Used Maxion Bs 25 St for sale (52)

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: Ledpfxsfg U Tns Aansak - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Year of construction: 2015, machine/vehicle number: 188786, Tapping machine Make: MAXION Model: BT 15 GL Year of manufacture: 2015 - workshop tested Machine no.: 188786 4 speeds 320, 560, 1,000 and 1,600 rpm. Accessories: - Lead screw device for jig-like threads - Lead screw change by means of quick coupling Ledpfx Aasvc A U Djnoak - Safety device against tool breakage - Program for single or continuous cycle - electronically controlled motor braking for single cycle - Electrical hood guard - electric chuck protection hood - 3m connection cable with 16A CEE plug - operating instructions incl. the following options: - Pull-out circuit After the safety device is activated device is activated, this enables the quill to be return the quill to the home position at the the push of a button. Without this device, the spindle must be the spindle must be turned back manually until the the home position.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges Laedpfx Aaour H Ehonsk

Condition: new, MAXION BTB 20 Bench drill Powerful MK2 bench drill with easy-scroll control wheel and large display. Digital drilling depth, piece counter, drill depth fine adjustment and LED light are already part of the standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical data Normal drilling capacity 20 mm Tapping capacity M 16 spindle MK 2 drilling depth 100 mm throat 250 mm spindle / table 20 - 430 mm spindle / base plate 645 mm table surface 450 x 315 mm T-slot width 12 mm column diameter 90 mm total height 1.100 mm weight 160 kg Motor pole-changing 0.6 / 1.2 kW Optional accessories: Drilling package Tapping device with digital depth display Cross table MF3 Lasdpfx Aaed Tf T Tsnek Base cabinet Electric cooling device Spindle speeds infinitely variable 100 - 1,800 rpm or 200 - 3,600 rpm. Please specify the range of revolutions when making your inquiry. Note: ALSO AVAILABLE AS A COLUMN DRILLING MACHINE

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed Laedpsfg U Tqefx Aanjk - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 4 Basic Condition: New machine Spindle speed (infinitely variable): Range A 120 - 2.500 rpm Laodpfxeci Su De Aansk range B 60 - 1.250 rpm normal drilling capacity: 40 mm standard equipped with: - stepless drill feed - thread cutting device - infinitely variable speed control - handle cross switch - digital display for speed, feed and drilling depth - chip breaking function - operating instructions with the following options: - Free cutting device

Condition: good (used), Year of construction: 2000, Offer 25273 Technical specifications: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mount: MT 3 - Drill spindle stroke: 125 mm - Infinitely variable spindle speeds: 80 - 3200 rpm Lajdpfx Aajw Hx Iasnjk - Tapping capability, right/left rotation up to M20 - Throat depth: 260 mm - Max. distance table – spindle: 825 mm - Table with 2 T-slots: 500 × 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Required space approx.: W 500 × H 1900 × D 950 mm - Weight approx.: 230 kg

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm Lodpfxjgv I Uns Aanoak T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip Laodpfx Aaofg U Thenok - 230 volt mains connection

Condition: new, Bench drill Make: MAXION Lsdpobbd Dcofx Aansak Model: ECOMAX 14 Condition: New machine spindle speed (infinitely variable): 420 - 2.100 rpm normal drilling capacity: 15 mm standard equipped with: - full motor protection - infinitely variable speed control - digital speed display - table adjustment via toothed rack - drill protection for quill diameter 60 mm - emergency stop button - operating instructions

Condition: used, Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm Lsdpfeut Uzaox Aaneak - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Lasdpfxjfrlndj Aanek Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting Ljdpfefg U Tiox Aaneak - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, Bench drill Ljdpfsci A S Sox Aaneak Make: MAXION Model: UNIMAX 1 TAP Condition: New machine spindle speed (infinitely variable): 200 - 4.000 rpm normal drilling capacity: 18 mm standard equipped with: - thread cutting device - digital speed display - digital drilling depth display - table adjustment via toothed rack - instruction manual

Condition: new, MAXION Unimax 4 Basic Plus pillar drilling machine Universal and very modern pillar drilling machine with MK4 spindle, tapping device, enormous power and very good price-performance ratio. The display shows feed, speed and drilling depth and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 35 mm Drilling capacity normal 40 mm Lsdjgv I U Ijpfx Aanoak Tapping capacity M30 spindle MK 4 drilling depth 175 mm throat 300 mm distance spindle/table 70 to 830 mm table surface 650 x 500 mm column diameter 140 mm total height max. 1.980 mm weight 480 kg motor power 1,5/3,0 kW Spindle speed infinitely variable: Range A 120 - 2,500 min/1 Range B 60 - 1,250 min/1 Description: LED machine light Tapping device Chip breaking Chip removal Free cutting Details see data sheet in the appendix - please ask for further models

