Used Mini Rotary Milling Machine for sale (66,862)

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm Cgsdpfx Afeubbryjpjn - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: used, Year of construction: 1997, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total width: 3,500 mm, total height: 2,300 mm, input voltage: 400 V, air pressure: 6 bar, suction capacity: 12,000 m³/h, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) Cgodpjv Unhgefx Afpen total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), pieces height 120 mm, depth 65mm, rotation speed 8m/min

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Codpfxexcilrj Afpogn

Condition: good (used), Year of construction: 1985, table diameter: 1,600 mm, rotary table diameter: 1,600 mm, 2x spindles (motors) for shaping Ijbexqhcxsiafky Ueii 2x sanding devices Cgsdexqhcxepfx Afpsn Table diameter 1600 mm

Condition: used, Univ. swivel-tilt-rotary table Codpegp T D Nofx Afpsgn Add-on table for Univ. tool milling machine table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 - 4x T-slot Weight approx. 120 kg

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Csdju Tln Nepfx Afpogn Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Csdpfed E A I Nox Afpjgn Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: new, Year of construction: 2024, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Cjdjr D Nmkspfx Afpegn Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Year of construction: 1967, condition: good (used), WKG 234 Offered here is a rotary table continuous milling machine milling from the company Müller of the type Duo Främatic. Cgjdpfxsg Ummas Afpen 
Technical data: Manufacturer: Müller Type: Duo Främatic Year of construction: 1966 Tool holder: ISO 50 Round table clamping surface inside: 650x1490mm travel: endless rotary small feed: 100mm/min large feed: 2000mm/min max. rotational speed: 650 rpm low speed: 88 rpm speeds: 8pcs weight: 5t milling spindles: 2 pieces distance table to spindle: 350mm power requirement: 27kW Remark: Suitable for carbide cutter heads (ø315mm) for light metal up to ø400mm. cutter lifting automatically with 1mm possible quill adjustment each 100mm drive of milling spindle separately possible There are several machines available!

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: Codpfxsyahv Sj Afpogn FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Cjdox D Tbmepfx Afpsgn Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Cgjdpexxb Rrofx Afpjn Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, rotational speed (max.): 4,000 rpm, table load: 400 kg, controller model: Heidenhain TNC 407, TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 400 mm Clamping surface: 900 x 468 mm Maximum table load: 400 kg Cjdpfxeyf Agcs Afpjgn Tool holder: SK40 Spindle speed range: 20 – 4,000 rpm Drive power: 5.9 kW Tool changer: 32 positions (HTC 32) MACHINE DETAILS Control: Heidenhain TNC 407 Dimensions & weight Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Machine weight: approx. 3,500 kg Note: The machine's Simodrive is defective.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,572 h, functionality: fully functional, travel distance X-axis: 3,230 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 750 mm, table width: 1,650 mm, table length: 3,000 mm, TECHNICAL DETAILS X-axis travel: 3,230 mm Y-axis travel: 2,100 mm Z-axis travel: 750 mm Table length: 3,000 mm Table width: 1,650 mm Cgodpfx Aeyd Acbofpon Max. spindle speed: 3,500 rpm Tool holder: ISO50 Tool magazine: 30 pcs Positioning accuracy: 0.005 mm Traverse speed: 250 mm/s MACHINE DETAILS Control: CNC Number of axes: 4 Power: 22 kW Main spindle power: 22 kW Tool magazine: 30 pcs Control operating hours: 5,269 h Spindle hours: 1,572 h EQUIPMENT External cooling Tool magazine Touch probe Tool measuring system Spindle cooling Chip conveyor

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Travel Y: 2500 mm Codpfx Afoyf A H Njpogn Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J Cgsdpfswzivdjx Afpen - Weight (kg): approx. 420 - Workable material: KFB 353 = PVC and aluminum profiles

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm Cgodpfx Aex R Du Hofpsn - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: good (used), functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 600 mm, For sale: the MAHO MH 1000 milling machine shown in the photos, manufactured by the German company MAHO. The machine is operational, connected, and ready for work. Its condition is assessed as very good. The machine can be connected and test-run on site. Loading the machine is included in the price. TECHNICAL DATA: - Rapid feeds on all axes - Mechanically clamped tool - X axis travel: 1000 mm - Y axis travel: 750 mm - Z axis travel: 600 mm - Spindle taper: ISO 40 - Quill with automatic feed - Swivel head - Table dimensions: 740 x 1250 mm, triple-swivel - The table has an additional manual travel on the Y axis of ±200 mm - Table swivels 360 degrees - Table swivels longitudinally and transversely ±30 degrees - Speeds from 32 to 1600 RPM - Machine dimensions: 3500x2500x2500 mm Cgsdpfovmhtyex Afpen - Weight: approx. 5500 kg

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. Cgjdpfxsw Uab Nj Afpon ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES Csdpoyg Iprsfx Afpegn – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW Cgsdoyg Ecvepfx Afpsn - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Coder A Eq Ropfx Afpjgn Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), Spindle Moulder SCHELLING FZ 4 Heavy-duty cast-iron construction Motor speeds: 2250, 3000, 4500, 6000, 9000 rpm Motor power: 4.5 kW, 400 V, 50 Hz Spindle diameter: 30 mm Spindle height adjustment: 100 mm Table dimensions (L x W): 1100 x 900 mm Extraction port diameters: 120 & 80 mm Spindle with forward and reverse rotation Electric motor brake Milling fence rotatable and finely adjustable OERTLI milling fence jaws with aluminium inserts INCLUDES HOLZHER power feed unit 3 rollers 4 speeds Machine dimensions (L x W x H): 1100 x 900 x 1200 mm Machine weight: approx. 750 kg Note on used machines: Cgjdpfoxt N Dvsx Afpon • Errors in technical specifications and prior sale are excepted. • Listed prices are ex-works prices - free loading at location! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any form of warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, Year of construction: 1993, functionality: fully functional, feed length X-axis: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 2,100 rpm, overall weight: 10,000 kg, We offer this used WAGNER WM 2600 milling machine, year of manufacture 1993. Type: WM 2600 Serial number: 9009279 Csdpfsyha Trjx Afpogn Year of manufacture: 1993 Travel distances X-axis: 2,500 mm Y-axis: 940 mm Z-axis: 1,000 mm Spindle speed: 2,100 rpm Table length: 2,600 mm MACHINE DETAILS Control: Heidenhain 355 Weight: 10,000 kg EQUIPMENT SK50 milling head If you have any further questions or require more information, please send us a message or call us.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: SÇ 5000 S ALÜMİNYUM PVC 3 EKSEN CNC FREZE MAKİNESİ, - Conforms to CE standards - It is a machine that can perform door, sash, arm barrel and triple drilling of aluminum and PVC profiles. - CNC control 10" touch screen - 3 independent axes (AXIS) - Cooling system for aluminum profiles - Metering system with right and left arm and rest - Precise operation thanks to linear slide system - Ability to adjust the speed settings of all processes Cgsdpfx Afera Nybjpen - Easy switching from touch screen to Aluminum Pvc profile and automatic change of speed settings - Unlimited memory capacity - Automatic protection cover for safety - Servo motor system in X, Y, Z axener