Used Mikron 79 for sale (192)

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Kedpfoxcxz Nox Aanonf

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Knjdpfxot Hw D Ro Aanef Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: good (used), Year of construction: 1995, Machine is in good working condition. Kodpfx Asuzimnjanonf Control unit TNC 426

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested ! Knjdpfei El Iaex Aanef

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg Kodpfxorywgze Aanonf

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Knedowm I N Hspfx Aansf Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Detailed technical data as per appendix - Machine can be inspected under power. Conversion - INSTALLATION - Setup - Application can be offered. Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Knedpfxet I T N Eo Aanof Payment: As is customary for used machines, net before removal.

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm Knedpju U Sabjfx Aanef z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: good (used), Year of construction: 1999, Machine is in good condition. Knodswx Rafspfx Aanjf X 750 mm Y 400 mm Z 500 mm 10.000 rpm

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, Kodpfetqqplox Aansnf solid table, coolant

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch Knjdercnm Nspfx Aansf -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm Knodst Hwxbspfx Aanjf max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2015, Machine is in good condition, parts shown by hand not come. X 1025 mm Y 560 mm Z 600 mm Ksdpfewx N Nfex Aanenf Heidenhain TNC 620, 16.000 rpm HSK 63

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Knjdpjtz Sqhefx Aanef Accessories: various tool holders, probe RENISHAW OMP 60, coolant

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg Ksdpsrc Ilgsfx Aanjnf

Condition: good (used), Parts on table not come. Marked with red. Knjdpfx Aowxdyxeanof

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, electronic module printed circuit board for operating unit. TCD22 -Type: WW TCD 22 . 104.73.20.041 Knsdpfx Ask Aua Noanjf -Dimensions cardboard: 410/310/H65 mm -Weight: 0.6 kg

Condition: good (used), Year of construction: 2007, Machine is in good condition, Knsdpfx Aaewk Nm Ionsf Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT Kedpfx Aaekzpm Hjnsnf -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Kedpfjm Dtnrex Aanonf Pallete changer EROWA not come.

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA Kedskyy Uqjpfx Aanjnf -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit Kjdporcnmwefx Aanonf -Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/240/H160 mm -Weight: 5.3 kg

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm Knodpfefbma Nox Aanef -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine Ksdpfjrb E E Njx Aanenf -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos Kodpfxjkvrqis Aanonf -Dimensions: 870/140/H130 mm -Weight: 18kg