air nozzle for chuck and tool tip Automatic tool measurement system for upper and lower positions Bar feeder interface Gkjdpfx Aox An Uxoh Def Hobbing function

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Gkjdpex A A E Esfx Ah Djf Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Total weight: 10,000 kg Gedpfexzt R Nex Ah Djkf Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W

Condition: ready for operation (used), Year of construction: 2014, operating hours: 49,462 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, The toggle lever mechanism has been completely overhauled! TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen dimensions (H x W): 1,030 x 1,140 mm Tie bar spacing (H x W): 710 x 710 mm Minimum mould height: 300 mm Maximum mould height: 710 mm Maximum opening stroke: 1,380 mm Centerring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s MACHINE DETAILS Control system: B6P Operating hours: 49,462 h EQUIPMENT Pneumatic valves: 4 units Cores: 2 units Toggle lever mechanism completely overhauled Gedpfxjx A A Ako Ah Djkf