Used Measuring Arm for sale (11,092)

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RA-7535, measuring range X-axis: 1,750 mm, measuring range Y-axis: 1,750 mm, repeat accuracy: 0.04 mm, Very neat measuring arm from the brand Romer Hexagon. With a measuring range of 3500mm and an accuracy of < 0.04mm, this measuring arm in combination with PolyWorks software is a very user-friendly system that allows you to perform accurate measurements for years to come. A HP-L-8.9 3D scanner has been added to the 6-axis measuring arm, making it a complete measurement system. The PolyWorks Inspector software, including scanning, version 2019, is included. Iedpju Hqfpofx Ahhetk

Condition: used, Year of construction: 2018, functionality: fully functional, arm reach: 2,500 mm, Equipment: documentation/manual, For sale: A high-quality HEXAGON Absolute Arm 8525 (7-axis) with RS5 laser scanner, purchased new at the end of 2018. The system has been carefully maintained, used exclusively in an industrial environment, and serviced regularly. Isdpfjy Iagaex Ahhstk The measuring arm is ideally suited for: # Quality control # Incoming goods inspection # In-process measurements # Reverse engineering # 3D scanning and surface capture A valid calibration / ISO-10360-12 certificate is available and can be supplied upon request. Technical data (measuring arm) # Model: HEXAGON Absolute Arm 8525 # Axes: 7 # Measuring volume: 2.5 m # Encoders: Absolute encoders & SMART sensors # Zero-G counterbalance with SmartLock & HomeDock # Wrist display with haptic feedback # SpinGrip & SpinKnob # Base plate with mounting ring RS5 Laser Scanner (installed) # Premium RS5 laser scanner for point and surface scans # Operation in standard or compact mode # Removable pistol grip (sizes: small / medium / large) # ODU-USB & ODU twin cable (USB/LAN) # Certified scan report for arm + scanner Comprehensive accessories (see photos) ✔ Control Pack 3 (wireless, installed) ✔ TESA / TKJ CFRP probes (including 3 mm / 6 mm ruby, 15 mm steel) ✔ Calibration sphere & length gauge ✔ Magnetic mounting plate ✔ Block spring set ✔ Hook wrench ✔ Transport & accessory case (original HEXAGON) ✔ Power supply, dust cover ✔ PolyWorks USB dongle (for Inspector, license status on request) Software # PolyWorks Inspector™ Premium (original purchase) ➡ License details / transferability to be clarified upon request Your advantage # Significantly more affordable than new # Immediately available # Proven industrial quality by HEXAGON # Ideal for QC, contract measurement, prototype construction & manufacturing Inspection & Shipping # Inspection and testing by arrangement possible # Shipping carefully packaged in the original case # Collection preferred

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: SAA81E9S0112721, Technical characteristics: System Components - XR1 Evaluation Unit: PC-based system with MarWin software - SD26 Drive Unit: Skidless tracing system with motorized height adjustment - ST-G Measuring Stand: Granite base (500 × 300 mm) with manual column adjustment Measurement Capabilities - Tracing length: 1.75 mm, 5.6 mm, 17.5 mm (DIN/ISO); 1–16 mm (ISO 12085) - Tracing speed: 0.2 mm/s or 1 mm/s - Positioning speed (X-axis): 5 mm/s - Height adjustment (Z-axis): 7.5 mm motorized - Positioning speed (Z-axis): 2 mm/s Itedpfoxx R Rnex Ahhek - Measuring range: ±250 µm (±500 µm with extended probe arm) - Probe force: ~0.7 mN Probe System: BFW 250 (skidless, magnetic mount for fast change) Software & Evaluation - Supported parameters: R, P, W, Motif, D profiles - Standards: ISO, JIS, MOTIF (ISO 12085) - Features: - Over 80 surface parameters - Automatic cutoff and measuring path selection - Quick & easy measuring programs - PDF report generation - ASCII export and USB data transfer - Multi-user levels and calibration reminders Hardware & Interface - PC: All-in-one or industrial PC (optional) - Connectivity: USB and Bluetooth (for drive unit) - Display: Touchscreen interface with intuitive icons Accessories: - CT 120 cross table - Calibration set - Magnetic probe arm holder - Optional contour evaluation module Machine status: WORKING

