Used Molding Machine for sale (65,010)

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. Iedpfx Ajz Iqa Sogysbc It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Ibodpfoz Iqz Nox Agyec Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ibjdpfx Agsz Ipq Noyjc Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request

Condition: used, Year of construction: 2015, Technical details: closing pressure: 6600 kN Ibsdpfx Agow I E R Neyoc weight of the machine ca.: 45,5 t

Condition: excellent (used), Year of construction: 2013, operating hours: 30,533 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, plate length: 630 mm, plate height: 580 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 4,100 kg, Equipment: documentation/manual, BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control System: UNILOG B6 Year of Manufacture: 2013 Operating Hours: 30533 h Technical Data - Clamping Unit Clamping Force: 900 kN Tie Bar Distance h x v: 420 x 370 mm Platen Size h x v: 580 x 630 mm Minimum Mold Height: 450 mm Maximum Mold Height: 925 mm Ibsdpfx Aoz A A Hyjgyec Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Mold Weight: 800 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 rpm Screw Torque: 490 N Free Injection Rate: 103 g/s PS Number of Heating Zones: 4 Nozzle Distance: 250 mm Dimensions & Weight Machine Dimensions L x W x H: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull, 2x Air valve, 1x Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant Screw drive with three-phase servomotor Ethernet interface EUROMAP 13 interface EUROMAP 67 Handling interface Interface for color dosing unit Interface for temperature control unit Schuko socket 10A Mold heating, 8x

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270PM Baujahr: 2008 Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Ibedowf I Hijpfx Agyoc Schnecken DN: 40 mm Max. Hubvolumen: 160,8 cm³ Spritzteilgewicht in PS: 154,3 g Kernzüge 2 Stück

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Isdpfez Eimfex Agyjbc Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: excellent (used), Year of construction: 2005, Arburg 320A 500-170 with the sprue picker / electric machine Year of manufacture: 2005 Injection unit: Screw diameter: 35 mm injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit : clamping force: 50 t tie bar distance: 320x320 mm Ibsdpoz Iqxhofx Agysc size of clamping platens: 446x446 mm ejector: electric clamping unit: toggle lever Control system: SELOGICA Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface injection unit hardened - bimetal Central lubrication Machine with the built-in conveyor belt Arburg and original sorting flap Dimensions: Weight: 3500 kg Length/width/height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating power: 5,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: reconditioned (used), Year of construction: 2004, machine/vehicle number: 63237, clamping force: 350 kN, total length: 2,759 mm, total width: 886 mm, total height: 1,900 mm, overall weight: 1,310 kg, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Ibedpfxsz Armfj Agyjc Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control system: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold thickness: 302 mm Opening stroke: 225 mm Rotating platen diameter: 900 mm Ejector force: 70 kN Centering of moving platen diameter: 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment • Screen text in German • Rotating platen • Hydraulic core pull (1x) • Machine with water manifold • Machine without material hopper • Leveling elements Isdpjzyn Exofx Agyjbc • EUROMAP 67 handling interface • EUROMAP 73 interface • Interface for ejector plate locking

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of construction: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Drive force of movable platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clear opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool mounting height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 48 kN Iedpfx Aexu Uvaegyjbc Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / option: 1/min 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 121026

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: Ibjdpfxew Hwr Dj Agysc - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: excellent (used), Year of construction: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of construction: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Injection pressure: 2041 bar Metering volume: 653 ccm Clamping unit: Clamping force: 270 t Distance between tie bars: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with horizontal injection units arranged in parallel Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm Injection weight: 446.8 g Injection pressure: 2016 bar Dosing volume: 491 ccm Ibodpfx Agoz Ipg Doysc Dimensions Weight: 15000 kg Length/width/height: 6.90x1.78x2.34 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Isdsz Ip Hqopfx Agyjbc Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, Year of construction: 2008, 4 x Arburg injection molding machines Ibsdpfszclpzox Agyjc Arburg injection molding machine 470C 1500-400, year of manufacture 2008 Arburg injection molding machine 270M, year of manufacture 1995 Arburg injection molding machine 270S 500-150, year of manufacture 2004 Arburg injection molding machine 320M 750-210, year of manufacture 1998

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Ijdpfsz Iq E Uox Agyjbc Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, Injection molding machine ARBURG, type Allrounder 221 M 350-75 Serial No. 163646, Year of manufacture 1995 Clamping force 35 tons (350 kN) Screw diameter, presumably Ø 25 mm Platen size 342 x 250 mm Mold size, max. 221 mm Mold mounting height 150 to 300 mm Column spacing 221 mm (center distance) Opening stroke - platen stroke, max. 200 mm Ejector stroke 60 mm Ejector force 27 kN Hydraulic oil tank capacity 120 liters (delivery without oil) Heating capacity 4 kW Motor power, hydraulic pump 7.5 kW Power supply 400 volts, 50 Hz, 12 kW - ARBURG MULTRONICA control system with foil keyboard and screen - Stainless steel granulate hopper, 50 liters, on the injection unit - Adjacent control cabinet Ibedpezx Etwsfx Agyec Space requirement without transport pallet, L x W x H 2750 x 1350 x 1850 mm Transport dimensions on pallet, L x W x H 2750 x 1700 x 1900 mm Weight approx. 1300 kg Good condition

Condition: excellent (used), Year of construction: 2001, Arburg 320K 700-100 Year of construction: 2001 Injection unit: Screw diameter: 30 mm Injection weight: 59 g Injection pressure: 1550 bar Dosing volume: 70 ccm Clamping unit : Clamping force: 70 t Distance between tie bars: 320x320 mm Size of the clamping platens: 476x476 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA Additional equipment: Hydraulic core pull x 1 Hardened injection unit - bimetal Central lubrication Original Arburg mold crane, 2 lifting speeds, lifting capacity 100 kg Dimensions: Weight: 2170 kg Length/width/height: 2.94x1.45x1.99 m Drive: Pump/motor: 11 kW Heating output: 4.9 kW Total output: 15.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Ibsdpfx Agjz Iq Dkeyec Price: On request

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Ibedpfjz Ip A Ssx Agysc Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Ibedpfxsz Iq Iij Agysc Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW Ibedpfx Asz Iq Ddogyec All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Clamping unit Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Isdpfxozw Azve Agyjbc Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Iodpfx Aow U Tyljgyjbc Year of manufacture: 2013 The machine is equipped with an injection unit offering 7000 kN clamping force and a specific injection pressure of 1580 bar. It features a mixing screw with a diameter of 80 mm, allowing for a maximum stroke volume of 1860 cm³ and a maximum shot weight (for PS) of 1692.6 g. The screw rotation speed reaches up to 200 rpm, and the plasticizing capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. The clamping system enables mould installation with a mould height range from 400 to 940 mm and a clearance between tie bars of 940 × 960 mm. The opening stroke is 970 mm. Mould centring on the A.S. and D.S. sides is 200 / 200 mm. The ejector stroke stands at 260 mm (stroke) and 200 mm (passage). Equipment includes core drives: - on the moving platen – 2 units, - on the fixed platen – 2 units.

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Ibedpfoz Ipt Dox Agysc Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Iodpfx Agsz Ipykoysbc Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.