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 30 - 400 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Lajdpfxepam Hro Aansk Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm Lodsb Hl Irepfx Aanoak normal drilling capacity: 30 mm standard equipped with: - Full motor protection - reversing switch right/left rotation - digital speed display - table adjustment via toothed rack - drill protection - emergency stop button - instruction manual

Condition: new, MAXION ECOMAX 14 bench drill Precise, smooth-running bench drill in modern design. Digital speed display, table adjustment via toothed rack, emergency stop pushbutton. Technical data: Continuous drilling capacity in E335 14 mm Normal drilling capacity 15 mm spindle MK2 drilling depth 70 mm throat 180 mm spindle / table up to 380 mm spindle / base plate 529 mm table surface 250 x 220 mm T-slot width 10 mm column diameter 65 mm total height 890 mm Lodpfxocgbw Ss Aansak weight 80 kg Motor pole-changing 0,5 / 1,0 kW Mains connection 400 V 50 Hz Spindle speeds infinitely variable 420 - 2,100 rpm. Equipment: Infinitely variable speed control Table adjustment via toothed rack Digital speed display Full motor protection Drill protection

Condition: new, bore capacity in steel (diameter) 14 /15 mm throat 180 mm bore stroke 70 mm turning speeds 420 - 2100 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm Laodsfg U Tgopfx Aansk total power requirement 0,5/1,0 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Table Drilling Machine with: variable feed Tapping function. depth display Coolant system Belt-drive spindle protection machine light

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed Ledpfx Aaod Hrhvonjak -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: new, MAXION Unimax 1 TAP bench top drilling machine with integrated tapping attachment Laedpfx Aegv I Uvoansk Very powerful, universal bench drill with integrated thread cutting device and programmable digital display. Electrical drill protection as well as mains connection 230 V. Technical data: Continuous drilling capacity in St 60 15 mm Drilling capacity normal 18 mm Tapping capacity M 8 spindle MK 2 drilling depth 80 mm throat 180 mm distance spindle/table up to 380 mm table surface 250 x 220 mm column diameter 65 mm total height 910 mm weight 80 kg Motor power 1,1 kW spindle speed stepless 200 - 4.000 rpm. Spindle speed threaded 200 - 700 rpm. Mains connection 230 V / 50 Hz Equipment: Infinitely variable speed control Table adjustment via toothed rack and worm gear Thread depth programmable Digital display Switch for clockwise / anticlockwise rotation Optimal for locations without three-phase connection Details see data sheet enclosed - please ask for further models

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - infinitely variable drill feed - infinitely variable speed control - digital display for speed, feed and and drilling depth Lodpfobrfmkox Aansak - automatic tool ejector - operating instructions with the following options: - Tapping device

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 Lsdpfx Aasgv I U Sjneak drilling depth 125 mm throat 260 mm distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm total height 1.900 mm weight 280 kg motor power 0,8/1,5 kW Spindle speed infinitely variable range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models

Condition: new, MAXION BT 20 Bench drill Powerful MK2 machine with easy-scroll control wheel and large display. Digital drilling depth, piece counter, drill depth fine adjustment and LED light are already part of the standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical data: Normal drilling capacity 20 mm Tapping capacity M 16 Spindle MK 2 drilling depth 100 mm throat 215 mm distance spindle/base plate 185 - 541 mm table surface 340 x 445 mm T-slot width 12 mm column diameter 90 mm total height 990 mm weight 120 kg Motor pole-changing 0,6/1,2 kW Mains connection 400 V/50 Hz Lodpfx Aasf Nrbfsneak Two spindle speeds possible: MAXION BT 20 (M00027) Spindle speeds infinitely variable 100 - 1,800 min-1 MAXION BT 20 (M00028) Spindle speeds infinitely variable 240 - 3,600 min-1 Optional accessories Drilling package Tapping device with digital depth display 200 mm longer column Cross table MF3 base cabinet electric cooling device Note: ALSO AVAILABLE AS A COLUMN PIPE MACHINE

Condition: new, MAXION UNIMAX 1 frequency bench drilling machine Description: Precise, smooth running bench drill, in high accuracy and quality. Switch for clockwise / anticlockwise rotation, drilling table adjustable via rack adjustable and swivels around the column. Technical data: Continuous drilling capacity in E 335 15 mm normal drilling capacity 18 mm Tapping capacity M 8 spindle MK 2 drilling depth 80 mm throat 180 mm spindle / table up to 380 mm table surface 250 x 220 mm T-slot width 10 mm column diameter 65 mm total height 910 mm weight 80 kg Motor frequency controlled 1,1 kW Mains connection 230 V / 50 Hz Lasdocgbx Hepfx Aanok Spindle speed infinitely variable 200 - 4,000 min-1