Used Mc Km 250 for sale (19,078)

Condition: ready for operation (used), Philips 9404 462 08331 PMC1000 DIT 38 electronic module, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Lsdsi Eckbspfx Aqvorl

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Lsdsykkhxepfx Aqvorl Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 750 mm, turning diameter: 365 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 6,000 rpm, Mori Seiki NL 2500 SMC/700 with sub-spindle TECHNICAL DETAILS Control: MSX-850III Main spindle size: A2-8 Counter spindle size: A2-6 Main spindle bore: 80 mm Main spindle speed: 4,000 rpm Integrated main spindle motor: 18.5 kW Lodpfewqc T Ujx Aqvorl Integrated motor for counter spindle head: 11 kW C-axis: main and counter spindle Motor starting torque: 640 N/m Turning diameter: 755 mm Machinable diameter: 365 mm Machinable length: 750 mm Speed of powered tools: 6,000 rpm Direct drive motor for powered tools: 5.5 kW Indexing time for turret change: 0.2 s Turret slots: 12 stations, all powered Rapid traverse speed: 30 m/min (X and Z axes) MACHINE DETAILS Weight: 6,500 kg Short bar loader: LNS Quick Load Servo II Measurement: Two arms for automatic measurement of Renishaw tools Interfaces: via USB, PCMCIA card, and RS 232 EQUIPMENT - C-axis on both spindles - Hainbuch clamping system BZI 65 - Three-jaw chuck Schunk 165 mm - Oil cooler for both Daikin spindles - Interface for bar feeder - Automatic parts gripper - Foot pedal for independent opening and closing of main and counter spindle chucks - Knoll filtration system with high-pressure pump - Transformer - Documentation

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Lrodpfx Aqow Uf Tkovsl Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: excellent (used), Stair Tensioner (28366) Lsdpfx Ajln Ulaeqverl Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Weight 8,5 kg

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D Lrsdpfx Aewwarujqvjl spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Lrsdpfx Aqsdd Tpiovel Plate: Width below 250 mm Less than 500 mm length Opening width 250 mm Weight 72 kg

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. Lrjdpfx Aqof U Spxovsl The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! Ledpfovzkylex Aqvjrl 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: refurbished (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC6 Lodpfx Ajnh Rhvsqvorl TECHNICAL DATA CLAMPING UNIT - injection force: kN 10000 - distance between columns (h x v): mm 1400 x 1120 - distance of mold opening max: mm 1700 - mold installation height min/max: mm 700/1200 - opening stroke of the clamping platen: mm 2400 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 65 - dimensions of the machine (L x W x H): m 10,98 x 3,29 x 2,49 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: used, mileage: 1,97,411 km, power: 184 kW (250.17 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 9,180 kg, maximum load weight: 5,820 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 5,900 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: other, emission class: euro5, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, immobilizer system, tail-lift, * German vehicle * 1st hand * Original only 197,411 kilometers * See photos for condition Lrodovhqarepfx Aqvjl * Special vehicle for pollutant collection * Body manufacturer Dünnschede * Foldable box wall * MBB tail lift * max. load capacity 1500 kg * Special stainless steel shelving system * Stainless steel floor pan * Special restraint system for shelf/ container * Interior lighting * Emergency shower * Hand wash basin * Case heating * Acceptance door on the right with staircase * Interior dimensions length 6,500 mm x 2,450 mm x 2,200 mm height * Leaf/air suspension + raise/lower * Cab with 2 air-sprung comfort seats * Seat heating * Air conditioning * Differential lock * Engine brake * Cruise control * Electric windows * heated electric mirrors * Reversing camera * Turn assist with camera and screen * Spare wheel holder * Storage box * Wheelbase 5.90m * 15,000 kg gross vehicle weight * Unladen weight 9,180 kg * Payload 5,820 kg If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t Lodpfsf Nb Hkjx Aqverl dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 27 mm spindle clearance - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° Lodpfx Aqef Nb Hgovorl connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.

Condition: ready for operation (used), machine/vehicle number: 1352, functionality: fully functional, pressing force: 250 t, table width: 800 mm, table length: 1,150 mm, ram adjustment: 140 mm, stroke rate (max.): 45 1/min, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Rated pressing force: 2,500 kN Max. stroke rate: 45/min Ram adjustment: 30 - 140 mm Lrsdpfx Aqsy D Rtpsvel Table dimensions: 1,150 x 800 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,000 x 2,000 x 2,900 mm Machine weight: 12,800 kg External reference: 54

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Lrjdpfx Aoy Txyceqvol Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5351126, controller model: Siemens 840D, number of slots in tool magazine: 42, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Tool holder: SK-40 Tool magazine: 42 positions MACHINE DETAILS Lsdpfxjy S S N Io Aqvjrl Control system: Siemens 840D EQUIPMENT Tool breakage monitoring Filter unit: Knoll, type VRF 300/800 Chip conveyor: Knoll, type 340 K-1/100

