Used Mold Steels for sale (19,375)

Condition: good (used), mileage: 2,54,602 km, power: 225 kW (305.91 HP), first registration: 08/1987, fuel type: diesel, empty load weight: 12,560 kg, maximum load weight: 15,440 kg, overall weight: 28,000 kg, axle configuration: 8x4, wheelbase: 4,200 mm, fuel: diesel, gearing type: mechanical, emission class: none, total length: 8,700 mm, total width: 2,550 mm, total height: 3,000 mm, displacement volume: 12,756 cm³, nominal power: 225 kW (305.91 HP), Equipment: ABS, EBS, differential lock, electronic stability program (ESP), trailer coupling, Key Features Internal Reference: 26234M Chassis Number: WJM J3B N8M Serial Number: 412.101.170 Vehicle Model: 300-30 AH 8x4 Hooklift, Full Steel Vehicle Make: Iveco Product Category: Hooklift Condition: Used Mileage: 254602 Emission Standard: None Date of First Registration: 08/01/1987 Last Inspection (MFK or TÜV): 09/28/2022 Bsdpfx As Agcmisgksdi Fuel Type: Diesel Overall Vehicle Condition: Good Engine Displacement (ccm): 12756 Engine Power: 306 Transmission Type: Manual Suspension: Steel-Steel Cab Vehicle Equipment: ABS, Trailer Coupling, Differential Lock, EBS, ESP, Radio Number of Seats: 2 Air Conditioning: No air conditioning Axles & Tires Axle Configuration: 8x4 Axle 1: 315/80 R 22.5/12mm, Disc Brakes, Leaf Suspension Axle 2: 315/80 R 22.5/7mm, Disc Brakes, Leaf Suspension Axle 3: 315/80 R 22.5/13mm, Disc Brakes, Leaf Suspension Axle 4: 315/80 R 22.5/10mm, Disc Brakes, Leaf Suspension Number of Axles: 4 Weights & Dimensions Gross Vehicle Weight: 28000 Payload: 15 Unladen Weight: 12560 Vehicle Wheelbase: 4200 Vehicle Height: 3000 Vehicle Length: 8700 Vehicle Width: 2550 Trailer Load: 6000 Body Body Model: Interchangeable Container Body, Hooklift

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine, clamping force 320t, shot weight 6935g, screw 130mm, preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-cavity, 4-stage, including removal set, conveyor belt, output 1825 preforms/hour. Bjdpenxkxwsfx Agksdi Output approximately 17,000 preforms/hour. MHT mold, 72-cavity, for 27.8g PCO 1810 or 1881. The machine comes from our own preform production and was in operation until we replaced it with our new machine.

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit Bodpsm Nclvsfx Agkodi clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: excellent (used), Year of construction: 1992, Boy 30 T2 Bdjdpfjuh U Izsx Agksi Closing force: 30 tons Year of manufacture: 1992 Screw diameter: 32 Injection volume: 64 g

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Equipment: documentation/manual, Top machine from cleanroom manufacturing (pharmaceutical industry) The machine can be inspected while powered on, by arrangement. Technical data Manufacturer: Engel Type: V 330H/80V/130 Combi 2-color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33107 h Control: CC 200 Extras - with rotary table, 820 mm diameter - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - protective enclosure/safety cage - horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional Dimensions L/W/H: see drawing Weight: 10600 kg Functionality: fully operational Condition: excellent Clamping unit Clamping unit: hydraulic Clamping force: 1300 kN / 130 tons Tie bar distance: tie-bar-less Opening stroke: 606 mm Tool installation height: 250 mm Centering: 125 mm Platen distance max: 850 mm Platen size: 750 mm / 850 mm (W x H) Injection unit 2K Bsdpfxeub Umqe Agkodi Screw diameter: 25 / 22 mm Injection weight: 72/ 35 gr. Injection pressure: 2391/ 2066 bar Injection volume: 79 / 38 ccm Ejection stroke / force: 61 kN / 100 mm GEKU robot details SR 500 ST Control: Simotion X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-swivel axis: SWM 45 C-axis: servo Gripper: SWS16 B-axis: not available The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Warranty Warranty until the first commissioning Loading/shipping Free loading onto the buyer's truck or free delivery to your location against reimbursement of shipping costs / worldwide delivery possible from our warehouse in Hanover / Germany Financing - upon request - lease-purchase option Price: upon request

