Used Mori Seiki Sh 400 for sale (210)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Fedpfx Aeyxm Irja Nogb Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B axis Hydraulic unit Spindle oil cooler Note: The loading shaft must be supplied by the buyer.

Condition: ready for operation (used), Year of construction: 1998, Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment. Fgjdpfx Aaeyzh A No Nsb

Condition: ready for operation (used), Year of construction: 1999, operating hours: 24,364 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Fanuc MSC 501 (Fanuc 16i), spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Fgedpfxoyc Unmj Aa Njb Spindle speed range: 10,000 rpm Spindle motor power: 22 kW Rapid traverse (x/y/z): 32 mm/min Tool magazine capacity: 40 (SK40) Pallet size: 2 x 400 x 400 mm Table load: 0.5 t Table indexing: 1° MACHINE DETAILS Control: Fanuc MSC 501 (Fanuc 16i) Total power requirement: 56 kVA Dimensions & Weight Required space: approx. 2.9 x 4.1 x 3 m Machine weight: approx. 8.7 t Operating hours: 24,364 h EQUIPMENT Chip conveyor Interface for internal coolant supply

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 CONTROL MORI FANUC MSC 501 Fjdpfx Aaetvau Hs Nogb TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm Fedpfx Asy Er Tgsa Negb max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: ready for operation (used), Year of construction: 2005, total height: 3,080 mm, table width: 3,275 mm, overall weight: 7,600 kg, product length (max.): 2,000 mm, This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details. • Axis Travels: • X Axis: 600 mm • Y Axis: 425 mm + CUA stroke 75 mm • Z Axis: 450 mm • A Axis Rotation: 360° • B Axis Rotation: −20° / +110° • Distance between table and spindle nose: 65 – 515 mm • Table Diameter: Ø 350 mm • Maximum Workpiece Weight: 200 kg • Table Turning Speed: 30 – 1500 rpm • Tool Magazine Capacity: 50 tools • Maximum Tool Diameter (with adjacent tools): Ø 90 mm • Maximum Tool Diameter (without adjacent tools): Ø 125 mm Fgsdoynhy Hopfx Aa Nsb • Maximum Tool Length: 300 mm • Maximum Tool Weight: 8 kg • Rapid Traverse X–Y–Z: 45000 mm/min

Condition: used, Year of construction: 1995, functionality: fully functional, Year of manufacture: 1995 ▪ FANUC CNC control ▪ Travels: X 840 mm, Y 840 mm, Z 760 mm ▪ Milling spindle: 10,000 rpm ▪ Spindle motor power: 30 kW ▪ Spindle taper: ISO 50 (DIN 69871) ▪ Tool magazine with 60 positions Fodpfxeywugys Aa Nogb ▪ No. 2 pallets, 630 x 630 mm ▪ Full-contouring rotary table (4th axis) ▪ Coolant through spindle, 40 bar with enlarged tank and paper filter ▪ Chip conveyor ▪ Tool presetting/presence probe ▪ Electronic handwheel (MPG) ▪ Weight: 18,500 kg X & Z axes rails and carriages replaced in 2022 Spindle line newly rebuilt in 2024 Tool changer gearbox newly rebuilt in 2024

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial number: 450 The machine is still under power and available at short notice. • P8 Power Supply worth €1,500 was newly replaced in August 2024 • The spindle was repaired in 2017 and, since then, has mostly been used in single-shift operation, as we primarily produce single parts and small batches. For this reason, the machine has spent most of its time being set up. Fgodpfxsyt Nnpj Aa Nsb • Machine: Milling machine Mori Seiki SH50 • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travels: X630mm / Y600mm / Z650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed of the X axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring on the pallet changer is likely defective, leading to oil leakage. As a temporary fix, we installed a ball valve in between; when we need to change pallets (which is not very often), we open it manually. The machine is sold as viewed, without any guarantee or warranty. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or need further information, please feel free to write us a message or call us.

