Used Metacap Spray Gun for sale (2,987)

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Csdpfxewf Dh Ne Afpjgn Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Köhler Salt Spray Chamber Corrosion Chamber Köhler Salt Spray Chamber HKT 500 Operation via touch panel Inner dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Cjdpfx Aen Arqdefpjgn Test chamber volume 500 l Temperature range chamber room temp. up to 50°C Mains supply 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Cjdpfx Aevzz A Refpsgn Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Cgedpfow Strcox Afpsn Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machines Conveyor spray processing machines FAPC 3000 Cjdpfxsd R Trks Afpsgn The new FAPC have been developed to be used with the latest development, Etching and abating chemistry for the production of printed circuits, metal signs and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Process chamber 450mm Water rinsing chamber 280mm Spray rods - Top 4 process chamber, 1 rinsing chamber Spray rods - floor 4 process chamber, 1 rinsing chamber Nozzle type Poly v-jet - 1/4 revolution removable Nozzles per pipe 3 + 4 for process, 4 for rinsing Nozzles Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control Adjustable over the entire range from above and below. Conveyor speed control High torque. AC drive motor system, powered by a precision inverter with digital displays, for a precise operator reference Speed range 45 mm - 1.6 m / min Temperature range Ambient temperature up to 50°C -1°C Temperature Controller Digital Liquid level sensors For heating and pump Manual reset of overtemperature protection Voltage 220 / 240V 50Hz (13A plug) Dimensions: Height 670mm Depth 670 mm Length 1430mm including collecting bowl Type: FAPC 3000 Condition: used / used Scope of delivery: (See picture) (Changes and Ir

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Cgodpfxewc Nvgo Afpon Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Salt spray chambers: diverse testing possibilities from salt spray test to fully automatic alternating test easy operation by graphical menu guidance customized versions for many applications easy operation via touch panel internal dimensions W x D x H (without hood) 1080 x 675 x 580 mm external dimensions W x D x H 1940 x 900 x 1220 mm Test chamber capacity 500 liters Chamber temperature Rt +5 - 60°C Humidifier temperature Rt +5 - 75°C Mains connection 230V 1P 50/60Hz 2000W Compressed air 4,5 - 8.0 bar / 3Nm³/h Brine supply 140 liters Stainless steel version Refurbished and converted to Comfort control - Renewal of all electrical components - Renewal of all hose connections Type: HK 500 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Cedsnr Hi Sopfx Afpogn Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch riveter operating voltage: 400V 50 Hz rated current: 12A Main fuse: 35 A control voltage: 24 V signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 279 kg year of manufacture: 2012 Type: 9524-640-824-5 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) Cgedpfjpfcx Sjx Afpon (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 Cgodpjwit Erjfx Afpen This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Csdpst Igc Sjfx Afpegn Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Here we offer you RIVSET self-pierce rivet system. with punch rivet pliers 9524-640-826-7 operating voltage: 400V 50 Hz rated current: 13A Cgjdpfx Aepgulaefpon Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V year of manufacture: 2011 max. permissible rivet setting pressure: 250 bar max. permissible rivet setting force: 78 kN weight of the tongs: approx. 195 kg type: 9524-640-826-7 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Ytterbium Fiber Laser. The laser welding gun LSS5 M completes the series as a compact welding tool. With laser powers of one to four kilowatts, integrated cooling technology and convenient control unit this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet pairings or aluminium. Cgjdpehh H Rmsfx Afpjn Trifocal technology 3500W laser gun Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 - 600 Power requirement 3500 W laser power Laser Duty Cycle 30% (with cooler) 3.5 kW Dimensions, controllerW × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser welding gun LSS-5M-3500-3F Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Cgodpfxsxg Hrks Afpon Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Cgodpfoxvivqex Afpen Technical data: see photos Location: ex-site Saarland

Condition: good (used), Paint module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC Cjdpeb A Rk Tefx Afpogn Price: per piece Quantity: 2 available -Weight: 0.8 kg