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: AE150, Stainless Steel Food Mixing Machine: Intended for sauerkraut mixing with carrots, beets, salt, spices, also for salad, kimchi mixing etc. Bedpfx Agjd R Iwwekjdi The drum is rotated by inverter motor 1.5kW, with adjustable speed. The machine is solidly constructed and has a massive structure, made entirely of stainless steel. Mixing blades are screwed, and it is possible to replace them with a different shape of mixing blades. General Features: Machine-made entirely from high-quality stainless steel. Can mix high acidity products as fermented foods; Volume 100 liters, in one load, can mix up to 100 kg of products; Gentle mixing, minimal product damage. Very good for sauerkraut mixing; Can be used for Musli mixing. For other product, please, contact us; Can be equipped with wheels with a fixation for easy transportation; Easy to clean, can be washed with low-pressure water; All food contact elements made of stainless steel; Inverter motor can be rotated from 0-60 turns per minute; Automatic product discharge; Various electrical connections and standards available on request;

Condition: like new (used), functionality: fully functional, conveyor belt length: 2,700 mm, conveyor belt width: 3,100 mm, total height: 2,500 mm, Length 270 cm Width 310 cm Height 250 cm Carrier 3 cm With a large storage container Bsdpfx Asxqgnmegkedi

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: other, Year of construction: 2007 Empty weight: 7.385 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm Bedpfx Ajxqn Hqegkodi We have the possibility to stack trailers!

Condition: good (used), Stainless Steel Blancher Bdedpfx Aexp Rm Dsgkji Blancher Type: Screw blancher Screw diameter: Ø 430 mm Tier height: 400 mm Drum diameter: Ø 1700 mm Overall dimensions: 9000 × 2600 × 2800 mm Material: Stainless steel Industrial screw blancher made entirely of stainless steel, designed for thermal processing (blanching) of vegetables, fruits, and other food products. The conveying screw ensures uniform movement of the product and consistent temperature application throughout the chamber. The robust stainless steel construction guarantees durability, ease of cleaning, and suitability for use in automated production lines in the food industry.

