Used Monforts Knc 5 for sale (38)

Condition: used, Year of construction: 1995, turning diameter 800 mm turning length 2700 mm control Monforts MTC K Duodjwizm Ropfx Aa Njt

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D Dujdpfoyv Ha Ajx Aa Nst spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 538/04, turning diameter over cross slide: 300 mm, turning length: 600 mm, spindle bore: 52 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, torque: 240 Nm, overall weight: 7,000 kg, swing diameter over bed slide: 440 mm, Equipment: documentation/manual, Well-maintained Monforts RNC 500, can be inspected under power. Fanuc 18 i TB control 12 driven tool stations with VDI 40 mount Counter-spindle collet 173 E Main spindle Kitagawa 3-jaw chuck BB 208 Hydrostatic circular guideway FAPT programming system Main and counter spindle Chip conveyor Coolant system with flat bed filter Duodpfxeyrbmho Aa Not Parts catcher with transfer device Ejector in counter spindle Short bar loader Samsys Multi 3000 Reduction tubes Rinse gun C-axis Y-axis Further machine equipment – see photos

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Dusdpfxoyhqb To Aa Nst

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Monforts RNC 500 MultiTurn, year of manufacture 2007 The machine was last serviced by Monforts Werkzeugmaschinen GmbH in July 2025 and is in excellent condition. Duedpfexcwdvsx Aa Njt All tools and accessories are included. Inspection possible by appointment.

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg Price: On request In very good condition. In 2017 Refurbished for €32.000 - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Teach-in - Control system brand: Monforts - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) Djdpfey Ivx Eox Aa Nsut - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase induction motor with a speed range of 30-4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 A machine we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over radial slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material clearance: 65 mm • Main drive: Three-phase induction motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: Three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: On separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm shaft diameter (VDI 40), directional logic and plane gear positioning • Hydraulics: Central pressure oil supply for hydrostatics and clamping; hydraulic hollow clamping device (max 65 mm) • Coolant system: 310 L tank, 3 bar, 40 L/min • Control and features: 256 kB memory (expandable to 1.5 MB), DIN 66025 programming, 2D/3D simulation, RS-232C serial interface, tool compensation (up to 600 tools), constant cutting speed, thread cutting/tapping • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measurement setup • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Technical Specification Counter Spindle No Dedpoy If A Hefx Aa Njut Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 410 mm, travel distance Z-axis: 280 mm, spindle motor power: 30,000 W, overall weight: 6,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-station disc turret and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 400 AC machine we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Material clearance (bar capacity): 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), 40 mm shaft diameter Dodpfoy Ifptox Aa Neut • Driven tools: 12 stations; max power 13.6 kW (25% ED); max torque 28.9 Nm; max speed 4500 rpm • C-axis: 0–25 rpm; 300 Nm holding torque • Tailstock: Separate guide rail; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 • Hydraulic system: Central pressure oil supply for hydrostatics and clamping • Cooling: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; steel welded construction on reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional equipment • Hydraulic hollow clamping device • Parts catcher • A6 drawtube for collet chuck • 200 mm suction nozzle • 1 GB storage expansion • Network card • Driven tools with tapping without compensation chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 1996, swing diameter 530 mm turning diameter 150 mm spindle passage 65 mm control SIEMENS 840 C travel x1 175 mm travel y1 +/- 70 mm travel z1 433 mm travel x2 175 mm Dujdpsvh Nbnjfx Aa Njt travel y2 +/- 70 mm travel z2 433 mm spindle turning speed range 38 - 4000 U/min C-axis 2 x tool turret 2 x 12 Pos. number of driven tool stations 2 x 12 tool shaft (cylinder shaft DIN 69880) VDI 30 total power requirement 33 kW dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant

Condition: excellent (used), Year of construction: 2008, We are offering this very well-maintained Monforts RNC 600 MultiTurn CNC turning and milling center, year of manufacture 2008. Duedpfjyr N Hcox Aa Nst

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Dedpfetxquhjx Aa Nout

Year of construction: 1991, condition: ready for operation (used), Maschinentyp - CNC Drehmaschine / CNC lathe Hersteller/ Manufacturer - MONFORTS Modell RNC3 Baujahr / Year of manufacture - 1991 Steuerung /control typ: FANUC 15T Werkzeugenanzahl: 12 Stk angetriebene Werkzeuge / Number of tools: 12 pcs driven tools Die Spindel kann bei 2,5 Grad positioniert werden / The spindle can be positioned at 2.5 degrees Dedpjwqc Rtjfx Aa Njut 3-Backen-Hydraulikfutter / 3-jaw hydraulic chuck Automatische Werkzeugmessung / Automatic tool measurement Späneförderer / Chain conveyor Kühlwasserausrüstung / Cooling water equipment Preis: auf Lkw geladet / Price: loaded on truck Mit Dokumentation / With documentation Die Maschine steht schon nicht unter Strom. Wegen neue Maschine kauf möchten wir verkaufen, bis die Demontage hat alle gut funktioniert./ Because of new machine purchase we would like to sell until dismantling has everything working well.

Condition: used, Year of construction: 2008, turning diameter 280 mm turning length 600 mm Dusdpfjydfqzex Aa Njt Turning diameter: 280 mm Turning length: 600 mm