Used Milling for sale (9,373)

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ Kedpsdzqmrjfx Afaowu with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes Kwsdpfxedzqb Sj Afaju - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card Kwsdpfxsw Ed U Ns Afasu - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication Kedov Amryepfx Afajwu - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm Kjdpfoiy Ekvox Afaswu table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Ksdpeifu Arefx Afajwu Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: used, CNC tool milling machine MAHO type MH 400 E Machine No. 43072 Year of construction 1989 travel X: 400 mm Y: 250 mm Z: 375 mm table size 700 x 270 mm Kwsdpfx Afjh Ic Ufeaeu distance spindle nose / table max. 410 mm tool holder ISO 40 with draw pin type B spindle speed 80 - 4000 rpm. 18 steps feed speed 1-1500 mm/min. infinitely variable Rapid traverse (X, Z and Y) 2,5 m/min. Pinol shift vertical 50 mm spindle drive 2,2 kW mains connection 400 Volt, 50 Hz, 19 kVA - swivelling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - hydro-mechanical tool clamping - swiveling device for the vertical milling head - Splash guard cabin as table enclosure with 3 folding doors - Electrical control cabinet fixed to the machine - Interface V24 (RS 232) for data transmission - 52470 operating hours, main switch on - rigid angular table - coolant unit with coolant pump adjacent under the machine - central oil lubrication Vogel - operator's manual, electrical circuit diagram space requirement L x W x H 2250 x 1800 x 1850 mm weight approx. 1,5 ton. good condition

Condition: used, High-speed milling spindle HENNINGER Type 801 - N 503 Maximum speed: 6,000 rpm at 70% duty cycle Gear ratio: 1:6 Power transmission: up to 2.5 kW Projection: 110 mm (from machine spindle to clamping nut) Tool holder: SK 40- S20x2 Kjdpfjfxg T Uox Afaswu Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm Supplied in a wooden storage case The head is equipped with bronze gears for high torque. Net weight: 5 kg Total weight: 9.4 kg Good condition

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base Ksdedzp T Eepfx Afaewu - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Kjdpfx Afevwgtyoajwu Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6(40%/2 min) 41 kW max. torque on the spindle S6(40%/2 min) 49 Nm milling spindle motor S1(100%/2 min) 34 kW max. torque on the spindle S1(100%/2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: Ksdpfx Afsvwgm Hoajwu - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: excellent (used), CATALOGUE NO. 6623 TECHNICAL DATA - Output log diameter: 75–200 mm - Minimum input material length: 1100 mm - Stepless feed speed adjustment + forward/reverse - Cutterhead drive motor: 15 kW - Feed motor: 1.7 kW Configuration: Kwedpfxex Rqzae Afasu - 2 geared feed rollers - 4-knife cutterhead - 2 smooth outfeed rollers - Electrically adjustable cutterhead - Electrically adjustable rollers - Dimensions (LxWxH): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg ADVANTAGES – German-made – Ability to turn posts into cones – Used rounder, in very good condition Net price: 98,900 PLN Net price: 23,550 EUR (based on the rate of 4.2 EUR) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer of the manufacturer. All trademarks and names are used solely for identification purposes. We resell only goods that have already been placed on the market by the manufacturer. MAR-MASZ has no business relationship with the manufacturer.

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW Kwedpfx Afsyitz Ssaju - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes Kjdpfx Aoyll A Tofaewu - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Kodpfx Afsyapvtjaswu

Condition: used, SCM T 130 LL heavy-duty spindle moulder LL version – long table with pull-out frame support 7.5 kW motor 5 speeds, 3000–10,000 rpm automatic spindle height adjustment (up/down) control panel on top fence with fine adjustment WITHOUT power feed unit Machine is FULLY OPERATIONAL and in GOOD CONDITION Kwsdpfx Afoyi D Hloaeu Available from stock in Lieboch