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump Cgjdpfx Aod Hbp Ejfpen - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, MSP – Manual Hand Spray Systems Codjh E Szmepfx Afpjgn The MSP range of manual hand operated washing systems are made entirely from high quality stainless steel 304 and can be supplied high-pressure ump option achieving pressures of up to 60 bar. Thanks to a specially designed heavy-duty washing chamber the MSP range washes parts within a closed sealed envireonment ensuring the surrounding workplaces is kept clean, tidy and dry from pressurised water. The MSP range is enviromentally friendly by utilising alkaline aqueous biodegradable detergents and allows for effective energy consumption using a foot pedal operation that oprates the pump only when pressed. This makes the MSP a very capability unit and a must have for any workshop enviroments cleaning heavy soiled contaminants.

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: Cedpfehbyr Sjx Afpsgn a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: A1406010, feed length X-axis: 1,800 mm, feed length Y-axis: 350 mm, feed length Z-axis: 150 mm, feed rate X-axis: 40 m/min, workpiece weight (max.): 8 kg, working width: 200 mm, volume flow: 16,000 m³/h, control cabinet length: 3,200 mm, control cabinet width: 600 mm, type of input current: three-phase, control cabinet height: 2,200 mm, total height: 3,600 mm, total length: 21,000 mm, total width: 14,000 mm, Complete lacquering line for narrow elements. Magazine infeeder / brushing machine left; right; top / lacquering cabin / drying tunnel hot air; cold air; UV lamps / outfeeder. Line speed 40 m/min Production speed 25 m/min Spraying thickness 110 g/m² Waterborne lacquer Power 200 kW Cgsdpox Nhawsfx Afpon

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: IMBDS63-52-10-45-2/SP/DC/SB, workpiece weight (max.): 120 kg, working height: 2,850 mm, power: 35 kW (47.59 HP), air demand: 24,000 m³/h, compressed air connection: 6 bar, The existing window coating line was in full operation until December 19, 2025. The system is currently still connected to the electrical supply network but will be replaced by a new robotic coating system over the turn of the year. The objective is to find a suitable subsequent user who will professionally dismantle and remove the complete system on their own responsibility at the beginning of the coming year. Cgsdex Npzcspfx Afpjn System Concept Description Loading and unloading of traverses with window frames and sashes takes place via a lifting/lowering station, which allows for ergonomic and process-safe feeding of the system. Impregnation and priming of the workpieces is carried out in a vertical flooding booth. The coating application is performed using the flooding process via vertically arranged coating nozzles. This is followed by a drip-off and drying zone, where the traverses are guided in an inclined position. The first drying tunnel has a buffer capacity of approx. 40 traverses. Drying is achieved by means of warm air generated from a hot water system with a supply temperature of approx. 85°C. A switching unit enables workpieces to be routed either to a second impregnation/priming stage or directly to the subsequent coating section, as required. The coating section consists of a lifting stand with integrated electrostatic application (E-Statik). Coating is performed on one side only, supplemented by an automated turning unit, allowing workpieces to be returned to the spray system for a repeat coating pass. The second drying tunnel enables buffering of approx. 50 traverses. Here as well, drying is by warm air supplied by a hot water system at approx. 85°C. A buffer section after the second drying tunnel with a capacity of about 25 traverses serves as a transfer area to the unloading station.

Condition: excellent (used), functionality: fully functional, throat depth: 160 mm, type of cooling: water, Equipment: documentation/manual, Hand-operated, water-cooled spot-welding gun Make DALEX type 3116 Connection 400 V 50 Hz Rated power at 50 % duty cycle: 6.35 kVA Sec. short-circuit current: 8.3 kA Electrode force: 180 daN Cedpfx Aor Iynfofpsgn Arm spacing: 120 mm with 5 m connection cable with control cable with asynchronous welding control RA (RB 11) 8 step switches for power control Current time: 2-100 per little used from school operation

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 Cedpov I Akvsfx Afpegn - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm Cjdswty H Djpfx Afpegn If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Cedpfjx Iggyox Afpogn Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Csdpfxexzprcj Afpjgn Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.