Condition: like new (used), Year of construction: 2024, functionality: fully functional, FARO Quantum M Max 3.0m – 7-axis measuring arm for sale incl. Polyworks We, R+S Metallbearbeitung & Lasertechnik GmbH & Co. KG, are selling a FARO Quantum M Max 3.0 m 7-axis FaroArm, 6th generation. Features - FaroArm Quantum M Max, 3.0 m, 7 axes - Bluetooth and Wi-Fi technology - Calibration kit - Mounting plate - iProbes (3 mm & 6 mm) - USB cable & power supply - Robust transport case - 1 rechargeable battery Additionally: - Magnetic Mount G3+ (150 mm) - iProbe adapter (M4 thread) - Software: Polyworks incl. IGES & STEP - "Complete Care" service plan valid for 5 years (maintenance, calibration & repairs) (4 years remaining) Iedpfx Ahow R Tk Nehetk Location: 32130 Enger, Germany If you are interested or have any questions, we look forward to hearing from you.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Faro Gage Plus measuring arm with 6 axes Measuring arm length: 4 ft (approx. 1.2 m) Accuracy: 5 + 8L/1000µm Includes measuring table, accessories, and matching transport case Includes operating instructions and manuals. Itodpfx Aheztylkjhok

Condition: ready for operation (used), Year of construction: 2015, A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible. Isdpfeztduiex Ahhetk

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable Ijdpfsvi Enasx Ahhstk blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Due to a project completion, we are selling our Hexagon Absolut Arm for 3D measurement, including accessories. Advantages of this measuring arm include: lightweight and mobile for high-precision measurements, no warm-up required, no encoder. Switch on, unlock, and start measuring immediately—even without trained measurement technicians! Probes and scanners can be changed during the measuring process without re-alignment. The measuring arm is robustly protected (IP54 certification). Itsdjxfqllspfx Ahhjk

Year of construction: 2004, operating hours: 8,000 h, condition: repair required (used), functionality: not functional, machine/vehicle number: GLCI000199, Granite base measuring 900 mm x 1500 mm with a thickness of 250 mm, featuring a gantry structure and Z-arm equipped with a Renishaw PH10MQ probe head and Renishaw PHC10-2 probe head controller. All listed components are functional and can operate independently. Currently, the machine is non-operational due to the absence of the B3C controller, which processes data from the machine and transfers it to a PC. All axis scales and the probe head are fully operational. The equipment only requires a retrofit of the controller to become functional. Last calibration according to ENAC standards was in February 2019. (E = 1.9+3L/1000). Unused since 2020. Removal and transport are at the buyer's expense unless otherwise agreed and are not included in the sale price. Itjdpfsyh H Dhox Ahhek

Condition: good (used), Year of construction: 1982, machine/vehicle number: 150607782, Measuring machine with manually operated measuring arm Table size: 3,000 x 1,500 x H - 360 mm - good surface Three-axis digital display Working height 700 mm - height-adjustable feet With extensive accessories – see photos Itsdpfxjx T A Uqo Ahhjk Weight approx. 4,500 kg PRICE ON REQUEST!

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 130304, GOM ATOS II Triple Scan - Industrial Blue Light Optical 3D Scanner {CEE ID: 7494} GOM Year: 2013 System includes lenses and calibration plates for the following measurement volume sizes: 320 mm 170 mm Travel roller cases for measuring head, lenses, accessories, and tools. Computer - Dual Xeon processor, 32 GB RAM, RAID hard drives Itodpfx Aheyfgn Dohok Metal-enclosed reinforced case for computer equipment. Installed software ATOS Professional v8, includes: GOMInspect V1.2.1 Online system manuals. Copy of original software on CD FOBA AROBE studio / camera stand - 12-foot height with 2M horizontal arm, rotating column, and tilting head. Printed manual, CD with test reports and calibration plate data for each calibration plate Rotary table (manual) Parts set (touch probe)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Isdpjzrd R Usfx Ahhetk Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: used, Year of construction: 2017, functionality: fully functional, turning length: 500 mm, turning diameter: 255 mm, spindle bore: 63 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, spindle motor power: 10,800 W, rotational speed (min.): 50 rpm, rotational speed (max.): 5,000 rpm, type of input current: AC, bar passage: 63 mm, bar diameter (max.): 51 mm, We are offering this used ACE Designers LT-2 XL 500 ELITE CNC lathe, model year 2017. Machine type: LT-2 XL 500 ELITE Machine number: 939 Year of manufacture: 2017 Supply voltage: 400/415 V AC Control voltage: 24 V DC Safety fuse: 63 A Rated current: 29 A Rated power: 21 kVA Conductor cross-section: 10 mm² The machine is in good condition, regularly maintained, and ready for operation. Basic specifications: Control system: Siemens SINUMERIK 828D Max. turning diameter: 255 mm Max. turning length: 500 mm Diameter through the spindle: 63 mm Max. bar diameter: 51 mm Spindle speed: 50 – 5000 rpm Spindle power: 10.8 kW Equipment: 12-position turret Iodpfx Ahjztpxyehstk programmable tailstock with rotating tip part catcher chip conveyor tool measuring arm 3D program simulation The machine is reliable and suitable for series or individual production. If you have any further questions or require more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2005, operating hours: 38,388 h, functionality: fully functional, machine/vehicle number: 019.3784, workpiece weight (max.): 130 kg, grinding length: 1,000 mm, total width: 1,970 mm, total length: 2,735 mm, total height: 1,700 mm, quill travel distance: 35 mm, quill stroke: 35 mm, quill diameter: 50 mm, distance between centers: 1,000 mm, type of input current: AC, spindle speed (max.): 2,110 rpm, spindle speed (min.): 1,670 rpm, grinding spindle speed: 2,110 rpm, overall weight: 3,400 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece spindle speed (max.): 1,000 rpm, STUDER S30-1, manufactured in 2005, machine no. 019.3784 – universal cylindrical grinding machine, hydraulically controlled, for between-centers grinding and external grinding. Well-maintained, original condition, no indication of damage or weld repairs. Included: Original operating manual from Fritz Studer AG (DE/EN/FR, including spare parts catalog and noise measurement report) and EC declaration of conformity, both issued for this machine number. According to this factory documentation, it is the version with a center distance of 1,000 mm. EQUIPMENT - Grinding spindle with external grinding wheel on the left, Ø 400 x 80 x Ø 127 mm, hydrodynamic plain bearings, mounting taper Ø 63 mm - Workpiece spindle, swiveling 0-90°, MK 5, collet chucks W-25, 30-1,000 min-1 continuously variable via frequency converter - Three-jaw chuck mounted, drive for between-centers grinding, centering point in the tailstock - Tailstock MK 3, quill stroke 35 mm, adjustable spindle pressure, fine adjustment for roundness ± 40 µm - Adjustable dressing device on the tailstock (dressing by hand; diamond is a wear part) - Digital display Sony LD10 on swivel arm - Hydraulic unit Wandfluh (CH), coolant supply with filtration and aerosol extraction - Machine bed made of mineral cast Granitan S103 - 8 grinding wheel mounting flanges, including one balancing flange IMPORTANT – WHAT IS NOT INCLUDED This machine does NOT have an internal grinding attachment, NO belt spindles, and NO in-process measuring control. The series is prepared for these at the factory, but none of them are installed on this machine; available as accessories from STUDER. Grinding wheels are also not included in the scope of delivery. We only describe what we can document photographically. Iedpfozu T Afsx Ahhjtk TECHNICAL DATA (according to the operating manual for this machine) - Center distance 1,000 mm, clamping length 1,030 mm, table stroke 1,050 mm - Max. workpiece weight between centers 130 kg, table swivels 8.5° - X: Rapid traverse 60 mm, plunge depth 3.4 mm in Ø, feed rate 0.012-6 mm/min, incremental feed from 0.001 mm - Z: 50-5,500 mm/min, smallest automatic table stroke 1.5 mm - Grinding spindle 1,670 / 2,110 min-1; machine's power rating: max. 35 m/s, wheel up to Ø 400 mm at 1,671 min-1, up to Ø 316 mm at 2,114 min-1 - Automatic hydraulic grinding cycle: rapid approach, feed 1 and 2, sparking 0-6 s, automatic shut-off - Guaranteed working accuracy (factory specification): straightness 0.0025 mm over 400 mm, 0.004 mm over 650 mm; roundness in external grinding 0.0003 mm - Operating hours 38,388.5 h; connection 400 V / 50 Hz, max. 13 kVA, air 5 bar; noise level ≤ 75 dB(A) - Weight approx. 3,500 kg (factory brochure, 1,000 mm version), footprint approx. 2,735 x 1,970 mm - Center height: will be remeasured and confirmed upon request CONDITIONS Location: 16727 Velten near Berlin. Machine packed on a wooden pallet, delivery 1-2 working days after payment receipt. FCA Velten (Incoterms 2020), loading onto your truck by our staff included. Payment: 100% advance payment. Inspection possible with short notice by appointment. Demonstration and test grinding only by appointment: the machine is disconnected, setup will be carried out by an external service provider; we will agree on the effort and costs in advance. Technical data according to manufacturer's documents and the included operating manual are provided as information; we will confirm individual values during the inspection or upon request. Offer subject to

