Used Mold Steels for sale (19,329)

Condition: like new (used), Used stainless steel transport container / IBC Last use: Foodstuffs Article number: 10722 Volume: 750L Gbodpfx Aaoinig Aetst Type: Standing, in a stainless steel frame Material: 1.4404 / AISI316L Design: Single-walled Dome lid Ø 400mm Empty weight: 196 kg Operating pressure according to nameplate: ATM Container dimensions: Overall height: 1545mm Overall width: 1000mm Overall length: 1200mm Distance from outlet to bottom: 450mm Materials: Inside: 1.4404 / AISI 316 Outside: 1.4404 / AISI 316 Equipment: Nameplate: Yes Outlet diameter: 250mm Outlet valve: Ball valve

Condition: good (used), Used stainless steel container Last application: Pharmaceutical Gjdpfx Aaeicnuretjbt Item number: 10717 Volume: 300 liters Type: Standing on 3 legs Height of legs: 780mm Material (media-contact): 1.4571 / AISI316 Design: Single-walled Operating pressure according to nameplate: ATM Max. operating temperature: 100°C Container dimensions: Outer diameter: 700mm Overall width: 810mm Overall length: 885mm Overall height: 2100mm Cylindrical height: 800mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: yes Distance from outlet to bottom: 510mm Outlet diameter: 47mm Various nozzles

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Gjdpfx Ajuy Ribeatsbt Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: not inspected (used), Used stainless steel tank with double jacket Tank has been cleaned! Article number: 10229 Last use: Foodstuffs Volume: Approx. 450L Type: Standing on 3 legs Material (in contact with medium): 1.4301 / AISI304 Design: With double jacket Gbjdpfx Aaodyuqpstst Bottom: Dished bottom Tank dimensions: Tank diameter: 1000mm Cylindrical height: 500mm Overall height: 1380mm Height of legs: 450mm Distance from outlet to bottom: 240mm Overall width: 1110mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Dome lid Ø 400mm with sight glass on the top Various nozzles Double jacket

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece Gbedjdahcvjpfx Aatet -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

Condition: used, Type: 229R200 Winkelstahl: 150x12 / 200x100x12 mm T-Stahl: 120 mm U-Stahl-Flansch: 200 mm Flachstahl: 140x20 / 200x14 mm I-Normalprofil bis: 200 mm Gesamtleistungsbedarf: 7,5 kW Maschinengewicht: ca. 4,1 t Raumbedarf: ca. 1,2 x 1,8 x 2,2 m Profilstahlschere mit - Messertaegertrommel fuer 4 Messerpaare Gbedo Dv Nkopfx Aatot - schnellem Messerwechsel

Condition: good (used), Year of construction: 2001, Used stainless steel container with insulation Last use: Pharmacy Item number: 10820 Volume: 5540L Operating pressure: +3/-1 bar Max. Operating temperature: +150 °C Type: Vertical on 4 feet Material (wetted parts): 1.4404 / AISI316 Design: Insulated Base: Dished base Tank dimensions: Cyl. height: approx. 1600mm Total height: approx. 3100mm Height of the feet: 800mm Outer diameter: 2000mm Godpsth Sc Njfx Aatjbt Distance from drain to floor: 120mm Materials: Inside: 1.4404 / AISI316 Outside: 1.4301 / AISI 304 Equipment: Rock wool insulation Flanged top floor Various connections on the top floor Dome cover on the top floor

Condition: used, Used stainless steel tank / transport container / IBC Last intended use: Chemical industry Item number: 10884 Capacity: 1,000 litres Type: Vertical, mounted in galvanized stacking frame Material (media-contacting): 1.4301 / AISI304 Manhole: 400mm Version: Single-walled Operating pressure as per nameplate: 0.10 bar Tank dimensions: Overall width: 1,200mm Overall length: 1,000mm Overall height: 1,520mm Materials: Internal: 1.4301 / AISI 304 External parts: Galvanized steel Fittings: Nameplate: Yes Gbodpfx Aaoydc Aujtot Outlet diameter: 47mm Outlet valve: Ball valve Outlet distance to floor: 235mm Empty weight: 207 kg

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Gbodsx Eiq Hspfx Aatst Year of manufacture: 1998 Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum Gedpfx Aasxzix Aotobt • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Gsdsyugalepfx Aatsbt Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Gedjyugctjpfx Aatobt Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: used, Item: AH-10291-10292-20,000L Gbedpjwgc Dlsfx Aatst External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Horizontal stainless steel tanks – 2 units. Manhole and 2.5" outlet at the end. Brand: Land engineering. AISI 304

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call Gjdpjwiq D Ejfx Aatsbt • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Gbedpfx Aajw Dy D Dotot Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Gbedpfx Aajx Avhyotst Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: used, Used stainless steel transport container on pallet Last application: Pharmaceutical Item number: 10870 Volume: 450 litres Type: Upright on transport pallet Product-contact material: 1.4301 / AISI 304 Manhole: 400mm Design: Single-walled Operating pressure as per nameplate: ATM Gbsdpfjwvq Rxjx Aatet Container dimensions: Total width: 720mm Total length: 900mm Total height: 1220mm Pallet: 1200 x 800mm Materials: Interior: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Features: Nameplate: no Outlet diameter: 50mm Leg height: 100mm Removable aluminium pallet

Condition: excellent (used), BERTOLI H5 150 Homogenizer – Stainless Steel BERTOLI H5 150 industrial homogenizer in stainless steel, designed for high-pressure homogenization of liquid and semi-liquid products in continuous processes in the food and beverage industry. The equipment allows the product to be subjected to high pressure to reduce and uniform the size of particles or globules, promoting the production of a more homogeneous and stable mixture. This process is especially important in products where it is desired to improve emulsion stability, reduce phase separation, and achieve a more uniform texture. Its industrial construction and product-contact parts in stainless steel allow it to be integrated into continuous processing lines for thermal treatment, pasteurization, and production of liquid foods. MAIN FEATURES -Manufacturer: BERTOLI -Model: H5 150 -Type: Industrial high-pressure homogenizer -Continuous homogenization process -High-pressure pumping system -Robust homogenization block -Reduction and uniformization of particle size -Improvement of product stability and homogeneity -Product parts in stainless steel -Pressure control pressure gauge -Sanitary inlet and outlet connections -Industrial construction for continuous operation -Integrable into existing process lines APPLICATION The BERTOLI H5 150 is designed to receive the product continuously, pressurize it, and pass it through the homogenization system. The application of high pressure generates mechanical forces that allow the particle or globule size to be reduced and a more uniform distribution to be achieved, depending on the characteristics of the product and the process conditions. Homogenization can contribute to improving properties such as emulsion stability, texture, consistency, and resistance to phase separation. It can be integrated with: Pasteurizers and UHT systems Heat exchangers Process tanks Mixing systems Sanitary pumps Deaerators Aseptic processing systems Automatic filling lines APPLICATIONS Especially suitable for dairy industries, beverage and juice manufacturers, sauce, cream, and emulsion producers, and other manufacturers of liquid or semi-liquid foods that require industrial homogenization. Depending on its configuration, it can be used for milk and dairy products, beverages, juices and nectars, sauces, emulsions, fruit preparations, and other liquid food products. The combination of BERTOLI technology and high-pressure homogenization provides a particularly interesting solution for industrial lines that require a uniform and stable final product. Machine available for inspection. Gbodpfx Aaowny Nzstjt Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Gbsdoymayiepfx Aatot Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: excellent (used), Year of construction: 2012, Krauss Maffei KM 160–1000 CX Injection Moulding Machine 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 160–1000 CX Year of Manufacture: 2012 Operating Hours: 57,654 hours Category: Hydraulic Injection Moulding Machine 🔧 Clamping Unit Clamping Force: 1,600 kN (160 tons) Platen Dimensions: 820 × 845 mm Tie-bar Distance: 520 × 520 mm Minimum Mold Height: 300 mm Maximum Opening Stroke: 950 mm 💉 Injection Unit Screw Diameter: 50 mm Injection Volume: 432 cm³ Gjdpsyv E E Defx Aatjbt Shot Weight: 393 g Injection Pressure: 2,304 bar ⚡ Electro-hydraulic System Pump Motor Power: 37 kW Heater Power: 18.7 kW 👉 Option to install Energy Saving System (ESS) – actual energy consumption reduction by up to 30–60% 📐 Dimensions & Weight Machine Weight: 9 tons Dimensions (L × W × H): 5.54 × 2.06 × 2.18 m

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Gbodsym Arbopfx Aatst Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Condition: used, 55m3 stainless steel horizontal tank diameter 2.50m length 11m steel grade AISI 316L Gsdpfxsv Idn Ns Aatsbt externally reinforced with rings drip tray included

Condition: excellent (used), Year of construction: 2005, Welcome We offer Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Medium: Water Gbjdjvyuvuopfx Aatst Temperature: 160° C Heater power: 8 kW

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ storage silos made of stainless steel (material 1.4301) (formerly plastic granulate silo) Technical data / Dimensions Available quantity: 2 Volume: approx. 172,000 liters Container type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 20,000 mm Weight: approx. 9,000 kg Specific weight of the medium: 0.6 tons/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Properties Material of inner lining: Stainless steel Notes: Material: 1.4301 Support structure: Base ring / base flange Type of bottom: Conical bottom Slope: approx. 15% Type of bottom (lower part): Cone Cone angle: 60 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eyes 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded-in nozzle for full level indicator Gbedoxvtvuspfx Aatet 1 x flange DN 100 (filling) 1 x vent with cap Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in a TW connection 1 x welded-in adapter for empty level indicator Bottom: The silos end at the bottom in a 60° cone with an emergency shut-off valve and a mounted extraction spout (see photos). A three-section ladder with back protection and rest platforms is available as an option.

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Gbedpszw D Hasfx Aatet Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment