Used Milling Machine for sale (66,159)

Condition: used, MAHO MH 600 P Tool Milling Machine Tool milling machine: MAHO Type/Model: MH 600 P Control: Heidenhain TC 135 Condition: Used Technical data Travel distances (X / Y / Z): 500 mm / 400 mm / 400 mm Quill stroke: 80 mm Table dimensions: 720 mm x 140 mm Max. table load: approx. 500 kg T-slots: 8 pieces (distance 54 mm) Tool holder: SK 40 / ISO 40 Laodpfxezxgwdo Apdsg Spindle speed range: 40 to 2,000 rpm Spindle drive power: 4.0 kW Working feed rate continuously adjustable: 5 to 500 mm/min Rapid traverse speed (X / Z): approx. 1.2 m/min Rapid traverse speed (Y): approx. 0.8 m/min Connection voltage: 380 V / 50 Hz Machine weight: approx. 1,450 - 1,900 kg Space requirement (L x W x H): approx. 1.8 m x 1.5 m x 1.9 m Inquiry item: Transportation costs will be provided in a separate, customized offer.

Condition: used, MAHO MH 600 P Tool Milling Machine Tool Milling Machine MAHO Type/Model MH 600 P Laedpfx Apszxhfvsdeg Control Heidenhain TC 135 Condition Used Technical Data Travel (X / Y / Z): 500 mm / 400 mm / 400 mm Quill stroke: 80 mm Table dimensions: 720 mm x 140 mm Max. table load: approx. 500 kg T-slots: 8 pieces (spacing 54 mm) Tool holder: SK 40 / ISO 40 Spindle speed range: 40 to 2,000 rpm Spindle drive power: 4.0 kW Working feed rate continuously adjustable: 5 to 500 mm/min Rapid traverse speed (X / Z): approx. 1.2 m/min Rapid traverse speed (Y): approx. 0.8 m/min Connection voltage: 380 V / 50 Hz Machine weight: approx. 1,450 - 1,900 kg Space requirement (L x W x H): approx. 1.8 m x 1.5 m x 1.9 m

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Lodpfxowhd Afs Apdjag Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Lajdoxtnn Tspfx Apdsg Weight, approx.: 1900 kg

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Milling head swivels: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Ljdoyi E Udepfx Apdoag Weight, approx.: 1200 kg Equipment: - Digital readout - Machine lamp - Coolant device - Machine feet

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light Ledpspxmlqjfx Apdeag - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: new, Universal tool milling machine according to DIN 8615. The torsion-resistant machine stand made of MEEHANITE® quality casting and the high-precision, hardened and ground guides in all axes guarantee high precision and durability. With the 3-axis digital display, all values can be called up directly and with the user-friendly control panel on the jib arm (OPTION), it can be positioned individually. Clamping area of the fixed angle table: 900 x 500 mm Max. Workpiece weight: 360 kg Horizontal and vertical tool holder: ISO 40 Main spindle motor power / 100% ED: 3.75 kW Power feed motors X/Y/Z-axis: 1.0 / 1.0 / 1.5 kW Total connected load: 7.4 kVA Speed range: 40 - 3800 1/min Speed steps: 18 Manual drill sleeve stroke: 120 mm Swivel range: +/- 90 Travel X (automatic/manual): 600 mm Travel Y (automatic/manual): 460 mm Z travel (automatic/manual): 380 mm Ljdpfx Asuxt N Ijpdsag Feed range, infinitely variable X/Y/Z: 10 - 650 mm/min Rapid traverse: 1000 mm/min Dimensions LxWxH, approx.: 1850 x 1650 x 1900 mm Weight, approx.: 1780 kg Equipment: - 3-axis digital display (e.g. FAGOR® Innova), with various comfort functions, on user-friendly swivel arm (OPTION) - DC servo motors for all X/Y/Z axes, e.g. from DELTA® - Spindle concentricity max. 0.005 mm, incl. test report to DIN 8615 (SKF®/NSK® roller bearings) - Spring-loaded safety handwheels in all axes, e.g. from GANTHER® - Torsion-free machine bed made of MEEHANITE® quality casting - High-precision, hardened and ground guideways in all axes with TURCITE®-B coating - Backlash-free HIWIN® precision ball screws in all axes - Electrical overload protection in all axes - Multi-adjustable spindle protection device secured via micro limit switch - Automatic interval central lubrication - Drilling quill - Swivel-mounted control panel on extension arm (approx. 1,600 mm) (OPTION) - Hydraulic tool clamping - SIEMENS®, BALLUFF® electrical equipment - Coolant device - Horizontal device - LED machine light - Spacious chip collection tray - Test report according to DIN 8615 - Operating tool - Operating instructions, spare parts list, incl. electrical circuit diagrams etc. in German - CE

Condition: new, Special offer price for in-stock items! Only while supplies last! Price net from warehouse, free loading. The machine does not include a base. The BF3 Deluxe base is available separately under article number 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Maximum cutter head milling: 80 mm Overhang: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MK 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Tilting milling head: -90° to +90° Distance spindle / table: 60 - 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Weight approx.: 287 kg * without base Features: - Simple and quick speed change via gear selector switch - Versatile applications such as drilling, milling, threading, etc. - High smoothness due to ground gears running in an oil bath - Right and left-hand operation for threading - Quill adjustment via handle, fine adjustment via handwheel - Dovetail guide for x, y and z axes, adjustable via wedge strips - Tilting milling head on both sides for angle drilling, milling chamfers, etc. - Solid, large cross table, precisely surface-treated - Optimal price-performance ratio for the cost-conscious user Lasdpfjdh Hbcox Apdsg Scope of delivery: Quick-change drill chuck 3 - 16 mm / B 16 Drill chuck arbor MK 4 / B 16 Draw spindle M 16 Reducing sleeve MK 4 / 3 Combination milling arbor MK 4 / 27 mm Height-adjustable guard Threading device LED machine light Digital quill stroke display Slotted guard Longitudinal measuring scale Operating tool

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometrical overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 min-1 Feed rates: (18) 8 - 400 mm/min Head swiveling: 180° Equipment: - Geometry report Laodpszcdarjfx Apdjg - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle - Fixed angle table - Coolant system - Chip tray

Condition: used, Year of construction: 1998, STIMIN Oradea FUS-22-2M Universal Tool Milling Machine Universal Tool Milling Machine STIMIN Oradea Lsdpfxezxhndo Apdsag Type/Model: FUS-22-2M Condition: Used Year of manufacture: 1998 Technical data: Travel, X-axis: 300 - 320 mm Travel, Y-axis: 240 - 270 mm Travel, Z-axis: 300 - 310 mm Tool holder: SK 40 / ISO 40 Spindle speed: 45 - 2,240 rpm (in 18 steps) Quill stroke: 60 mm (manually adjustable) Clamping surface: 670 x 320 mm Max. table load: approx. 75 - 150 kg (depending on table design) Feeds (X/Y/Z): 12.5 - 630 mm/min Rapid traverse: approx. 1,200 mm/min Spindle motor power: 1.5 kW - 2.0 kW Total connected load: approx. 2.5 – 3.0 kW (400 V / 50 Hz) Space requirement (L x W x H): approx. 1,200 x 1,100 x 1,620 mm Inquiry item: Transportation costs will be provided in an individual offer.

Condition: used, Year of construction: 1997, Hermle UWF 1202 S CNC machining center CNC machining center Hermle Type/Model UWF 1202 S CNC control Heidenhain TNC 426 Condition Used Year of manufacture 1997 Technical data Travel X / Y / Z axis: 850 mm / 630 mm / 500 mm Spindle speed: 20 - 4,200 rpm (stepless) Table dimensions: 1,200 x 550 mm Rapid traverse (X/Y/Z): 10 m/min Machine weight approx.: 5,500 - 6,000 kg Installation dimensions (L x W x H) approx.: 3.3 x 2.24 x 2.24 m Lsdpfszx Umtjx Apdeag Accessories: - approx. 85 collets SK 40 - extensive milling cutter assortment - swivel head - measuring probe - zero-setting device - set of parallel blocks - Almatic machine vise - dividing head - collet chuck Röhm ZG250 Inquiry item: Transportation costs in a separate quotation.