Condition: good (used), Year of construction: 2002, 1 x horizontal machining center Mori Seiki SH 403 Year of manufacture: 2002 Control: Fanuc MGS 501 with chip conveyor High-pressure pump 50 bar Technical data: Travel: X:560 Y:510 Z:510 mm Fgodpfxjwyw Tue Aa Neb Rapid traverses X/Y/Z: 42,000 mm/min Max spindle speed: 12,000 rpm Taper: ISO 40 Tool changer: 40 positions Pallet size: 400 x 400 mm Number of pallets: 2 Table indexing: 1° Additional photos will follow. The machine can be inspected under power in operation.

Condition: like new (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 560 m/min, rapid traverse Y-axis: 560 m/min, rapid traverse Z-axis: 660 m/min, nominal power (apparent): 38 kVA, controller manufacturer: MITSUBISHI MSX-853 IV, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,513 mm, total length: 2,720 mm, total width: 4,224 mm, table width: 400 mm, table length: 400 mm, overall weight: 7,600 kg, spindle speed (min.): 12,000 rpm, CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 Fgsdoy Rn Nbopfx Aa Nsb APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: 38 Operating Time: 31.113 Basic machine dimensions / weight Length mm: 2.720 Width mm: 4.224 Height mm: 2.513 Weight kg: 7.600

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit Fgsdjyk Hrgopfx Aa Neb - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 840 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of axes: 4, This 4-axis MORI SEIKI SH633 was manufactured in 2001. It features an X-axis travel of 840 mm, Y-axis travel of 760 mm, and Z-axis travel of 840 mm. The machine is equipped with 2 pallets, each measuring 630 x 630 mm, and can handle a maximum workpiece weight of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SH633 horizontal machining centre we have for sale. Contact us for further details. • Machine mass: 18,500 kg • Number of pallets: 2 • Pallet size (L x W): 630 x 630 mm • Maximum workpiece weight: 1,200 kg • Number of tool pockets: 60 • Electrical specs: • Phase: 3 • Frequency: 50 Hz • Voltage: 200 V • Full load current: 252 A • Spindle motor current rating: 120 A • Interrupting capacity: 5 kA • Rated power: 87 kVA Fgjdpfxsyyzqko Aa Nsb

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, overall weight: 9,950 kg, spindle speed (max.): 14,000 rpm, number of axes: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2013. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and weighs approximately 10,000 kg with the rotary table. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details. • Power connection: 200 V / 3-phase / 50 Hz • Control: MORI SEIKI Additional equipment • CONSEP chip conveyor Fjdeyw Rh Topfx Aa Nsgb • KNOLL coolant filter unit, model FKA/500/KF110 (2013)

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, overall weight: 9,950 kg, spindle speed (max.): 14,000 rpm, number of axes: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2012. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and includes a rotary table, CONSEP chip conveyor, and KNOLL coolant filter unit. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details. • Connection specifications: 200V / 3 phases / 50Hz • With rotary table • Control: MORI SEIKI Additional equipment • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filter unit (2012) Fjdpfxeyw N R He Aa Njgb

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 14,000 rpm, number of axes: 4, This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details. • Units available: 2 • CNC Horizontal Machining Center (Mori 1) MORI SEIKI NH4000 DCG • Connection specifications: 200V/3 phases/50Hz • Table dimensions (W x D): approx. 40 x 40 cm • Control: MORI SEIKI • approximately 10000 kg • Horizontal CNC Machining Center (Mori 2) MORI SEIKI NH4000 DCG • Operating hours: 22,031 Fgodpfsyw N I Sex Aa Njb • Power supply: 200V/3 phases/50Hz • Control: MORI SEIKI • approximately 9950 kg Additional equipment • Mori 1 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filter unit (2011) • Mori 2 • CONSEP chip conveyor • KNOLL FKA/500/KF110 coolant filter unit (2011)

