Used Mori for sale (475)

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ Knodjxdcigspfx Aabsc - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,597 h, functionality: fully functional, turning length: 424 mm, turning diameter: 370 mm, bar diameter (max.): 65 mm, turning diameter over bed slide: 370 mm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning diameter: 370 mm Turning length: 424 mm Swing diameter: 370 mm X1-axis travel: 380 mm X2-axis travel: 155 mm Z1-axis travel: 460 + 155 mm Z2-axis travel: 610 mm y-axis travel: ±105 mm B-axis travel: ±120° Bar diameter: 65 mm Spindle 1 Maximum speed: 6,000 rpm Number of speed ranges: 2 (winding switch) Spindle mounting: JIS A2-5 Spindle bore: 61 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 100 mm Maximum torque (40% DC/continuous): 223/158 Nm Spindle 2 Maximum speed: 6,000 rpm Number of speed ranges: 1 Spindle mounting: 80 g6 flat nose Spindle bore: 38 mm C-axis resolution: 0.0001° Spindle diameter (front bearing): 70 mm Maximum torque (15% DC/continuous): 49/22 Nm Tool Spindle Number of tool stations: 1 Tool shank type: C5 Spindle diameter (front bearing): 65 mm Tool change time (tool to tool): 1.2 s Maximum tool diameter with adjacent positions occupied: 70 mm Maximum tool diameter with adjacent positions free: 130 mm Maximum tool length: 250 mm Maximum tool length (over 70 mm diameter): 210 mm Maximum tool weight: 5 kg Minimum indexing increment for B-axis: 0.0001° Maximum spindle speed: 12,000 rpm Maximum torque (15% DC/continuous): 49/22 Nm Turret 2 Number of tool stations: 10 Maximum shank diameter for boring bars: max. 32 mm Feed Drives Rapid traverse X-axis (tool spindle): 40,000 mm/min Rapid traverse Y-axis (tool spindle): 40,000 mm/min Rapid traverse Z1-axis (tool spindle): 50,000 mm/min Rapid traverse X2-axis (lower turret): 30,000 mm/min Rapid traverse Z2-axis (lower turret): 30,000 mm/min Knodpfx Aajxf A Apoboc Rapid traverse A-axis (workpiece unloading unit): 36,000 mm/min Rapid traverse B-axis: 100 rpm Rapid traverse C-axis: 250 rpm Tool Magazine Tool magazine: chain magazine, 76 positions Control Control: MSX-711-IV Mori Seiki Control system: MAPPS MACHINE DETAILS Power-on hours: 75,992 h Total power consumption: 45 kW Weight and Dimensions Machine weight: approx. 10.5 t Space required: approx. 2.71 × 2.43 × 2.40 m Operating Hours Head 1 Operating time: 48,606 h Machining time: 8,597 h Operating Hours Head 2 Operating time: 48,382 h Machining time: 2,664 h EQUIPMENT Renishaw HPRA Blum Laser Control Direct measuring system X, Y, Z, B SMW Autoblok KSZ-MB-040-Z140 collet chuck Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / HPC via milling spindle, 7-stage up to 70 bar Chip conveyor ConSep 2000

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, Under 150 spindle hours!!! Including HAIMER Power Clamp Economic Plus NG shrink fit device, year: 2024 Including tool holders, clamping devices, and tools Manufacturer: DMG MORI SEIKI Model: DMU 50 3rd Generation, Stealth Design Control: CELOS with HEIDENHAIN TNC640 Year: 2024 Operating hours (approx.): Spindle hours: 140 h, Power-on hours: 790 h EQUIPMENT: - Swivel rotary table, simultaneous - Direct measuring systems and plane transformation in B and C axes - Scraper belt chip conveyor with cleaned gap sieve - Internal coolant supply (IKZ) - Coolant/air blow-off switchable via M-function - Rotating inspection window - Rinsing gun for chip removal - Oil and emulsion mist extractor - Infrared probe, Renishaw Blue Power Probe Kit - Laser tool measurement Renishaw NC4 - Tool length and diameter measurement - Automatic cleaning of the measuring system by air blast - Calibration arbor for tool measurement - 3D quickSET - Quick stop for machine protection, MPC – Machine Protection Control - Automation interface, Profibus M65 - Automatic loading door - Work table with 4-channel rotary feedthrough - Machine-side automation software interface - Electronic handwheel - RMS sensor, internal handling - Digital Manufacturing Package - Messenger V4 - Service Agent - Direct path measuring systems in all axes TECHNICAL DATA: Travel paths: X: 650 mm, Y: 520 mm, Z: 475 mm Clamping area: D630 x 500 Swivel range: -35 to +110° Rotary axis: 360° Rapid traverse: 42 m/min, direct drive Tool holder: HSK-A36, BIG-PLUS compatible, speedMASTER® motor spindle Kjdpfoxgh H Nsx Aabonc Spindle speed: 20 – 20,000 rpm Spindle power: 35 kW/25 kW (40/100% duty cycle) Spindle torque: 130 Nm/86 Nm (40/100% duty cycle) Tool magazine: 60 slots, incl. setup aid for loading This used machine can be inspected under production conditions. All information without guarantee – sale excludes any guarantees and warranties. Subject to prior sale. Our general terms and conditions of sale and contract apply.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,500 h, DMG Mori DMC850 V Siemens Control Operating hours: Automatic cycle: 10,500 hours Condition: Very good condition, regularly serviced and well maintained at all times! Capacity & Working Area X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Table dimensions 1000 x 570 mm Main spindle Max. speed: 14,000 rpm SK40 taper Knjdpfx Aswzk Saoabjc 30 tools Max. tool length 300 mm Feed axes Rapid traverse (X / Z): 36 m/min Feed rate: 36,000 mm/min Tailstock Taper: MK NC axis, pressure control via M-codes Dimensions & Weight Machine dimensions (L x W x H): 5.5 x 3.5 x 2.8 m Weight: 6,700 kg (without chip conveyor and coolant) Chip Management Chip conveyor Coolant pump (KSS) General specification: 30 tools Measuring probe

Condition: ready for operation (used), Year of construction: 2000, Immediately available ex location: CNC Vertical Machining Center Mori Seiki Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load: 2 t Travel X/Y/Z: 1530 / 660 / 650 mm Knjdexn Rxwopfx Aabsc Distance spindle – table: 200 – 850 mm Distance spindle – column: 690 mm Taper: SK 50 Spindle speeds up to 6000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Internal coolant supply (IKZ) Feed rates: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1260 mm/min Total power: 52.5 kVA Chip conveyor Weight: 16 t Price: EUR 7,000.00 plus VAT, ex location.

Condition: excellent (used), Year of construction: 2014, Machine is offered complete with accessories. Machine type: - DMG MORI DMC 650V - Year of manufacture: 2014 - Travel paths: X=650mm, Y=520mm, Z=475mm Machine hours: - Machine on: 15,864 - Spindle on: 7,529 Control: - Heidenhain TNC 640 control - Electronic handwheel Working spindle: - Tool holder: SK40 - Speed range: max. 18,000 rpm Tool magazine: - Tool changer with 30 magazine positions Table configuration: - Fixed angle table - Clamping surface: 900 x 570 mm Ksdpfsxf Iqlsx Aabonc Tool measurement: - Tool Eye - 3D infrared probe Blum Accessories: - 1 magnetic clamping plate (see table) - Approx. 130 tool holders SK40 equipped (see picture) - 3D probe Blum Additional options: - Chip conveyor - Belt filter system - Rinsing gun for chip removal - Documentation Delivery time: - Immediately or by arrangement

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand FANUC Model na Kedexd H S Sjpfx Aabjnc Main Drive Spindle speed range 8000 Number of axis 4 Workpiece Workpiece X 800 mm Workpiece Y 500 mm Workpiece Z 700 mm This 4-axis MORI SEIKI MCV 500 was manufactured in 2002. It features a working area of 800 × 500 × 700 mm, a Neuroma THS 350 H table with pneumatic tailstock, and a tool magazine capable of holding 20 tools with an ISO 40 taper. The spindle operates at 8,000 rpm. If you are looking to get high quality milling capabilities consider the MORI SEIKI MCV 500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2005, operating hours: 48,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMU50, year 2005 Kedpfjv U R Iiox Aabonc 5-axis machining center 3 + 2 axes (not simultaneous) Heidenhain iTNC 530 Spindle speed up to 10,000 rpm 30-position tool changer SK40 DIN69871 Chip conveyor Heidenhain infrared 3D probe Without vise The machine can be inspected at our facility.

Condition: used, Year of construction: 2021, controller manufacturer: Siemens, controller model: 828 D, _____ Description: Year of manuf. : 2021 Control : Siemens 828 D Speed : 12000 rpm Movement X/Y/Z : 550/550/510 mm Tool holder : SK40 Spindle: Technology:Inline spindle Speed:12,000 rpm Power (max.):13 kW Kodpfsxfflgox Aabenc Tool holder:SK40 Work table: Clamping surface:850 x 650 mm Table load (max.):600 kg General: Tool magazine:24 stations with double gripper Rapid traverse in X/Y/Z:24 m/min Features/Accessories: Chip management:Chip conveyor Coolant management:IKZ system with 20 bar Tool measurement:Renishaw, TS27R Workpiece measurement:Renishaw 3D measuring probe (infrared) Additional equipment:Mechanical preparation for oil mist separator

Condition: good (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 470 mm, The machine is in good technical condition, with inspection during operation possible by prior arrangement. Technical specifications: X-axis - 1600 mm, Y-axis - 500 mm, Z-axis - 470 mm, Kedpfx Aaexlr Axsbenc table: 830x540 mm, max. table load: 700 kg, spindle speed: 100-6000 rpm. Required installation area: 3160x3035 mm, machine height: 2690 mm, weight: 9000 kg.

Condition: used, Year of construction: 2001, functionality: fully functional, Japanese-built 4-axis CNC lathe for secondary machining, featuring C axis, Y axis, and driven tools. Installed in 2002 and compliant with CE standards, with the following main specifications: Turning diameter: 755 mm Workable diameter: 390 mm Workable length: 655 mm 12-position driven turret Y axis travel: +/- 60 mm C axis Spindle nose: A2-8 Kitagawa B-210, 250 mm Spindle speed: 3,500 rpm Spindle motor: 18.5 kW Driven tool motors: 5.5 kW Driven tool speed: 4,000 rpm Bar capacity: 73 mm Tailstock: MT5 Rapid traverse speed: 18 and 24 m/min on X and Z axes Ksdpfxsxf Iygs Aabsnc Weight: 5,800 kg Complete with: - Hydraulic programmable tailstock - Box ways - Chip conveyor - Headstock oil cooling - Dual foot pedal for main chuck and tailstock open/close - Set of fixed tool holders - Set of driven tool holders - Complete manual set - CE certificate

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller model: Siemens 840D, total height: 3,264 mm, total length: 2,691 mm, total width: 3,965 mm, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 35,000 h, spindle nose: HSK A 63, number of spindles: 1, number of slots in tool magazine: 180, tool length: 300 mm, tool diameter: 125 mm, tool weight: 80 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Mori Seiki NMV5000 DCG is a true powerhouse, and we have taken it directly from production, fully operational, from our client (see video). Additional specifications: Max. workpiece weight on table: 300kg Table height (from floor): 870mm Max. workpiece height: 450mm Table rotation speed (in turning mode): 0 - 1200 min-1 Table rotation speed (standard): 0 - 120 min-1 Max. tool diameter: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Coolant tank capacity: 750L Ksdpfx Aoxgd Hxsabenc Machine dimensions: 2691x3965x3264 mm (LxWxH) Weight: approx. 15,000 kg total Includes: Original Mori Seiki tool block. KNOLL FKA/500 belt filter system + 3 filter rolls. Filtermist FX5000 emulsion mist extractor. Renishaw OMP60 3D probe. Chip conveyor. Spindle cooler. Original documentation + electrical diagrams. Photos were taken during disassembly at every stage and will be provided after purchase to assist with installation on site.

Year of construction: 1996, condition: ready for operation (used), Control Unit Knsdoxd H Tpspfx Aabec Brand FANUC Model na Main Drive Number of axis 2 Tools Number of index 12 This DMG Mori Seiki 150 SL was manufactured in 1996. A horizontal turning machine featuring a turning diameter of 150 mm, swing over saddle of 430 mm, and distance between centers ranging from 180 to 500 mm. It comes equipped with 12 tools. Consider the opportunity to buy this DMG Mori Seiki 150 SL horizontal turning machine. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, total height: 2,800 mm, total length: 2,230 mm, total width: 2,665 mm, table width: 650 mm, table length: 850 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,377 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in as-new condition and available for immediate delivery. 3-axis geometry is within manufacturer tolerances. The main spindle runs smoothly and is in as-new condition with 0.003 mm runout. Retention force is also good at 8 kN. Lubrication and hydraulic oils have been replaced. All functions have been tested. Of course, the machine can be inspected and tested on site. Transport and installation are available at extra cost and by arrangement. The machine is equipped with all options available on an M1. Chip conveyor / coolant system / internal coolant 20 bar / air through spindle center Manual wash gun Knodpowytmkofx Aabjc Renishaw OMP 60 probe TS27 tool measurement Machine hours: 14,150 hours / automatic mode: 1,377 hours, mostly aluminium machining.

Condition: used, Year of construction: 2016, x-travel 600 mm y-travel 560 mm z-travel 510 mm Control Siemens SlimLine Max. rpm 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 82 / 54 Nm tool taper SK 40 distance spindle nose and table 120 - 630 mm table surface area 900 x 560 mm max. table load 600 kg T-slots 5 work height max. 850 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg rapid traverse 30 m/min feed power 5 kN feed speeds max. 30.000 mm/min total power requirement 32 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,0 x 5,0 x 3,0 m CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V - Operating hours: 6,516 h Kjdpfetqmnpsx Aabenc - Spindle hours: 2,868 h

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 20 - 14000 Tool taper ISO40/SK40 DIN69871 Number of axis 3 Movement X-Axis Movement 1150 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 1460 mm Outer width 750 mm Additional Equipment Infrared touch probe Make: Renishaw PP 60 optical (OMP 60) Tool length and diameter measurement Knodpfxsxpklys Aabsc Automatic cleaning of tool holders using an air jet Tool cone calibration equipment Safety package for power supply failure Overvoltage limiter Undervoltage monitoring with rapid braking activation Electronic handwheel Chip extractor (chip scraper) This 3-axis DMG MORI DMC 1150 V was manufactured in 2016. A robust vertical machining center featuring a 1150 mm X-axis, 700 mm Y-axis, and 550 mm Z-axis. It boasts a rapid traverse of 42 m/min and a speed range up to 14,000 rpm. Equipped with a Heidenhain TNC 640 control, 30-position SK40 tool magazine, and a chip extractor system. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1150 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm Kjdpfx Astqmt Teabenc numbers of pallets 2 size of pallet 400 x 400 mm max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m CNC - Machiningcenter Horizontal MORI SEIKI - SH 400

Condition: used, Year of construction: 2011, turning diameter max. 356 mm turning length 1.255 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm distance between spindles 1.511 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bore 91 mm max. bar capacity 80 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm x-travel 260 mm z-travel 1.345 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 43 kVA weight of the machine ca. 7,8 t Kedpfx Aaotqmp Sjbenc dimensions of the machine ca. 6,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle - only 9.600 Spindle hours (May 2023)

Condition: used, Year of construction: 2014, turning diameter max. 356 mm Knjdpfx Aswd Txnsaboc turning length 705 mm control 730 UM Celos greates pass round over bed 920 mm Swing dia. over traverse guideway 740 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min Tipp feed 0 - 5.000 mm/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 49 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only 13.000 hours of processing time - incl. 4x driven tools - incl. 6x standard holders

Condition: used, Year of construction: 2018, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m Ksdpfx Aaevy Ig Hjbsnc CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - C, Y-Axis

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Ksdpju Hq Rlefx Aabenc Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV Kedpfx Aov E R E Njabonc greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm Ksdpfevzhiqjx Aabjnc dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Knsdpfxetqmqwo Aabjc Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control 840 D sl Siemens turning speed range - main spindle 20 - 10.000 min/-1 Kjdewntx Nopfx Aabsnc power capacity - main spindel 13 / 9 kW max. Torque 130 / 87 Nm tool taper SK 40 DIN 69871 table surface area 630 x 500 mm max. table load 300 kg Swivel range 115 (-110 / +5) ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse X/Y/Z: 24 m/min feed speeds X/Y/Z: 10.000 mm/min total power requirement 32 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis simultaneous - swivable rotary table