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1100 mm Travel distance Y :560 mm Travel distance Z: 510 mm Number of axis: 3 milling machine / machining center Control: HEIDENHAIN TNC 620 spindle chuck: SK 40 / ISO 40 spindle revolutions: 12000 rpm Speed range from: 20 U/min Speed range to: 12000 U/min table size X: 1400 mm table size Y: 560 mm max. workpiece weight: 1000 kg tool changer: 30 - time input Power : 13 kW Rapid traverse: 30 m/min spindle cooling chip conveyor control Heidenhain DMG MORI CMX 1100 V Year of manufacture: 2018 3-axis vertical machining center HEIDENHAIN TNC 620 control 12 bar high-pressure coolant system 30-position tool magazine 30 ISO 40 tool holders included Chip conveyor Electronic handwheel Machine is currently under power Ljdpfsz A Apujx Apdoag Demonstration under power possible by appointment

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Lasdpfx Aped Dgdyjdjg Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: used, Year of construction: 1990, functionality: fully functional, Control Heidenhain TNC 355 x-travel 1.000 mm y-travel 400 mm z-travel 450 mm surface area 1.300 x 400 mm feed range 1 - 6.000 mm/min number of spindle speeds 60 - 3.600 U/min vertikal number of spindle speeds 30 - 1.800 U/min horizonta spindle taper SK50 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Laodsd N Sngepfx Apdjg Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, input voltage: 400 V, Deckel FP4M Universal Milling Machine in excellent technical and optical condition. Machine no. 2203-1389 Laedjytb Uhopfx Apdeg Year of construction: 1984. Technical specifications: - Working travel X/Y/Z: 500/400/400 mm - Spindle speed range: 50 - 2500 RPM - Power: 3.7 / 4.4 KW - Spindle brake - Automatic feed: X-Y-Z, continuously adjustable, 6.3 / 630 mm/min - Rapid traverse X-Y-Z: 1300 mm/min - Fixed angle table - Vertical quill with 90 mm stroke - Tool holder: ISO 40/M16 - Weight approx. 1500 kg Machine options: - 3-axis digital readout Heidenhain - Coolant system - Chip tray - Central lubrication - Automatic pulse lubrication on the milling head - Machine manuals with spare parts list and electrical diagrams - Cabinet with accessories, see photos

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar Lasdpezbnr Asfx Apdsg WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only Laedpfx Aozlat Sepdeg one work area for bars up to 7.7 m long or two independent work areas with piece load/unload while machine is working. It has an 8 place tools storage on board the X axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section.

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Lodpow Ip Dgofx Apdsag Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: used, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, overall weight: 1,800 kg, DECKEL FP3 L MILLING MACHINE X-axis travel: 800 mm Y-axis travel: 300 mm Ledpfx Aoz Ak Axspdeag Column travel: 200 mm Z-axis travel: 400 mm Spindle speed: 25 - 2,000 rpm Motor power: 4 kW Feed rate: 5 - 500 mm/min Rapid traverse rate: 1.5 m/min Work table: 1,000 x 700 mm Tool holder: SK40 Weight: 1.8 t Heidenhain optical scales

Condition: used, Year of construction: 1933, x-travel 1600 mm y-travel 1259 mm Laedpfx Aez Aun Sopdjg z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, For sale is a very well-maintained 5-axis simultaneous machining center, DECKEL MAHO (DMG MORI) type DMU 60 monoBLOCK, manufactured in 2009. The machine is characterized by very low spindle hours and extensive equipment. Highlights & General Information: Manufacturer / Model: DECKEL MAHO (DMG MORI) DMU 60 monoBLOCK Year of manufacture: 2009 Control system: HEIDENHAIN iTNC 530 Operating hours: approx. 30,000 h Spindle hours / program runtime: approx. 8,000 h Technical Data: Travel ranges: X = 730 mm Y = 560 mm Z = 560 mm 4th axis (B-axis / swivel head): +30° to -120° (NC swivel milling head with hydraulic clamping) Lsdpfozz Snyex Apdeag 5th axis (C-axis / rotary table): 360° (endlessly rotating NC rotary table, resolution 0.001°) Main spindle: Max. 12,000 rpm Tool holder: SK 40 Tool changer: 60-position chain magazine Equipment & Accessories: Internal coolant supply (IKZ) including paper band filter system Chip conveyor Workpiece measuring probe: DMG TS 649 Complete documentation and machine keys available Upon request, for an additional charge, loading and transport (throughout Europe) can be arranged. All prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours?

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Lsdozx Rq Iopfx Apdjag Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2010, Milling machine, manufacturer Knuth, model UFM 3 Plus. Digital display, numerous accessories included. Lasdpfxez Aff Uj Apdog

Condition: used, Year of construction: 1997, Maho milling machine MH 600 E with numerous accessories, in perfect working order. Lajdpfx Aez Affhepdeg

Condition: excellent (used), Year of construction: 1987, operating hours: 800 h, Deckel milling machine FP 5 A Contour, in excellent condition, with numerous accessories. It has not been in operation for the last 20 years. Lajdpfsz Afdwox Apdjg