Used Megapoint Drill Grinder for sale (6,185)

Condition: excellent (used), CATALOG NUMBER 6608 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Max drilling depth: 60 mm - Vertical drilling width: 60 mm - Adjustable drilling (up/down and at an angle) - Right/left drill bits, mounted with hex screws - Pneumatic clamps: 2 pcs - Table surface dimensions: 490x1040 mm - Height to table surface: 920 mm - Main motor: 2.2 kW - Operating pressure: 6-8 bar - Dimensions (L/W/H): 2830/1150/1320 mm - Weight: 442 kg - German manufacture - Original DTR documentation - Unpainted - Mobile Net price: 7,900 PLN Hjdpsx Sq Amsfx Adwsfb Net price: 1,880 EUR (based on a rate of 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Hfodpfx Adox Uyzqjwob We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1999, Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine Hodpeyab Syofx Adwjfb -Manufacturer: CUOGHI AFFILATRICI, drill grinding machine type APE60 with point thinning device -Drill chuck: up to Ø 60 mm -Grinding discs: Ø 200 x 45 x 32 -Coolant system: present -Accessories: incl. tools (see photo) -Dimensions: 860/880/H1300 mm -Weight: 275 kg

Condition: used, Items as new or nearly new and used wood drills mainly in sizes 10, 13 and 26 mm. Remaining stock of a double-end profiler with drilling assemblies. Hfsdjx Tvbwepfx Adwsb

Condition: good (used), Year of construction: 2000, 6 bar pressure with insertion device for cup hinges with 5-hole row, 1.6 kW, 380 Volt. Includes 3 drills for cup hinges and foot switch. Hedex U Di Eepfx Adwsfb

Year of construction: 2000, condition: used, core boring STIHL number 2 Stück 1 Stück 4 Stück +++++ Hodpjx U A Ndefx Adwsfb Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 380V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). Hjdpfx Adox N I Syjwefb It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill drilling capacity in steel 12mm Drill chuck mounting B16 outer taper, spindle stroke: 40mm, throat: 200mm, column diameter: 50mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min./max. 110/250, feed by hand, machine height without options: 670mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in display, machine status indicators and warnings in display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, Hfodpfjlub Rdjx Adwob spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint finish: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: Hjdpfx Aex Rqk Usdwsfb - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle - new machine - CE certificate - solid - professional Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Condition: repair required (used), Year of construction: 2007, functionality: limited functionality, machine/vehicle number: 6043, total height: 2,151 mm, total length: 2,160 mm, total width: 2,160 mm, spindle speed (max.): 7,200 rpm, spindle speed (min.): 2,000 rpm, feed length X-axis: 320 mm, feed length Y-axis: 220 mm, feed length Z-axis: 180 mm, overall weight: 3,200 kg, Characteristic - Diameter range 0.1 - 16[mm] - X axis :320 [mm] - Y axis :220 [mm] - Z axis: 180 [mm] Resolution: 0.0001 [mm] Fast travel: 12 [m/min] Encoder Linear glass scale - A axis :195 to 30 (225) Resolution 0.00005[°] Encoder Rotary glass scale - B axis :-75 to 130[°] Resolution 0.0001[°] Encoder Rotary, on AC motor -C axis Stroke Tool rotation Resolution 0.001° Encoder Rotary, on AC motor - Grinding spindle Power 7 [kW] direct drive Rotation speed 2000 - 7200 [rpm] Grinding wheels Up to 8 wheels Max. 150 mm - CLAMPING Clamping collets W20 (option W15) Range 0.5 - 20 [mm] - Total power Maximum :18 [kW] Hfjdpfx Adsv S Uakowob - Dimensions :L x W x H 2160 x 1600 x 2151 [mm] - Weight 3200 kg In the set with the machine (included in the price) we also sell a balancer and Optima Trimos (tool setting device). These devices are fully functional. Additionally, at this price we can also throw in the profiler from the photos in the set. Interested parties are welcome to contact us.

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Hfedpfxexy Eyao Adwob Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: used, Year of construction: 1975, 1640 weight 280 kg ja +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Hjdjh H Eqnspfx Adwjfb Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Uchida GA-4W Four-Head Paper Drill This machine is in very good condition and ready for operation. Made in Japan. The machine has a number of features that make it easy to use, including: – four drilling heads with independently adjustable positions Hodpfjx N I Saox Adwefb – a sliding programming bar – spacers for easy setup for drilling holes Technical specifications: Drill diameter: 2-10 mm, Stack height: 50 mm, Head spacing: 65 mm – 330 mm Weight: 370 kg 380V power supply Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. Waste discharge is directed outwards. Front and side margins. Includes operating tools. New cutting stick, drill bits, and sharpener.

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 kg. - Speed infinitely variable 100-2000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black Hfjdpjlubw Ijfx Adwjb incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Hfjdpfx Adjx Rqk Ijweb Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Hfodjxt N Izepfx Adwob Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)

Condition: used, Year of construction: 2020, operating hours: 2,530 h, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20719 Specifications: Model year: 2020 Operating hours: approx. 2,530 Engine power: 129 kW Undercarriage: See photo Interchangeable jaws Includes one extra jaw for finer fractions Description:Arjes waste shredder, model year 2020, primarily used for processing wood and bark. Equipped with interchangeable jaws, and delivered with an additional jaw suitable for producing finer output fractions.Quick delivery available. Hodpjwrl U Refx Adwofb Hours: 2530 Own weight: 14500 Model: 2020 Arjes Impaktor 250 Avfallskvern

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Hsdpfx Ajx Sw Ipsdwofb Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Nagel Citoborma 480AB Paper Drill Hjdpsx N I H Rsfx Adwsfb This machine is in very good condition. It has four drilling heads. Technical specifications: Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: excellent (used), two speed with switch belt gear motor power 0,3kW CE year 2003 Hsdpfx Adonr Hk Tjwefb Connection 380V

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps Hfsdex Rqkhjpfx Adwob - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: new, BRAND NEW T-TYPE FLOOR BORING AND MILLING MACHINE HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 1,500 mm Y-axis (cross ram): 1,300 mm V-axis (column traverse): 1,000 mm Rotary Table (C-axis): 2,000 x 2,000 mm Max. table load capacity up to 15,000 kg Automatic universal 1° x 1° swivel head (optionally with fixed quill Ø 210 mm) Hfjdpfx Adoq I Nkbowjb Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS – internal coolant supply – 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Chain-type tool changer: 60 stations (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimeter guarding (open top) Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Hjdpfx Adjw Ucm Ujwjfb Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01

Condition: good (used), functionality: fully functional, 4-speed gearbox speeds from 180 to 2000 rpm motor power 0.75 kW drilling depth stop up/down adjustment vice available at extra cost Hjdpfx Ajvcb Ntodwofb

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder Hjdpfew Rag Dsx Adwofb L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.