Used Mitre Saw Machine for sale (84,392)

Condition: used, Year of construction: 2002, functionality: limited functionality, saw blade diameter: 450 mm, feed length X-axis: 9,000 mm, Automated drilling and sawing machine for processing steel profiles and flats. The machine is equipped with an automated 3-axis drilling unit and a circular saw for automatic profile processing. This is an ideal machine for a starting steel constructor who wants flexibility and the ability to produce profiles easily. The machine can drill and saw profiles up to 450mm wide. The machine is available at an attractive price, as the horizontal drilling motors require some attention (the bearings need to be replaced and one of the gearbox housings needs to be replaced). The asking price is for the machine 'as is', without transport/installation, etc. There is also the option to purchase repair, transport, and installation services, which can be discussed on site. Kfjdox E S A Uspfx Aanja Price upon request.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements Kedjtqmmdspfx Aanofa - safety gates

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 07900350045, saw blade diameter: 380 mm, total width: 4,500 mm, Double mitre saw Elumatec DG 79, purchased new in Nov. 2006, used, fully functional, pictures attached, purchase invoice with electronic and machine data included. Kfsdpjx D Tmpefx Aanoa

Condition: excellent (used), Year of construction: 2018, Stromab CT600 circular saw with 6 m infeed table. Kfjdoxzu U Aspfx Aanoa

Condition: new, Year of construction: 2025, saw blade diameter: 600 mm, grinding wheel diameter: 30 mm, compressed air connection: 5 bar, New saw blade grinding machine - chip divider groove grinding machine. Grinding range approx. 120-600 mm diameter Saw blade tooth pitch max. approx. 22 mm Control: Siemens PLC with automatic shut-off after grinding process Grinding spindle: High-frequency spindle, 24,000 rpm, power 800 watts! Cooling: Minimum quantity lubrication Saw blade clamping: pneumatic Gearbox: oil-bath lubrication Saw blade thickness adjustment: via backlash-free preloaded ball screw Kfedpfx Aajqpdi Ronea Grinding stroke: via heavy-duty linear roller guide Accessories: - 1 set of reducing rings 16x22,25,32,40,50 mm - Circuit diagrams - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Compressed air connection: required for saw blade clamping (very low air consumption)

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. Kjdpfx Aemrnk Eeanjfa The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm Ksdpfxewz Hygj Aanjfa max. spindle speeds: 2800 U/min total power requirement: 3 kW weight of the machine ca.: 850 kg

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm tooth pitch 20 - 50mm Kodpfx Aaeglui Asnofa

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60115, Offer 25422 Hydraulic Two-Column Guided Mitre Band Sawing Machine (Automatic) Technical Data: - Fully automatic cutting process with hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorised mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 15 – 150 m/min - Stepless cutting pressure regulation: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting angle range: 30° – 90° - At 90° round: 335 mm - At 90° square/flat: 500 x 335 mm - At 45° round: 330 mm - At 45° square/upright: 320 x 335 mm - At 30° square/upright: 170 x 335 mm - Automatic material feed unit - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm Kfedpfsx Aqxaex Aanoa - Drive: 400 V / 6.5 kW - Space requirements approx.: W 2300 x H 1750 x D 2200 mm - Weight approx.: 1800 kg

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 Kfodpfx Ajupy Speansa 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, We offer machines, spare parts, and accessories for saw blade grinding machines of the types ECE 45 / EC 400 / EC 500 / ASG 1400 / ASG 2000 from the manufacturer "Schmidt Tempo". Thanks to our many years of experience, we can also support you with repairs of the above-mentioned machine types, including the supply of spare parts. Kedpfx Aoguxgpeanjfa NEW: Grinding spindles, used or new, available for ECE 45 / Freestyle, ECT 502, ECT 632/633, ASG 1400, ASG 2000, AS 9-12, AS 2-4, ASG 400/500, G400/500. If you have a specific requirement, please contact us by phone or email.

Condition: new, Year of construction: 2025, The CORMAK HBS260 band saw for cutting pipes, profiles and bars is widely used in all locksmith workshops where precision, quality and cutting speed are important. The model is equipped with a 0-60° swiveling arm. The frame design ensures accurate and quiet operation. It has a removable filing tray for easy cleaning! Machine characteristics A horizontal metal band cutter with a swiveling arm allows cutting in a plane perpendicular to the axis of the material being cut and at any angle ranging from 0 to 60°. The material to be cut can be fed manually or with any mechanical device, and the tool feed is automatic. The tape guides are equipped with special carbide plates and bearings. This has a huge impact on the belt guidance, its life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and saw blade. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The cutter's arm made of uniform cast iron together with the 27 mm wide cutting band used in this cutter allows it to fully perform multi-series cuts of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The saw blade guides are equipped with hard metal plates - sintered carbides and a rolling bearing system. It is the CENTRED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The shape of the upper part of the base constitutes a bathtub for draining coolant and catching chips generated while cutting the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the movement of the cutting band and the falling feed of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic actuator. The feed speed is regulated on the cutter's control panel. We can choose from two cutting band speeds: 35 and 70 m/min. In the lower position of the arm (after cutting the material), the cutting belt drive is turned off automatically. Safety is ensured by the cutting band covers and micro switches that stop the engine after the cutting cycle is completed or any of the covers are opened. Additional protection consists in automatic shutdown of the cutter in the event of the cutting band breaking. Cutting band size [mm] 2520 x 27 x 0.9 Tape tension mechanical (manual) Belt speeds [m/min] 35, 70 Adjustable arm drop stepless - hydraulic actuator Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame tilt [°] 0-60 Power supply 3 phases 400V Kfjdpoudi Uzsfx Aanja Main engine power [kW] 1.1/1.5 Cooling pump motor power [kW] 0.05 Dimensions with base [cm] 150x80x140 Weight [kg] gross/net - 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed touch control panel laser rotating work table 0° – 345° maximum blade diameter: 800 mm motor power: 16.6 kW year of manufacture: 2016 CE marked Kfsdpjxfr Etefx Aanja 400 V

Year of construction: 1982, condition: used, Circular saw blade sharpening machine Loroch JLM 36 Kfjdpocq Nghefx Aanoa

Condition: good (used), Double Miter Saw Rapid DGS – used, fully functional, ready for demonstration For sale is a Rapid Double Miter Saw DGS in well-maintained, working used condition. The machine is immediately ready for operation and can be demonstrated at any time. Features / Specifications: Model: Rapid DGS Precision double miter saw suitable for aluminum, plastic, and, if applicable, light metal profiles Sturdy, robust construction Miter cuts possible (both saw heads adjustable) Clean, technically flawless used condition Kfjdpfx Asxzdvisanja Condition: The machine is in full working order. All functions can be tested live during an inspection. Viewing & Collection: An inspection by appointment is possible. Collection by the purchaser – assistance with loading can be provided if required; crane and forklift are available. Price: Negotiable If interested or if you have further questions, please get in touch!

Condition: new, Year of construction: 2019, functionality: fully functional, saw blade diameter: 565 mm, cutting height (max.): 125 mm, overall weight: 350 kg, type of input current: three-phase, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, table width: 2,400 mm, input voltage: 380 V, saw drive: 4,000 W, spindle speed (min.): 2,800 rpm, spindle speed (max.): 2,800 rpm, height adjustment type: mechanical, main saw diameter: 565 mm, saw blade speed: 2,800 rpm, Equipment: CE marking, saw blade guard, We are offering for sale a radial saw in as-new condition, suitable for precise sizing and angle cutting of large cross-section timber. Includes an additional roller material feed table. VAT invoice available for companies. Viewing is possible on working days by prior arrangement in Derecske. We can assist with loading. Kjdpfxjxv Tn Re Aansfa

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: C123969, saw blade diameter: 500 mm, rotational speed (max.): 2,820 rpm, overall weight: 1,490 kg, tilt adjustment saw blade: 22 °, TECHNICAL DETAILS Speed: 2,820 rpm Number of saw blades: 2 Saw blade diameter: 450 & 500 mm Saw angle: 22° - 90° Motor Blade motor power: 2.2 kW MACHINE DETAILS Weight: 1,490 kg Motor Blade motor power: 2.2 kW Kfsdpfxoxwnhuo Aanea Electrical data Power: 5.3 kW Current: 13 A Voltage: 400/3 V Frequency: 50 Hz EQUIPMENT Chip conveyor Note: The machine is available from 01.12.

Year of construction: 2004, condition: excellent (used), Technical specifications: System for welding longitudinal seams on steel beams with T- or H-profile, crane runway girders or bridge sections made of sheet metal - Max. boom arm height: 6,600 mm - Total length of the welding system: 6,700 mm - Horizontal reach of the boom arm: 5,000 mm - System runs on rails Kfsdpfjxz Hu Iex Aansa - Rail gauge: 2,065 mm - Submerged arc welding process (SAW) - SAW welding units - Power source: MESSER LG800N - Number of power sources: 2 units - Output: 400 amperes - Tack welding device The system is assembled and available for inspection under power in production. The seller assumes no liability for typographical or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2008, The machines are in operation. The linear guides have been replaced. The machines are in excellent condition. Kodoxx Ubwspfx Aanefa

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Kfsdpfxed Sr Sio Aanea

Condition: good (used), Double Mitre Saw Elumatec DG 740/02 – used, operational, ready for demonstration For sale is an Elumatec double mitre saw DG 740/02 in good, fully functional condition. The machine is immediately ready for use and can be demonstrated on site. Technical Data / Features: Model: Elumatec DG 740/02 Double mitre saw for precise cutting of aluminium and plastic profiles Kfsdpfx Aasxzdulonoa Robust construction, precise cut guidance Both saw units are pivotable / can perform mitre cuts Cleaned and well-maintained used condition Condition: The machine is in working order and in age-appropriate good condition. All functions can be tested live during viewing. The machine has been removed from production, cleaned, and is ready for demonstration in a warehouse until sold. Viewing & Collection: A non-binding inspection is possible by appointment. Collection by the buyer. Price: Negotiable If you are interested or have any questions, please feel free to contact us!

Condition: good (used), functionality: fully functional, cutting length (max.): 600 mm, pivoting range: 20,135 °, For sale: 1 used double mitre saw Manufacturer: Hebö Maschinenfabrik Model: unknown Year of manufacture: unknown Saw blade diameter: 500 mm Processing length: up to 600 cm Mitre angle: 20 - 135 degrees Control system: see picture Kfedpfexrag Esx Aanoa The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: as good as new (ex-display), Used block bandsaw CTR520, demo machine at a special price, for logs up to 63 cm diameter, manual cutting sequence, highest cutting accuracy, height adjustment via hand crank, fitted with bimetal saw band for all wood types, max. log diameter 600 (520) mm, max. board width 460 mm, motor output S1 4 kW, standard cutting length 3.6 m, saw band 3110 x 27 x 0.9 mm, extension section cutting length 2.25 m, weight 218 kg, CE, 3 kW S1, 218 kg. Extras not included in price. (Sample image) Kedpfjvrvq Rsx Aanefa

Condition: used, Band saw shaping machine Vollmer CAS L Feed from left to right Kfedpfx Aaecvhubonja with support frame Auxiliary feed very good condition

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Kfsdpfx Aevrvqwoanja Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)