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Ijdpfjzlpv Aox Ahhetk Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: excellent (used), FARO Prime 3D coordinate measuring arm Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 09/10/2013 Calibration date according to certification: 06/25/2015 Made in Switzerland Mobile 3D measuring arm for industrial metrology, quality assurance, component inspection, reverse engineering, tool and mold making, jig and fixture construction, and production control. Technical data Iedpozc Erpsfx Ahhstk Measuring range: approx. 1.8 m / 6 ft Axes: 6 Single Point Accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Revision: 28.1 Bluetooth wireless technology USB interface Integrated battery operation Temperature compensation Portable CMM measuring arm technology Compatible with multiple probe systems Weight measuring arm: approx. 9.3 kg Total weight incl. case and accessories: approx. 35 - 50 kg Equipment / Scope of delivery FARO Prime measuring arm Transport case HP EliteBook laptop Reference sphere / Calibration sphere Base plate / Mounting plate Measuring probes / Probe set Software data carrier USB dongle Operating instructions / Manuals Other accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very neat lathe with powered tools and sub spindle. Year of construction: 2004 Mazatrol 640T NEXUS control 500mm between chucks Max turning diameter: 380mm Iodoyx U Itspfx Ahhjtk 2x hydraulic Kitagawa chuck Measuring arm Powered tools with VDI40 adaptor (VDI tools are available at additional charge) C axis Sub spindle Everything is cleaned and ready to use! Machine weight about 5 tons Forklift available to load the machine! Price is excl. VAT This machine is under power to view in Genk!

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Ijdozbx N Eepfx Ahhjtk Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: good (used), Year of construction: 2012, machine/vehicle number: 158750, measuring range X-axis: 5,000 mm, measuring range Y-axis: 2,600 mm, measuring range Z-axis: 2,100 mm, Technical Data Manufacturer: Zeiss Model: Carmet II Duplex Serial No.: 158750; 157854 Year of manufacture: 2012 2 measuring arms Measuring plate Centrally installed grid/adapter plate Width: 2,600 mm Depth: 4,800 mm Platform installation Measuring range X-axis: 5,000 mm Y-axis: 2,600 mm Z-axis: 2,100 mm Accessories 2 control PCs (FTSD0026; FTSD0029) 4 x 24" monitors, make Eizo 2 keyboards 2 mice Price: on request! Itedpfx Ajxnrugjhhek Note: Our offer is addressed exclusively to professional customers. (Subject to changes and errors in technical data, information and pricing as well as prior sale!)

Year of construction: 2008, operating hours: 470 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Yxlon MU 2000, Yxlon MU 2000 type industrial X-ray screening equipment with 160 KV output: The system were totally refurbished in 2020. The flat panel and all of the axiscontrol electromotors were also replaced!!! The stained glass viewing window with a safety lock can be opened with two hands and the workpieces can be inserted without stopping the radiation! The workpieces can be moved using a five-axis manipulator. The movement can be programmed, which speeds up the work and makes the evaluation more accurate. However, it is also possible to move it manually for inspection! Size and weight of the workpieces: - Diameter: 400 mm Length: 900 mm Weight: 60 kg - Cabinet dimensions: 2200 x 2700 x 1800 mm - Weight: 4000 kg Isdpfxeu Hzvxe Ahhjtk - Computer control The machine automatically moves the inspection table and the tilt angle and height of the C-arm according to the program compiled on the basis of the parameters of the places to be tested, so that the number of testable pieces can be significantly increased in the case of serial tests. Several components can be loaded into the cabin at the same time, and the machine examines them one by one according according to the programming. MG 165 x-ray device Y.TU-160 D 06 metal-ceramic X-ray tube, for detecting small defects in steel or aluminum castings, parts - Focus size: 1.0/0.4 mm - Test voltage: 8-160 kV, 1.00/0.64 kW power - Closed system water cooling WL3002 - Translucent material thickness: steel 35 mm, / aluminum 45 mm XRD Flat Panel - 200 x 200 mm active area - 512 x 512/400 μm/30fps or 1024×1024 pixels/200μm/15fps resolution - Special frame grabber - Y.T24.CD01, 24″, 1920×1200 pixels, color TFT monitor - Load capacity: 160 kV Control panel - MGC 41 control panel - Manipulator control (joystick) - Door control, push buttons /two-handed/ - Image processing control - digital image processing software - Image archiving - Image captioning - Image comparison with a reference image - zoom function - blackout control - Fast video card + frame grabber + evaluation PC - Measurement and calibration functions - Windows operating system - DICONDE data format