Condition: excellent (used), Universal Vertical Milling Head This milling head was previously used on a Union TC130 table-type boring mill and is compatible with many other machines. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, as well as control system upgrades. Services: - Used machinery - Spare parts Kwsdpfjylg R Eex Afaju - Customer service - Machine maintenance - Machine overhauls - Control system modernization

Condition: excellent (used), Year of construction: 1995, Centre Height: 330 mm Centre Distance: 2,000 mm Working Area: Max. Swing Diameter over Bed Cover: 650 mm Max. Swing Diameter over Cross Slide: 360 mm Main Spindle: Spindle Diameter at Front Bearing: 140 mm Spindle Bore: 107 mm Main Drive: 58.5 kW 2-step Speed Range: 4 – 750 rpm / 750 – 3,060 rpm Feed Drive: Rapid Traverse X/Z Axis: 10/10 m/min Tool Turret: Number of Tool Stations: 12 Of which Driven Tool Stations: 6 Tool Shank Holder: VDI 50 mm Dimensions / Weight: Footprint (L x W x H): approx. 6,400 x 2,150 x 2,000 mm Weight: 9,400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-station turret, VDI 50, including 6 driven tools in turret, brand SAUTER, DIN 5482 B 20x17, max. speed 3,000 rpm • Hydraulic 3-jaw chuck, Ø 315 mm, with various chuck jaws Kwodpfxex Sx Hto Afasu • Hydraulic tailstock with drag device • Hydraulic quill actuation • LTA make air extraction system • Various VDI 50 tool holders • CE compliant In 08 / 2025, the following parts were replaced by GILDEMEISTER service: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 single regeneration module, 1 control insert for 1 axis, 1 control module for 2 axes of the inverter servo drive, 1 Simodrive power module for 1-axis motor. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Kwjdjwvrfkopfx Afasu Stock Clearance at 39.000EUR ONLY

Condition: used, Punching machine Kwodsxyl D Sopfx Afaeu

Year of construction: 2015, condition: used, Empty weight: 3.600 kg Dimensions (LxBxH): 210 x 210 x 220 cm Price: On request - Year: 2015 - Documentation available: Yes Ksdpfx Aoymfwysfaowu - CE marking present: Yes - CE certificate present: No - Serial number: 5752 - Drive system: CNC - Horizontal/vertical: Horizontal and vertical - Control system brand: Heidenhain - Power [kW]: 12.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1250 - Y-axis travel [mm]: 540 - Z-axis travel [mm]: 520 - Table length [mm]: 1800 - Table width [mm]: 400 - Tool holder: BT50 - Main spindle power [kW]: 7.5 - Min. spindle speed [rpm]: 275 - Max. spindle speed [rpm]: 2000 - Tools included: Yes - Transport dimensions: 2100mm x 2100mm x 2200mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 1,700 mm, total width: 1,600 mm, total length: 1,800 mm, Empty weight: 1.650 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal - Power [kW]: 4.0 Kjdpfxoymfn Es Afaewu - Number of axes [pcs]: 3 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 550 - Z-axis travel [mm]: 430 - Table length [mm]: 1100 - Table width [mm]: 255 - Tool holder: ISO30 - Min. spindle speed [rpm]: 38 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - └ Type of digital readout: Sony - Transport dimensions: 1800mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Supplier Ksdpfex It Auox Afajwu

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Cutter spindle mount: MK 5 Speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening swivel plate diameter: 450 mm Swivel range: -5° to +45° Weight: approx. 850 kg Storage location: Supplier Kwedpfex It Anox Afaeu

Condition: excellent (used), CATALOG NUMBER 6056 TECHNICAL DATA - Max workpiece height: 250mm - Spindle working length: 260mm - Spindle diameter: 40mm - Worktable (LxW): 630x360mm - Guide - Motor power: 9.3kW - 2 pneumatic material clamps - Extraction port diameter: 2x120mm - Air requirement: 8 bar - Dimensions (LxWxH): 1370x980x1620mm - Weight: 450kg Kwsdoyh Uixspfx Afaju – Unpainted – 2 cutters included – Italian-made – Used milling machine, in very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)