Used Mill Line for sale (19,455)

Condition: good (used), Year of construction: 1960, Make: Bäuerle, including integral fence and HolzHer power feed Model: SFM 2 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole-changeable 6 speed settings: 1,800 - 4,500 - 5,600 - 6,000 - 9,000 - 12,000 rpm Forward/reverse rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space approx. 1200 x 1200 x 1300 mm Tedpfx Aey E T Ufeirjd Weight approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery in current condition as inspected, function-tested without overhaul, without warranty or guarantee

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 5 rows Stator blades: 2 rows Infeed cross-section: approx. 2 pieces, 10 x 120 mm Drive motor: 11 kW Tjdjz N Iymjpfx Airsd Mechanical infeed device for film edge strips

Condition: used, functionality: fully functional, Dubus multi-spindle drilling machine. Tsdpfx Aioz Irn Rorjd Full specifications coming soon.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. This compact table-top machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed in via a pair of infeed rollers and then granulated by a fixed counter-blade and a rotating impact blade. The infeed and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter-blade can be precisely adjusted. The desired speed can be regulated on the control panel. Technical data: Tsdpfoz Rmvvox Aired Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of manufacture: 2009 Machine number: 9310 31 09 Connected power: 0.5 kW Electrical connection: 230 V / 50 Hz Rated current according to nameplate: 6 A Dimensions: approx. 290 × 500 × 540 mm Weight: approx. 50 kg Equipment and features: Pair of infeed rollers Guide piece Fixed counter-blade Rotating impact blade Adjustable infeed speed Transparent protective cover Main and safety switch Compact design as a table-top machine Inspection possible by prior arrangement.

Condition: good (used), Year of construction: 1992, Table surface area: 1850 x 710 mm Permissible table load: 3000 kg Travel ranges: Longitudinal, automatic (X): 1600 mm Lateral, automatic (Y): 710 mm Vertical, automatic (Z): 850 mm Spindle mounting: SK 50 Speed range: 20 - 2500 RPM Main motor power, AC: 15 kW Transport dimensions L x W x H: 3650 x 2300 x 2700 mm Weight: 9400 kg Accessories / Special features: • CNC path control system, manufacturer HEIDENHAIN, model TNC 360 with 3 scales • Programming language "Plain text dialog" and DIN-ISO • Electronic handwheel HEIDENHAIN HR 330 with magnetic holder • 3D probing system HEIDENHAIN TS 120 • Main spindle compact unit RAC 3 • Control system prepared for 4th axis • Universal milling head system "HURON" with 2 levels, gears run in an oil bath • Hydraulic tool clamping • Coolant system • Central lubrication with interval • German electrical system, drives INDRAMAT • Operator control panel • Operating manual - Newly refurbished milling head, partially overhauled with new gears, seals and bearings Tedpjttamkjfx Airjd - Oil dispenser for central lubrication renewed Operating hours: 10,032 Program runs: 3,288 Spindle ON: 2,569 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: X-axis: 400 mm Y-axis: 350 mm Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Tsdpfx Aisupiypsrsd Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Tjdpfx Aisdbny Eorod Max. speed: 1,800 rpm Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2006, Milling spindle unit SEMA SE 100, e.g. for the production of crankshafts Spindle mounting: flange Speed with this gearbox: 97 rpm Spindle designed for up to 3000 rpm Drive power, currently: 22 kW The milling spindle is designed for up to 25 kW Bearing diameter: 110 mm Tjdpfsddzi Aox Aired Disc cutter SANDVIK Ø 700 x 25 mm Plunge depth of the disc cutter: 235 mm Accessories / Special features: - Disc cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings - Robust construction with hardened and ground spindle - High precision - 2-fold bearing of the spindle with 5 spindle bearings - WZ clamping via flange Original new price at the time: approx. €34,500.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, 1 brand-new universal milling head system "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Todpfezdbxbsx Aired Accessories / Special features: • 2 swivel plane system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling machines or panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" with hydraulic tool clamping Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mount DIN 69871 ISO 50 Overhang 358 mm Max. speed range 3000 rpm Max. drive power 22 kW Mounting flange: Outer diameter Ø 306 mm Dimensions L x W x H 460 x 306 x 360 mm Weight approx. 150 kg Accessories / Special features: • 2 pivoting axis system "HURON" • Hydraulic tool clamping • For retrofitting to conventional, NC or CNC milling and panel milling machines or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) Delivery time: approx. 2 weeks after order receipt The following work will be carried out during the partial overhaul: - 1 new gear pair - 1 new gear shaft - New bearings for the milling spindle and the gear shafts - New seals for the milling spindle and hydraulic tool clamping Tsdpez Adz Iefx Airsd - New paint job The image is similar and shows a milling head that has already been overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: excellent (used), Diameter Ø 700 x 25 mm Tedpfx Aiowz Nbmsrsd Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), 1 used, very well-maintained horizontal boring and milling machine / table drilling machine with point-to-point and contour control HEIDENHAIN TNC 145 and facing head Manufacturer: WMW UNION, Origin Germany Model: BFT 130/7-TNC 145 Year of manufacture: 1984 Technical data: Spindle diameter: 130 mm Spindle shank: SK 50 Table surface: 2000 x 1800 mm Travel: X-axis, transverse 2785 mm Y-axis, vertical 2520 mm Z-axis, longitudinal 2345 mm W-axis, quill 900 mm B-axis, table 360° Table load: 8000 kg Speed range: 5-1000 rpm Facing head speed: 5-2500 rpm Feed force X/Y/Z: 20000/20000/25000 N Feed rate X/Y/Z: 5-2500/5-2500/2-2500 mm/min Rapid traverse X/Y/Z: 5/5/3.15 m/min Total connected power: 100 kVA Total power consumption: 70 kW Footprint L x W x H: approx. 8.40 x 5.9 x 5.5 m Weight: 35,300 kg Accessories / Special features: • Point-to-point and contour control HEIDENHAIN TNC 145 • Spindle Ø 130 mm with SK 50 with motorized tool clamping • Facing head • Feed and rapid traverse • Lateral table supports R + L with hardened guides • Coolant system • Guide rail telescope covers • Swiveling control panel • Separate control cabinet and hydraulic unit TOP condition! Siegfried Volz Werkzeugmaschinen Tsdpsz Euuzefx Airjd Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Tsdpsxpfkkofx Airjd Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Tjdpeztxndsfx Airjd Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm range of revolution per miute: 60 - 4.200 U/min feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 spindle head swivable left - right: 90 ° Todpfx Aieva Evferod weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. *

Condition: used, Year of construction: 1975, Technical details: x-travel: 300 mm y-travel: 350 mm z-travel: 350 mm quill stroke vertical: 60 revolution per minute: 40 - 2000 U/min feed:: 12,5 - 500 / 18 step mm/min. tool taper: SK 40 headstock adjustment: schwenkbar 90° rechts/links mm headstock adjustment: Y-Weg: 175 mm table surface area: 600 x 285 mm distance spindle nose and table: min./max.: 50 / 400 mm distance spindle center to column: min./max.: 170 7 345 mm total power requirement: 1,6 kW weight of the machine ca.: 0,8 t dimension machine xH: 1,4 x 1,1 x 1,7 m Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display Heidenhain Coolant system Todpfxeu T Nave Airjd *

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 110 mm x-travel: 1985 mm y-travel: Spindelstock vert. 1270 mm z-travel: Tisch längs: 1260 m. Setzstock/1490 m. Setzstock mm table adjustment: nein ° B-axis (table): 360 W-axis (spindle longitudinal): axial: 710 mm U-axis: Planschieber radial: 250 mm control for program: Heidenhain 320 tool taper: ISO 50 table-size: 1600 x 1400 mm table rotating: 360 ° table load: 6,3 t range drill spindle revolution per minute: 6,3 ... 1250 / 4 step U/min revolution per minute: Plansupport: 6,3 ... 315 / 2 step U/min feed steps: Tisch: 5...2500 und Spindelstock vert. 5...2500 mm/min total power requirement: ca. 90 kW weight of the machine ca.: 30 t Tailstock Tsdju Utwbopfx Airsd Facing slide 700 Electronic handwheel max. turning Ø for drilling: 630mm max. turning Ø for facing: 1250mm At the moment the Horizontal Boring and Milling Machine has an electrical fault in the control (unknown). Our offer/sale is as described and as is! *

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min Tedpfju U E T Isx Airjd quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm Todju N E Abopfx Airod *

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW Tjdpfx Aiou Sq Emorod weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture *

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Todpfovc Avhex Aired Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice *

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Todpfxsu Id H Ae Aired Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions Tedeu Nc Hkjpfx Airjd *

Condition: used, Year of construction: 1978, Technical details: x-travel: 1200 mm y-travel: 500 mm z-travel: 650 mm w-axis: 90° rechts/links table-size: 1600x500 mm revolution per minute: 24 - 1600 / 12 step U/min tool taper: SK 50 distance spindle nose and table: min/max: 150/800 mm distance spindle center to column: min/max: 200/800 mm table surface area: 1200 x 520 mm total power requirement: ca. 25 kW Tsdpfx Aiju Nc Rvjrod weight of the machine ca.: 5600 kg dimension machine xH: 2,4 x 3,0 x 2,4 m dimensions electric cabinet LxWxH: 1,1 x 0,5 x 1,8 m Further technical specifications: - horizontal spindle: rpm 25 - 1200 with 12 level, taper SK50 - controlled via control panel - incl. coolant device - equipped with measuring system manufacturer Millvision *

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump Tedpfx Aiju Nc Twsrod - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *