Used Mikron Ume 600 for sale (177)

Condition: ready for operation (used), Year of construction: 1998, A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible. Blodezf Nciepfx Abtel

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Bedjw A Af Iepfx Abtoll Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Bedpfx Ajzmrpuobtoll Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Condition: used, EQUIPMENT - With automaton Zellio SR3 type - Tilting loader no. 11 and vibratory bowl Bsdjuhbqpopfx Abtoll - part diameter 2.50 to 12.5 [mm] - part length 0.30 to 30 [mm]

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Bjdpfx Aeuhbxaobtsll EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: Serien-Nr.: 107.84.00.188,, CNC machining center, manufacturer: Mikron, type: HSM 400, year of manufacture: 2005 Serial number: 107.84.00.188, travel ranges (x/y/z axis): 400x450x350 mm, tool interface: HSK40E, max. spindle speed: 30,000 rpm, spindle drive: 13 kW, recorded operating/load hours: 44,899/32,369 (13,350 spindle hours since replacement) CNC control system HEIDENHAIN iTNC530 Pallet table PPC 320x320 mm, 7-position pallet changer, 68-position tool changer, 1 Bedjzdtacopfx Abtjll Coolant unit BURN, 1 extraction system KELLER L-Cut year of manufacture: 2012, Setup probe PS 32 (WITHOUT any further accessories) The price includes dismantling, transport, and loading onto your truck!

Condition: used, Year of construction: 1997, total height: 2,900 mm, total length: 4,000 mm, total width: 2,400 mm, Colour: White Empty weight: 10.000 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Heidenhain - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 - Z-axis travel [mm]: 750 - Table length [mm]: 1150 - Table width [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 - Options: Tool measurement system - Transport dimensions: 4000mm x 2400mm x 2900mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Blodpfjy Uwawox Abtel

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with a 3-axis Elesta-Visulesta digital display. Fixed angular table, SK 40 spindle mount. In very good, operational condition, from an institute. The machine can be demonstrated under power by arrangement. Blodpfeg Nw Rzjx Abtol

Condition: used, Year of construction: 1982, x-travel 400 mm Blsdpfeu U Sabox Abtsl y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t Bjdpfx Aet Hwxbjbtjll dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Bedpfjt Hw D Rjx Abtoll Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Bljdpfx Absyzt A Uetel Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, Bljdpfozm Ticox Abtjl swarf conveyor, through spindle coolant,

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC426, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bedpfjzi D Rcex Abtjll Travel range, X-axis: 1,000 mm Travel range, Y-axis: 750 mm Travel range, Z-axis: 750 mm Table size: 1,150 x 700 mm Tool shank: SK40 Spindle speed range: 12,000 rpm MACHINE DETAILS Control system: Heidenhain TNC426 Machine weight approx.: 10,500 kg EQUIPMENT 30-position tool changer Electronic handwheel Chip conveyor Coolant system

Condition: ready for operation (used), Selling a well-maintained Mikron VC 1000 milling machine due to the purchase of a new machine. Bedpjh Tnpxofx Abtoll

Condition: good (used), Year of construction: 1980, Mikron WF2 milling machine with a 3-axis Heidenhain digital display. Fixed angular table, SK 40 spindle mount. In good, operational condition, from a precision engineering workshop. Machine can be demonstrated under power by arrangement. Bljdpfxjzq R Ahs Abtel

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Bjdpozkry Ijfx Abtoll Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1985, x-travel 710 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 155 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,20 x 2,30 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, Bodpfozip Hiex Abtoll solid table, electron. handwheel, coolant

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 Bjdpfx Absprb Dvjtjll -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z Bledekxhpuspfx Abtjl -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V -Secondary: 3x95/165 V Bjdpfx Aokyy Uqjbtjll -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 Blodpfskzpngsx Abtsl -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm Blsdpfx Aowd N S Dsbtel -Weight: 24 kg

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Transformer: from CNC machining center Mikron VC500D -Type: PTNo.. PTC 2500/139 Bljdpfjy Tv S Aox Abtsl -Power: 1200 VA -Dimensions: 215/210/H255 mm -Weight: 30.2 kg

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 Bodpfxorcnm No Abtoll -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm -Weight: 1.5 kg