Used Mof for sale (218)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Multivac R-245 Thermoformer year of construction 2011 built in vacuum pump. Foil wide 422 mm. 2x tools 1x 2 splitted 380 x 300 mm x 380 x 182 mm Max Deep 145 mm. 1x 6 Splitted 240 x 115 mm Max deep 145 mm. Lhedpfx Aexcpfrebcsd

Year of construction: 2011, condition: like new (used), functionality: fully functional, COLIMATIC THERA ID.NO. 2902 Ledpfev Ablhex Abcjhd Colimatic Thera 250 deep draw machine in new condition! Year model 2011 built-in vacuum pump Busch 63cc. Round tools with a diameter of 110 mm. Foil width 422 mm, rejection 170 mm Dimensions 345 x 100 cm H 190 cm.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, HAJEK VS 30L/355-100 ID.NO. 2702 Hajek Deputies with vacuum / gas built -in vacuum pump & elmoprinter date aggregate. Rolller for spill plastic 4-part tool Dimensions 150 x 145 mm max depth 110 mm. Foil width 360 mm Rejection 340 mm. Dimensions 470 x 90 cm Height 220 cm. Lhedotrf Nyspfx Abcsd

Year of construction: 2022, condition: like new (used), functionality: fully functional, ILPRA TMF SPEEDYFORM Lhjdpfx Ajv R Dk Nsbcsd ID.NO. 2945 Ilpra mod TMF / Speedyform deep drawing machine year mod 2022 used in small-scale production approximately 12 months.Rigid underfilm, Punch, Marking system, Cooling machine Foil 362 mm, Rejection 237 mm, Gas machine.Division 2:2 Dimensions 195 x 145 mm Max D 110 mm.Dimensions 350 x 115 cm H 165 cm.

Year of construction: 1999, condition: excellent (used), CFS / TIROMAT COMPACT ID.NO. 2568 CFS / Tiromat compact with associated Mr label year mod 1999. Updated electronics with Siemens touch display. Rejection 350 mm äfoil width 422 mm. Ledpfxepcddxs Abcjhd 6 part tool 119 x 150 mm Max depth 140 mm. Dimensions 615 x 105 cm H 215 cm.

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Lsdpfxex Uz Nco Abcshd Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production.

Year of construction: 2010, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 443, Used in the biomedical sector for thermoforming blister packs. Bottom film reel width: 320 mm, top film reel width: 300 mm, vacuum pump. Ljdex H Tcfspfx Abcshd

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 3,100 mm, total height: 1,600 mm, overall weight: 750 kg, type of input current: three-phase, input current: 12 A, pressing force: 9 t, input frequency: 50 Hz, operating temperature: 200 °C, input voltage: 400 V, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, Lhjdpoiimw Ajfx Abcsd -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Year of construction: 1996, condition: excellent (used), Thermoformer Brand Multivac Model R 530 Machine number: 837 Year of construction: 1996 Power 15 kW Voltage 415 V, 3 Ph, 50 Hz, 35 A Film width: 620 mm Form: (3x) 180 mm x 160 mm Lhedpfxowa D A As Abcod Labeler Brand MR Etikettiertechnik GmbH Model MR293 Machine number: 23646/05 Year of construction: 2004 Overall dimensions: 8800 mm x 1400 mm x 1960 mm Including suction device for resting film Dimensions: 600 mm x 500 mm x 1060 mm Without main vacuum pump, vacuum was regulated centrally, labeler is incomplete.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Geiss DU 2200 x 1200 x 620 T8 Lhedpfotx Dfyjx Abcjd Max. sheet size: 2200 x 1200 mm Max. forming area: 2160 x 1160 mm Min. forming area with adjustable window plate: 1150 x 640 mm Max. tool height: 620 mm Total connected load: 112.7 kW Year of manufacture: 2001 Equipment: - Top heating: quartz emitters, motor-driven - Bottom heating: quartz emitters, pneumatically driven - Digital radiation pyrometer in the top heating - Photocell control for automatic limitation of pre-blow height - Additional photocell for sag control - Top punch pneumatic, 2 cylinders - Window plate, motor-adjustable - Siemens control system - Prepared for the installation of a sheet feeding system The platform is not available.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines. Lhjdpfxortq I Ej Abced

Condition: excellent (used), Year of construction: 2023, functionality: limited functionality, Manufacturer: Breyer Extrusion Item: Die, 3 layer die 2300mm 3-layer flat sheet die, 2,300 mm width (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price at the time: €365,500 Total price at the time: €444,200 Key technical data of the die: - Total throughput: approx. 700 kg/h - Designed for HDPE material - Gross discharge width: 2,300 mm, adjustable via deckling - Lip opening: 16 – max. 26 mm - Heating: Electric via heating cartridges 400V / 50Hz - Die heating capacity: 137 kW - Co-extrusion adapter heating capacity: 7.5 kW Comprising: - Die (main die body) 3 channels - Co-extrusion adapter - Die body - Die lip body - Attachments / screws - Attachments for deckling and co-ex adapter parts - Attachments for adjustment mechanisms (Note: Photos are from 2023) The die now shows signs of use and is stored disassembled. The heating elements are included but not installed. The die is located in 78224 Singen (Hohentwiel) at the manufacturer’s premises. An inspection on site is possible by prior appointment. Further photos available on request. You are welcome to submit a price proposal. Reasonable offers will be considered. Please provide complete contact details with your enquiry! Lhsdpfx Abex A D Emecod Delivery may be available for a fee. You are also welcome to inspect the item on site. Please call to arrange an appointment. A quick tip: Become a “FOLLOWER” of ours here on Kleinanzeigen to stay up to date with our latest listings and offers. This item comes from insolvency proceedings and thus shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Sale is without any warranty. Liability, reduction or rescission is expressly excluded. An inspection prior to purchase is recommended, as it is sold as seen. All information is provided without guarantee. Errors and changes excepted. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of liability for visible and hidden defects, especially technical quality, performance, or usability issues. Due to time constraints, we will only respond to serious enquiries and price offers! This is an advertisement for informational purposes only. Inspection strictly by appointment only! Best regards, Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. 0152 31381635

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film Lhedpstndpzefx Abcjd and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: good (used), Multivac thermoformer currently setup to produce ‘hotel style’ jam packs, 14g and 20g. 32 portions per cycle. Could also be used to produce ice cubes, sauce packs, ketchup, stock etc. Can also be supplied as a line with M&P 32 head filler and end of line tray wrapper if required (at extra cost). Lhsdpfxetp N Ddj Abcjd

Condition: good (used), R245 in lovely condition. Was packing sauces. Currently has no tooling so customer can adapt to suit their needs. Comes with frame to mount date coders on but without coders. 422mm bed width. Lhedeq Dagbspfx Abcod

Condition: good (used), Year of construction: 2011, Multivac R535 thermoformer. Currently set up for 5 across bacon packs, 2 x 5 x 240mm x 94mm. Flexible film, 566mm wide. 8m long. Ledpjwlfh Refx Abcshd

Condition: good (used), Lovely R245 thermoformer for sale. Flexible film, 2 x 4 x 205 x 115 packs per cycle. Has been packing sous vide products like ribs, lamb shanks etc. Lsdpfx Ajq Amldobcjhd

Condition: excellent (used), Multivac R245 in excellent condition. Supplied without forming tool. 422mm wide. 7.8m long. Very low running hours. Lhedpfxerp Dyge Abced

Year of construction: 2025, condition: new, Fully Automatic Thermoforming Machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulds, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, OMRON PLC, touch screen and servo motor, SCHNEIDER relay and air switch. Upper packing materials: heat-sealable films, lower packing materials: thermo-formable, heat seal film, rigid and flexible film is possible. - Specifications: total power: 380V, 13kW; air: 1m³/6bar; vacuum: 0.8-1.0m³/6bar; water: 4 liter/min; max. upper film width: 390mm (practical width 350mm); length per mould: 200mm; max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film); loding area: standard 1m (optional: additional length); max. speed of the machine in neutral: 6 cycles/min; machine dimensions: L4560xW1020xH1950mm; weight: 1500kg. Ljdpfxsv Nkz So Abcjhd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Fully automatic thermoforming machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food such as sandwiches, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulding tool, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, SMC pneumatic components, DELAT PLC and touch screen. - Specifications: upper packing materials: heat-sealable films, max. film width: 400mm; lower packing materials: thermo-formable, heat seal film (rigid and flexible film is possible), thickness: 300 - 900µm, upper film width: max. 400mm + 2mm, max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film); loading area: 120cm – 150cm (optional: additional length); max. speed of the machine in neutral: 8 cycles/min; power: 3P, 380V, 50/60Hz; air: 1.2m³/min, 8bar Ljdpfxev Nk Ace Abcshd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Fully automatic thermoforming machine for forming and filling small plastic vials with liquids, creams or pasty products. Specifically designed for use in the pharmaceutical, food or chemical industries. Easily interchangeable modular trays allow the production of vials of different sizes and shapes. Suitable for the production of multiple packs, whose number can be set as needed. Dosing and filling of the filling material is performed by a peristaltic pump, which is characterized by easy operation, cleaning and adjustment. - Specifications: packaging materials: PVC/PE composite film, PET/PVDC as environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for e.g. pesticide packaging; packaging thickness: 0.25-0.35mm; max. roll outer diameter: 400mm with standard core (70-76mm); max. drawing depth on one side: 12.5mm; max. molding surface: 120mmx210mm; vial height: 58~108mm; filling range: 1~50ml/vial; max. speed of the machine in neutral: 25 cycles/minute; power supply: 380V, 50Hz; power consumption: 17.5kW; compressed air and consumption: 6bar, 400L/min; cooling water: temperature 14~180°C, pressure 1.5~2bar, closed circuit 6L/min; machine dimensions: L7200xW960xH1800mm; weight: 2200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lhodpfx Abjv Nk Aiocsd

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Lodpsxm Sa Hsfx Abcehd Condition: Second hand Price: By request

Condition: good (used), Webomatic APS ML 7100 thermoformer The APS ML 7100 is the ideal tool for the industrial serial production of superior thermoformed packages. Even bigger dimensions enable the realisation of more flexible packaging! Our high-end solution can use all film materials common in trade up to 620 mm width with a repeat length of up to 800 mm: Depending on the product requirement and the client’s specification the APS ML 7100 can use soft film and rigid film materials, also printed top and bottom film as well as stable or reclosable packages. Equipped with two separate stainless steel lifting systems with adjustable opening width, the modular APS ML 7100 is extremely flexible in length and width: This industrial solution does not only offer an extra long filling area for the comfortable fully automatic filling process, but also a flexible cutting area for the optional punching, printing, labelling. This machine will be shipped with 1 tool: 2×1: Traysize 385×285 (variable depth with a max. of 190mm) Brand: Webomatic Model: APS ML 7100 Year: 2004 (completely refurbished in 2023) Top film width: 600 mm Bottom film width: 620 mm Deep drawing depth: 190 mm Cutt off length: 400 mm Vacuum Pump: Busch 100-132 / Busch WV 500 Lodpfx Aoqmndcebcehd Power: 21kW / 35A / 400V /50Hz Pressed air connection: 6-12 bar Operational air pressure: 6 bar Machine Dimensions (LxWxH): 7.800x1.300x2.100 mm Machine Weight: 2.600 kg.

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 191, type of input current: three-phase, pressure: 10 bar, total width: 3,050 mm, total length: 2,400 mm, total height: 3,480 mm, control cabinet width: 850 mm, control cabinet height: 1,800 mm, control cabinet length: 600 mm, This machine was overhauled in 2020 and installed at a customer and was not or hardly used. Machine is in excellent condition. Has been professionally disconnected and transported. Ledewpfrkepfx Abcehd

Year of construction: 2018, condition: used, Multivac R270CD with skin pack and MAP pack. Overhauled in 2018, this machine came out of production week 37 2024. Machine comes with several moulds, spares and with 3 vacuum pumps incl. - Booster pump Ljdpfsuk Sp Nsx Abcshd - Busch R5 360m3/h - Busch R5 100m3/h Only 668 production hours, everything build in. Good to go for production. Dimensions from all the tooling is in the photo album