Condition: excellent (used), Year of construction: 2002, pressing force: 250 t, stroke length: 180 mm, table width: 780 mm, table length: 1,200 mm, ram plate length: 1,200 mm, year of last overhaul: 2026, 250 tons 1200 x 780 plate dimensions Ledpjy T H Inofx Aqverl 20-180 stroke 650 mm center distance (approximate) 38 revolutions per minute Steel body COUNTRY OF ORIGIN: TURKEY REVISION DATE: 05/2026 FULLY RECONDITIONED IN OUR MACHINE FACTORY.

Condition: excellent (used), Catalogue number 7961 TECHNICAL DATA - Track width: 250mm - Shaft width: 250mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 100mm - Table width with clearance: 940mm - Table length: 1700mm Top: – Pawls/kickers – Metal pressure roller, smooth – Shaft with saw blades – Metal pressure roller, smooth, 2 pcs Bottom: – Guide rail – Pawls/kickers – Smooth sliding roller – Track chain – Central lubrication – Feed motor 4kW – Main motor 37kW – Stepless feed speed control – Manual body lift – Manual shaft lift (with saw blades) – Extraction port diameter: 200mm – Overall machine dimensions (LxWxH): 1800x1500x1700mm – Weight: 1956kg Ljdpfxsyzzmue Aqvorl ADVANTAGES – German made – Stepless feed speed adjustment – Used multi-saw in very good condition Net price: 22900 PLN Net price: 5450 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with stronger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW Lrjdpfxsyyyd Ns Aqvol - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7959 TECHNICAL DATA - Track width: 250 mm - Shaft width: 250 mm - Maximum saw blade diameter for multi-blade saw: 350 mm - Saw blade bore diameter: 70 mm - Maximum cutting height for multi-blade saw: 120 mm - Table width with clearance: 830 mm - Table length: 1780 mm – Top section: - Kickback devices - Pressure roller, sliding, metal, smooth - Kickback devices - Pressure roller, sliding - Shaft with saw blades - Pressure roller, sliding, metal, 2 pcs – Bottom section: - Guide rail - Kickback devices - Track (caterpillar) Lrsdpfxsy Am Ero Aqvsl - Electric body up/down adjustment - Manual adjustment of shaft with saw blades - Central lubrication - Infinitely variable feed speed adjustment - Feed motor 1.1 kW - Main motor 37 kW - Extraction port diameter: 170 mm - Overall dimensions (L/W/H): 2000x1500x2000 mm - Weight: 1850 kg ADVANTAGES – German-made – Used multi-blade saw, in very good condition Net price: 45,900 PLN Net price: 10,930 EUR depending on the rate of 4.2 EUR (Prices may change with greater fluctuations)

Condition: used, functionality: fully functional, power: 29 kW (39.43 HP), fuel type: diesel, empty load weight: 4,965 kg, Year of construction: 2013, operating hours: 6,091 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Lrjdpfx Aqsy Trwnovsl Technical condition: good Description: Excavator - tracked excavator - mini excavator Takeuchi TB 250 - - Year of manufacture 2013 - - 6091 operating hours - - MARTIN - POWERTILT + hydraulic quick coupler - - 2 pcs. digging buckets 40 + 80 cm - - 1 pc. ditching bucket 130 cm - - 4965 kg operating weight - - Work lights - - Cabin - - Heater - - Auxiliary hydraulics - - 4-cylinder YANMAR diesel engine, 40 hp - - 3rd and 4th circuit to the Powertilt - - new seat cushion installed - - major service recently performed - - good rubber tracks - - good condition!! Inspection and test drive on site are welcome! Quick coupler, buckets, 3rd valve, 4th valve, work lights rear, work lights front, heater, full cabin.

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Ledpjykl Iasfx Aqvjrl Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: new, functionality: fully functional, power: 132 kW (179.47 HP), fuel type: electric, color: other, overall weight: 11,250 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CC200 Capacity: 200-250 t/h Max. Feed opening: EC 185 mm C 145 mm MC 115 mm M 90 mm MF 75 mm F 50 mm EF 35 mm Lrjdpfx Aqsy S Agwsvjl Motor: 132 kW Head diameter: 1100 mm Dimensions (width * height): 2520* 2540 mm Countershaft Speed-rpm: 750-1200 Weight: 11230 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, power: 22 kW (29.91 HP), pressing force: 250 t, stroke length: 160 mm, table width: 700 mm, table length: 1,100 mm, throat depth: 350 mm, stroke adjustment: 150 mm, Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate Lsdpfx Aex N Nfbeqverl • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.