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal Fedpfx Aex Hpytja Nogb MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t Fgodpfxsx Hpyms Aa Neb dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: ready for operation (used), Year of construction: 2002, operating hours: 400 h, General Data Machine weight 15000 kg Measurements height 3950 mm Fedpfx Aox D D I Dja Negb Dimensions Machine Length 9500 mm Table Table load 1000 kg Control Unit Brand FANUC Model 16iMA Main Drive Spindle Speed 10000 RPM Number of axis 3 Spindle motor power 30 kW Movement Z-Axis Movement 1000 mm Y-Axis Movement 1200 mm X-Axis Movement 1080 mm This 5-axis MORI SEIKI SH8000/5AX was manufactured in 2002. Fully overhauled in 2016, it features a Fanuc 16iMA control, a spindle speed of 10,000 rpm, and a tool magazine with a capacity of 150 tools. The machine has a pallet size of 630 × 630 mm and a loading capacity of 1000 kg. If you are looking to get high quality milling capabilities consider the MORI SEIKI SH8000/5AX machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Axis travel: 560x560x620 mm MSX-501 control system Machine is stocked in our Bulgaria warehouse. IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! Fjdpfxsnyh R Ts Aa Nogb You are welcome to contact us for your further questions CNC World Machine LTD

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis MORI SEIKI NV4000 was manufactured in 2003. It features a CNC control system, typically FANUC/MAPPS, and a vertical machining center design. Key specifications include a 600 mm x 400 mm x 400 mm axis travel, a table size of 700 mm x 450 mm, and a maximum spindle speed of 12,000 rpm. The tool magazine holds up to 40 tools. Consider the opportunity to buy this MORI SEIKI NV4000 vertical machining center. Contact us for more information. • Table size: 700 × 450 mm Fgedpfsx Imudex Aa Neb • Max workpiece size (L × W × H): approx. 750 × 450 × 400 mm • Tool holder type: BT40 (Big Plus option common) • Tool magazine capacity: typically 40 tools • Rapid traverse (X/Y/Z): 42 m/min • Machine technology: DCG – Driven at the Center of Gravity design to reduce vibration and increase accuracy and surface quality Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Control: F31iA X axis travel mm: 560 Y axis travel mm: 560 Z axis travel mm: 630 B axis travel: 360.000° Table load capacity: 400 kg Cutting feed rate X/Y/Z mm/min: 50,000 Maximum rapid traverse X/Y/Z m/min: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: BT-40 Torque Nm: 120 Magazine type Magazine positions: 60 Maximum tool diameter mm: 70 Maximum tool diameter with adjacent positions empty mm: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through spindle coolant pressure bar: 70 EQUIPMENT Chip conveyor Through spindle coolant with high-pressure pump, 70 bar Tool breakage detection probe Renishaw spindle measuring system Extended tool offsets: up to 400 offsets Additional coordinate systems: 48 Workpiece coordinate systems Tool life management Extended program memory: Total length 1,280 m (512KB) Up to 1,000 storable programs Preparation for NH4000 8CPP + 8 Pallets Fgsdpfeyhlqpsx Aa Njb

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travels & Axes Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 630 mm B-axis: 1° increment index table Rapid Traverses Rapid traverse X-axis: 50 m/min Fgjdpfxsyk A S Nj Aa Neb Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Maximum workpiece height: 900 mm Maximum workpiece diameter: 630 mm Maximum workpiece weight: 400 kg Spindle & Tools Maximum spindle speed: 14,000 rpm Distance spindle center to pallet surface: 80–640 mm Distance spindle nose to pallet center: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Condition: used, Year of construction: 2007, x-travel 560 mm y-travel 560 mm z-travel 630 mm Control MSX 701 III MAPPS Max. rpm 14.000 min/-1 power capacity - main spindel 18,5 / 11 kW max. Torque 120 Nm tool taper MAS BT 40 distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 100 - 730 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm max. workpiece height 900 mm change time of pallets 6,0 sec b - axis 0,001 ° number of toolpositions 60 pos. tool taper MAS BT 40 max. tool diameter 70 / (140) mm max. tool length 400 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 50 m/min feed speeds 0 - 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 35 kVA Fjdowbi Adopfx Aa Njgb weight of the machine ca. 9,8 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC - Machiningcenter Horizontal MORI SEIKI - NH 4000 DCG - pallet-changer - Control options Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Fodpox Hpw Sofx Aa Negb Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Fedsx Hpvujpfx Aa Negb Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm