Used Microwave Furnace for sale (874)

Condition: used, Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, the following is included: - Hardening furnace (vacuum oil quenching furnace) Ijdpfx Adewlvhhjwsht - Control cabinet for hardening furnace - Internal water tank with pump units and control box - Control box for water cooling - Internal nitrogen pressure vessel - External platform for cooling unit + connection points for nitrogen batteries (nitrogen battery containers not included, must be rented) - 7 hardening baskets - Red transport and loading trolley - Parts washing tank for complete baskets with compressed air and drip tray -> System has approx. 6,000 operating hours -> The pictures are up-to-date, only the date on the images is not correct

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) Ihjdpfx Aed Tx A Ejdwst immediately available from stock

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Ihedpfoxdantex Adwot

Condition: good (used), Year of construction: 2002, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Ihsdewg Hlajpfx Adwjt Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Isdpfsu A Tf Djx Adwjht Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Ihedpfjwkiipox Adwjt

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Ihodpfexcybksx Adwot Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP Ihsdpfx Aoxc D E Hodwst plasma generator: MAG-Puls was newly acquired in 2008

Condition: excellent (used), Panasonic NE1880 Microwave Stainless Panasonic pro II microwave, programmable controls, clear digital display, 16 programmes, capacity 44l, 1800W, 1Ph (11 in stock) Ihedpfx Adeix Iumjwjt

Condition: ready for operation (used), Heraeus MR 260 annealing furnace Internal dimensions: 260mm x 500mm x 160mm ( W x D x H ) Space requirement: 1100mm x 700mm x 1560mm ( L x W x H ) Weight: 150 kg Nominal temperature : 1000°C Ihedsrm R Eyepfx Adwet You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: Seriennr.: 4046, Equipment: documentation/manual, Ingot casting belt 600 Ihjdju S N Ahepfx Adwjt Zinc melting furnace ZSO 600 / 700 B

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Iedevxvgrepfx Adwsht

Year of construction: 1994, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 110 mm high Electrical connection values: 3 x 400 volts, 50 hertz Ihedpfov Ipcxjx Adwjt Heating: electric, heating coils, semiconductor relay "on/off", 100 kW, capacity: approx. 200 kg / h Working temperature: max. 1100° C Heating zones: 6 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 450 mm Cooling zones: cooling zone 1 approx. 1.4 m, cooling zone 2 approx. 3.0 m, cooling zone 3 approx. 4.5 m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: nitrogen N2, hydrogen H2 Dimensions: heated length (6 zones) approx. 3500 mm, furnace length approx. 4600 mm, feed table approx. 5280 mm, removal table approx. 1500 mm, total width approx. 1800 mm, total height approx. 2100 mm, total length approx. 23 m No gas table included.

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: Ihodoclupdspfx Adwet three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Ihsdetxb Avepfx Adwjt

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 700 mm wide, 230 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 160 kW Isdpsv Imhxsfx Adweht Heating: electric, heating coils, semiconductor relay "on/off" Working temperature: max. 1130° C Heating zones: 4 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 700 mm Belt speed: adjustable from approx. 50-800 mm / minute Cooling zones: cooling zone 1 as a wear part with insulation; 8mm base plate reinforced with beads, double-walled construction, length approx. 1.5 m, cooling zone 3 + 4 as double-walled convection cooling section Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle Protective gas: Exogas, Endexo retorts with insulating flange installed in the furnace Dimensions: Working height approx. 1000 mm, heated length (4 zones) approx. 3750 mm, furnace length approx. 6000 mm, feed table approx. 1200 mm, total length approx. 20 m Furnace is available twice (built in 2008 and 2013)

Year of construction: 2016, condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C Ijdpfxocdixlo Adwjht circulation fan: 4,0 kW loading weight: 3.000 kg gross

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Ihedpfjtxb Apsx Adwst

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 140 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 185 kVA Heating: electric, heating coils, thyristor control "on/off", heating output approx. 174 kW, output > 400 kg br. Working temperature: max. 1150° C Heating zones: 6 Belt construction: Mesh belt made of high-heat-resistant steel, width approx. 450 mm Ihedpfx Adev Igcpowet Belt speed: Adjustable from approx. 100-900 mm / minute Heating muffle: Heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 4m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: Nitrogen N2, Hydrogen H2 Dimensions: Working height approx. 1060 mm, heated length (6 zones) approx. 5800 mm, furnace length approx. 6600 mm, feed table approx. 10000 mm, removal table approx. 2000 mm, total width approx. 1900 mm, total length approx. 38 m, total height approx. 2100 mm

Condition: used, El. heated pit furnace, make Borel type: 6-72 temperature: max. 1050°C connected load: 90 kW clear ø: 850 mm clear height: approx. 2150 mm Ihodpjvv Tk Asfx Adwet without lid and control cabinet

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Ihodpfxstndwus Adwot

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Ijdpfxsv Ifzqo Adwsht Working space: 600 mm wide, 200 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 300 kVA Heating: 10 pcs. Recuperator burner, make WS, connected load 400 kW gross Working temperature: max. 1150° C Heating zones: 5 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 600 mm Belt speed: adjustable from approx. 100-900 mm / minute Heating muffle: heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1.5 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 3.0m Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle, base plate 8mm thick Protective gas: nitrogen N2, hydrogen H2 Dimensions: working height approx. 1060 mm, heated length (5 zones) approx. 6000 mm, furnace length approx. 6900 mm, loading table approx. 1500 mm, unloading table approx. 1500 mm, total width approx. 2900 mm, total length approx. 30 m The system is available twice (built in 2008 and 2015)

Year of construction: 2008, condition: ready for operation (used), A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible. Iodewmdvvjpfx Adwoht

Year of construction: 2010, condition: ready for operation (used), A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025. Ihsdpfx Adew Igvtowst

Year of construction: 1999, condition: ready for operation (used), Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025. Isdpew Emyzefx Adwsht