Condition: used, axle configuration: 2 axles, first registration: 01/1996, color: other, Year of construction: 1996 Empty weight: 3.060 kg Bedpfx Agev Ivhhekedi Axle 1: left 10 mm right 8 mm Axle 2: left 7 mm right 11 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: new, Year of construction: 2026, neu 2026 090194 prompt, Zwischenverkauf v Spanien 22400 € 430.08 € 1 1 60 to 250 mm 5 40 x 11 mm Bodpowirnxofx Agksdi 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 Bdedpfx Aoynnggjgkoi 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm 130x12 mm 250x12 mm 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here, as a dealer of injection molding machines, we offer the following well-maintained, used injection molding machine: We also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection molding machines for over 25 years. Manufacturer: KraussMaffei Type: KM EX 80-380 (fully electric) Serial Number: 61013142 Year of Manufacture: 2009 Operating Hours: 35,808 h Control System: MC 5 Fully functional Condition: very well maintained Machine comes from a German original owner xxxxx without robot / without temperature control unit xxxxx Extras: - Needle-gate nozzle, pneumatically operated - Pneumatic valve 1 on back wall adapter plate (BWAP) - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Defect sorting chute - Nozzle protection door - mold opening protection door, hinged - Euromap interface 18 on front wall adapter plate (FWAP) - Ejector plate, electrically operated on BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection molding circuit - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP Bdodpfxoyrd U Uj Agkoi - Water manifold, 8-way - 8 x temperature control points for hot runner - Extrusion injection circuit with position point control - 3 x 230V sockets / 2 x CEE 16A / 1 x CEE 32A - Signal interface EUROMAP 67 for robot - Start-up circuit, QS package, cycle time analysis, cycle memory, event log - BluePOWER package – display of energy consumption - Graphics analysis package, trend graph - Interface for temperature control unit - Cycle time analysis, cycle setpoint optimization Main language: German Injection Unit Screw diameter: 40 mm Injection weight: 186 g/PS Injection pressure: 1860 bar Injection volume: 204 ccm Clamping Unit Clamping force: 80 tons / 800 kN Tie bar distance: 420 x 420 mm Platen dimensions: 655 x 670 mm Tool installation height: 250 mm Maximum distance between platens: 750 mm Ejector stroke / force: 100 mm / 22 kN Clamping unit: fully electric Warranty Warranty until first commissioning - Available immediately from our warehouse in Hanover, free loading onto the buyer's truck or free delivery to your location against reimbursement of freight costs throughout Europe. Worldwide delivery by container or box is also possible. Organization of customs clearance included. - The machine was tested before dismantling. - The machine is in our sole ownership. - The requested machine is available immediately in our warehouse in Hanover and will be offered after functional testing and can be inspected under power. For information about the machines we offer and our company: - We only sell our own machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are checked and tested before dismantling. - We do NOT sell insolvency goods. We are NOT a mediator who deals with third-party property. - All offered machines come from successful companies for which maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 24800 € 476.16 € 60 to 500 mm 5 2 40x11 mm 32 1/min 350x10 mm Bedpfx Aswiq Evsgkjdi 120x10 mm 45/40 mm 100x10 mm 150x10 mm 5.5 kW 2100 mm 1400 mm 2060 mm 1750 kg 5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 Bdsdpfx Agow Hwr Dokei The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million Bdedeyzumzjpfx Agkei - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a dealer of injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Vertical injection molding machine with rotary table – complete maintenance history (documented annually) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control: CC 200 Language: German, English Fully functional Condition: very well maintained Machine comes from a German first owner xxxxx without the depicted peripheral devicesxxxxx Extras * Light grid / light curtain * Freely programmable inputs and outputs * 9 freely programmable inputs can be programmed depending on the station * 9 freely programmable outputs * Handling interface Euromap 67 * Charge amplifier for internal pressure-dependent pressure switching, including the corresponding graphics pages * 3 potential-free monitoring inputs for monitoring peripheral devices such as temperature controllers * Euromap 63 interface for connection to a machine data acquisition system * Hot runner control / shut-off nozzle control * Complete maintenance log * Language: German - English Injection unit Screw diameter: 30 mm Injection weight: 89 g/PS Injection pressure: 1451 bar / increased 2205 Injection volume: 99 ccm Clamping unit Clamping force: 70 tons / 700 kN Diameter of rotary table: 1200 mm Opening stroke: 305 mm Ejection stroke / force: 105 mm / 20.1 kN Clamping unit: fully electric - Available immediately and can be loaded free of charge onto the buyer's truck at our warehouse in Hanover/Germany or free delivery to your location against reimbursement of freight costs – worldwide delivery possible - The machine was tested before disassembly - The machine is our sole property - The requested machine is available immediately in our warehouse in Hanover and is offered in working condition and can be inspected under power. For information about the machines we offer and our company: Bdedpey Ir Nyjfx Agkoi - We only sell machines that we have purchased from current production, from our warehouse in Hanover. - All offered machines are inspected and tested before disassembly. - We do NOT sell insolvency goods - we are NOT an intermediary that deals with third-party property. - All offered machines come from successful companies for whom maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: used, Year of construction: 2016, Injection moulding machine Bdodpfxjyqwfdo Agkei Type: Arburg 820S 4000-4600 Year of manufacture: 2016 Injection volume for PP = 2850 ccm Injection weight for PP approx. 2450 g The machine is offered without peripherals, handling equipment or safety fencing – purely the machine itself.

Condition: excellent (used), Year of construction: 2006, Equipment: emergency stop, foot remote control, Capacities: Force: 40 tons Bodo Adrfzepfx Agkjdi Punching: Ø32 x 11 mm Cutting of flat material: 200 x 13 mm 300 x 10 mm Angle iron: 80 x 80 x 8 mm Solid material: Ø 30 mm 30 x 30 mm Includes length stop.