Condition: excellent (used), Year of construction: 2014, total height: 1,100 mm, total width: 300 mm, total length: 300 mm, overall weight: 60 kg, Equipment: documentation/manual, type plate available, FARO measuring arm, 7 axes, laser head, various measuring probes, heavy stand base for mounting, in original case; includes CAM2 software with dongle, Laser Line Probe V3, and various documentation. Iedpfxoyq R R Ho Ahhetk

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station Ijdpfx Aoxqxt Iohhotk - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 95 kg, - Leasing options available!!! - Modular expandable basic contour measuring system, Z-axis measurement direction downwards Optional functions expandable via software update: - Up/Down measurement direction switch - Roughness measurement - QR code scanner (for probe arms and reference parts) - Data export to QS-Stat (dfq data) - Dominant waviness - Free commissioning and training within a 150 km radius - - Free software update for contour software Scope of delivery: - Complete mechanics with Y-axis adjustment table (17 mm travel) - Integrated controller Ijdpjzict Aofx Ahhjtk - PC W11/64-bit; 24" TFT flat screen - ConturoMatic software; operating manual - Dust cover, robust design, water-repellent Technical data: Measuring range X 250 mm Measuring range Z 320 mm Resolution 1 nm Measuring systems: optical incremental System accuracy +/- (0.9 µm + L/100) µm * [L = mm] Probe force control Measuring speed 0.1 - 3.0 mm/s, automatically optimized Positioning speed up to 25 mm/s Table load capacity 35 kg Precision guide on hard stone base Weight 95 kg

Condition: good (used), Year of construction: 2021, Universal Robots UR10 Cobot. For sale is a Universal Robots UR10 collaborative robot. IMPORTANT: Only the Universal Robots UR10, including the camera system and controller, is offered. The complete VisionTools system or a customer-specific software solution can be included for an additional charge. Technical data – Robot: Manufacturer: Universal Robots Model: UR10 (CB3) Year of manufacture: 2021 Iodpfx Ahszbz U Rohotk Serial number: 2021301600 Date of production: 09.09.2021 Robot type: Collaborative robot (Cobot) Axes: 6 Max. payload: 10 kg Max. reach: 1,300 mm Weight of robot arm: 28.9 kg Protection class – Robot arm: IP54 Functional safety: PLd according to ISO 13849-1 Controller: Universal Robots CB3 Controller Software version: UR Software 3.15.3 Application areas: • Bin picking • Quality control • Image processing • Machine loading • Pick & Place • Automation • Measurement and testing technology • Assembly processes Equipment: • Universal Robots UR10 Cobot • VisionTools industrial camera system • LED high-performance lighting • Control cabinet • Operating panel • Integrated safety functions • Mobile system base Condition: The system is in very good condition. Fully functional. Inspection possible while powered on, by appointment. We have two units in stock.

Condition: used, Year of construction: 2015, Faro Prime Measuring Arm Condition: Used Year of Manufacture: 2015 Features: - Temperature and overload sensors Iedpfx Ahoy Nl H Uohstk - Compatible with multiple measuring probes - Internal weight compensation - Wireless operation Advantages: - Repeatability accuracy starts at 0.016mm - Exclusive 6-axis version - Unrestricted rotational flexibility - Versatile, suitable for both production and metrology applications - Lightweight design thanks to new materials - Arm reach of 0.9 m, working volume of 1.8 m (6 ft), 6 axes, tactile arm - Includes calibration certificate, accessories, and