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Price reduced for a quick sale – valid until 8 November 2026 due to the upcoming relocation of the storage system. Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² Bdodpfx Asz I Tm Iegkoi This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: used, axle configuration: 2 axles, first registration: 04/2009, total length: 8,200 mm, total width: 2,550 mm, total height: 2,850 mm, suspension: parabolic leaf (spring), tire size: 445/65 R22.5, color: other, = Additional options and accessories = - Leaf springs = More information = Year of construction: 2009 Tyre size: 445/65 R22.5 Make axles: SMB Brakes: drum brakes Suspension: parabolic suspension Empty weight: 6.760 kg Carrying capacity: 26.240 kg GVW: 33.000 kg Bdsdezw Hugepfx Agkji Tipper: Back

Condition: new, New steel scaffold ladder – robust, connectable, and suitable for scaffold construction Bdjdpfe Aaxftjx Agkji New steel scaffold ladder for safe access within scaffold structures. The ladder has a tube diameter of 48.3 mm and can therefore be attached to the scaffold using standard cross or swivel couplings. Thanks to the insertion tube, multiple ladders can be easily connected for extra length. 🔧 Specifications Type: Scaffold ladder Material: Galvanized steel Tube diameter: Ø 48.3 mm Condition: New Design: Connectable with insertion tube Available lengths: 2.00 m 3.00 m 4.00 m ✅ Advantages Robust galvanized steel construction Easy to attach to scaffold tubes Connectable for greater heights Suitable for standard cross and swivel couplings Available in multiple lengths Suitable for professional use Application Suitable as an access ladder within scaffold structures and widely applicable in scaffold construction, construction, renovation, and maintenance.

Condition: used, Used stainless steel container / transport container / IBC Last use: Chemicals Article number: 10911 Volume: 1000 liters Type: Standing in a galvanized stacking frame Material (in contact with media): 1.4301 / AISI304 Manhole: 400mm Design: Single-walled Operating pressure according to nameplate: 0.1 bar Container dimensions: Overall width: 1020mm Overall length: 1220mm Overall height: 1650mm Bjdpfx Agsz Sy Rpskedi Materials: Inside: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Nameplate: Yes Outlet diameter: 50mm Outlet valve: Ball valve Distance from outlet to bottom: 260mm Empty weight: 224kg

Condition: used, tank capacity: 840 l, overall weight: 247 kg, Used stainless steel container / transport container / IBC Last use: Chemicals Article number: 10913 Volume: 840 liters Type: Standing, in a galvanized stacking frame Material (in contact with the medium): 1.4301 / AISI304 Manhole: 400mm Design: Single-walled Operating pressure according to nameplate: 0.2 bar Container dimensions: Overall width: 1000mm Overall length: 1200mm Overall height: 1400mm Materials: Inside: 1.4301 / AISI 304 Exterior parts: Galvanized steel Features: Nameplate: Yes Outlet diameter: 35mm Outlet valve: Ball valve Distance from outlet to bottom: 250mm Bdodoz Sy R Nspfx Agksi Empty weight: 247kg

Condition: good (used), axle configuration: 3 axles, first registration: 01/2013, suspension: air, Equipment: ABS, = Additional options and accessories = - EBS - Rear doors - Lift axle - Air suspension = Further information = Year of manufacture: 2013 Suspension: Air suspension Rear axle 1: Lift axle Unladen weight: 5,830 kg Payload: 33,170 kg GVW: 39,000 kg Tipping: Rear Technical condition: good Optical condition: good Bdjdpfxsz Av Uyj Agksi Vehicle number: Tipping semi-trailer: 01 MOL / Thermo / Steel-Aluminum / Lift axle / 28 m³ .: YA2B39C0632139291 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 5,830 kg Lift axle Steel-Aluminum 28 m³ No liability for printing and typographical errors, changes, prior sale, and errors. = Company information = No liability for printing and typographical errors, changes, prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email: