Used Mori Seiki Sl 1 for sale (204)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial Number: 450 The machine is still under power and can be made available at short notice. • P8 power supply valued at 1500.- was replaced as recently as August 2024 • The spindle was repaired in 2017 and since then has mainly been operated in single-shift mode. As we primarily produce individual parts and small batches, the machine has spent most of its time being set up rather than running • Machine: Mori Seiki SH-50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travel: X 630mm, Y 600mm, Z 650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed on the X-axis has been reduced by 20% to extend the life of the telescopic covers. Seal ring on the pallet changer is likely defective, resulting in oil leakage. As a temporary fix, we have installed a ball valve in between; whenever a pallet change is required, the valve is opened. This doesn’t happen very often. Lsdpfxjyt Nnpo Abcehd If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 450 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 12,400 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 130 mm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production—see the videos of the machine operating prior to disassembly! Lhjdjyq Emiepfx Abced The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machining center, designed for precision manufacturing in industries where complex geometries and exact tolerances are crucial. Included: - KNOLL FKA/500 band filter system + 3 filter rolls. - Filtermist FX5000 coolant mist extractor. - Renishaw OMP60 3D probe. - Chip conveyor - Spindle cooler - Original Mori Seiki tool holder block. - Original documentation + electrical diagrams. This Mori received a new spindle some time ago, which has only seen limited operating hours since. Report available!

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control MSC 803 25-fold automatic tool changer coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 510 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 750x550 mm Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 25 fach Spindelaufnahme / spindle taper BT40 Gewicht der Maschine ca. / weight 4500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Lhedpfx Aewhkcxsbcjd Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki lathe DOUBLE TURRET Model ZL-45 B Year 1991 CNC Fanuc Ledpfjypb Nkjx Abcshd Sold complete With documentation With chip conveyor

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Lodpfx Absx D H T Ajcohd Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC control M 730 BM Center distance: 500 mm Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Power: 11/7.5 kW (25% duty cycle / constant) Lodpeyml Dmefx Abcohd Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil mist separator Hinged belt chip conveyor Renishaw workpiece measuring system with optical signal transmission, counter spindle Cooling of the ball screw in the X-axis

Condition: excellent (used), Year of construction: 2007, CNC Control: MSX-501III X axis mm: 730 Y axis mm: 730 Z axis mm: 850 B axis mm: 0.001 Pallet size mm: 500 x 500 Number of pallets: 2 Table load capacity kg: 500 Cutting feed mm/min X, Y, Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 22/18.5 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Ljdjythpropfx Abcohd Tool magazine positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent pockets empty: 140 Max. tool length mm: 500 Max. tool weight kg: 8 Coolant tank capacity l: 760 Through-spindle coolant bar: Yes Equipment Chip conveyor Internal coolant Rigid tapping Manuals, electrical diagrams, etc.

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 1,100 mm, overall weight: 6,600 kg, spindle speed (max.): 10,000 rpm, Manufacturer: Mori Seiki Model: SV-50 Control: MSC 516 MB Axis: 3+2 (Nikken) X / Y / Z Travel: 800 × 510 × 510 mm Table size: 1100 × 600 mm Max. table load: 1,000 kg Spindle: BT40 & 30 positions Spindle speed: 10,000 rpm Tool changer: 20–30 stations Lhedpfoyuw Akex Abcsd Machine weight: approx. 7,000 kg Availability: From June SOLDE GmbH specializes in the purchase, sale, dismantling, and loading of industrial machinery. With our expertise, we also handle the entire process, including disassembly, transport preparation, and export. We operate our projects throughout Europe, primarily with large machine tools such as machining centers, milling machines, and boring mills.

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Lhodpfx Abjx D Sc Nocod Measurements depth 3994 mm Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Workpiece drm over bed 590 mm Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2003, MORI SEIKI - NH5000-40 - 2003 Lhsdpfx Ajyl Sq Rjbcod - used machine, condition as on photos - can be tested under power upon agreement

Condition: like new (used), Year of construction: 2017, operating hours: 3,493 h, turning diameter over cross slide: 742 mm, turning length: 705 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, spindle motor power: 15,800 W, total height: 2,200 mm, total length: 3,350 mm, total width: 2,110 mm, swing diameter over cross slide: 742 mm, workpiece weight (max.): 500 kg, overall weight: 5,820 kg, bar passage: 80 mm, Year of construction: 2017 CNC controller: Mitsubishi M730UM mit CELOS Capacity Y-axis travel mm:±50 Turning length mm: 705 Max. turning diameter mm: ø 356 Swing over bed mm: ø 920 Swing over cross-slide mm: 742 Bar work capacity mm: 80 Upper turret X-axis travel mm: 260 Z-axis travel mm: 795 Ledpfjykt Dcex Abcjhd Number of tool slots St .: 12 Speed ​​driven tools RPM: 10000 Main spindle Speed ​​spindle rpm: 4000 Drive power spindle kW: 15.8/15 Spindle bore mm: 111 Chuck type: 10" Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Counter spindle Speed ​​spindle rpm: 6000 Drive power spindle kW: 11/7.5 Spindle bore mm: 73 Chuck type: 6" Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle travel mm: 734 Equipment Chip conveyor Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Working time hours Under power: 3493 Spindle 1: 1700 Rated power kVA: 45 Basic machine dimensions / weight Length mm: 3350 Width mm: 2110 Height mm: 2200 Weight kg: 5820

Condition: ready for operation (used), Year of construction: 1998, Horizontal machining center MH-400 with 10-station pallet pool; Flat guideways; Pallet size: 400 x 400 mm; Additional 10 exchange pallets; Pallet can be indexed in 1° increments; Internal coolant supply with Knoll system; 120 tool stations; 10,000 rpm; Chip conveyor; Fanuc control; Machine can be inspected under power by appointment; Price includes machine disassembly! Loading and transport are not included in the price; Lhedpfsyrryrex Abcsd

Condition: like new (used), Year of construction: 2008, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: 20,000 - 25,000 euros. * Year: 2008. * Only 1,800 cutting hours. * 5-axis machine. * Subspindle. * 12-station turret, all positions driven. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Subspindle integrated motor: 15 kW. Lsdpfx Aoyvz R Nobcehd * Direct drive motor for driven tools: 5.5 kW. * Motor starting torque: 640 Nm. * Beltless and gearless motors. * Main spindle nose size: A2-8. * Subspindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Subspindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Driven tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. * Conversational automatic programming system: Mapps 4. * Automatic load control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret index change time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports: USB, PCMCIA card, and RS-232. * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening/closing of main and subspindle chucks. * Side-mounted hinge-type chip conveyor. * Extensive set of static and driven tool holders. * Electrical transformer. * Documentation included: parts list, electrical schematics, programming and operation manuals. * Weight: 5,800 kg. * Machine currently in operation. * Precision videos must be checked. * Only used for prototyping AOG aeronautical components in aluminum. * Immediate delivery unless sold prior.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control: MSX 701-III Technical data: Travel (X-Y-Z): 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Lhjdpfx Asyrdn Uobcjd Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2,200 kg Max. workpiece diameter: 1,450 mm Max. workpiece height: 1,450 mm Spindle speed: 8,000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1,300 mm Distance between pallet center and spindle nose: 100–1,450 mm Total connected load: 86 kVA Machine dimensions: approx. 7,200 x 4,300 x 3,850 mm Machine transport dimensions: approx. 7,000 x 3,400 x 3,300 mm Machine weight: approx. 30 t Total weight incl. magazine and accessories: approx. 37 t Scope of delivery: 1x Mori Seiki NH8000 DCG machine 1x matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer various tool holders

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,900 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 73 kVA, torque: 302 Nm, controller manufacturer: Fanuc, controller model: MGS-501, workpiece height (max.): 900 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 2,770 mm, total length: 4,900 mm, total width: 2,595 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 8,000 rpm, overall weight: 13,200 kg, operating hours of spindle: 35,000 h, distance table center to spindle nose: 100 mm, number of spindles: 1, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 120 mm, tool weight: 30 g, input voltage: 380 V, type of input current: three-phase, tool holder type of tool turret 1: ISO 50, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully functional. It is currently in operation machining parts. A visit and live demonstration while machining workpieces is possible. Lsdpfoyuxaksx Abcehd

Condition: excellent (used), TECHNICAL DETAILS CNC Control: FANUC Series 31i-A5S X axis (mm): 500 Y axis (mm): 350 Z axis (mm): 510 B axis (mm): +160 to -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø350 Table load capacity (kg): 300 Cutting feed rate X,Y,Z (mm/min): 50,000 / 50,000 / 40,000 Maximum rapid traverse X, Y, Z (m/min): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Tool changer type: Chain Tool magazine capacity: 120 positions Lodpfxjym Rt To Abcshd Max. tool diameter (mm): 90 Max. tool diameter with adjacent positions empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts: Included Work light: Included Through-spindle coolant system Hydrajet WP10-1000: Included Electronic handwheel integrated into CNC panel: Included Coolant oil separator: Included MACHINE DIMENSIONS Length (mm): 2,339 Width (mm): 3,820 Height (mm): 3,250 Weight (kg): 9,400

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, workpiece length (max.): 1,000 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 120, controller manufacturer: FANUC, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, controller model: FS-31IA (MAPPS III), feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 14,000 rpm, tool length: 500 mm, workpiece diameter (max.): 800 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Lodpfxjvw Sc To Abcshd Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Condition: excellent (used), Year of construction: 2010, MORI SEIKI DuraVertical 5060 Year: 2010 Control MSX-504 III x-travel 600mm y-travel 530mm z-travel 510mm Main spindle: turning speeds max. 10.000min/-1 power capacity - main spindel 15 / 11kW tool taper BT 40 spindle bearing diameter 70mm distance spindle /table 150 - 660mm work table: table surface area 900 x 600mm max. table load 500kg T-slots 6x 18mm turret: Ledpexq Hlxefx Abcshd number of toolpositions 30pos. tool taper BT 40 max. tool diameter 80mm max. tool-dia with free toolbox 125mm max. tool length 300mm max. tool weight 8,0kg feeds: rapid traverse ( X / Y / Z ) 36 / 36 / 20m/min feed speeds max. 6.000mm/min Tipp feed 0 - 5.000mm/min total power requirement 27kVA weight of the machine ca. 5,8t dimensions of the machine ca. 3,5 x 3,0 x 2,8m Accessories/options: 4.axis rotary table tool holders BT40 type, 30 pieces precision vice swarf conveyor coolant tank documentations

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control MSX 501 spindle turning speed - stepless 14000 U/min tool taper BT 40 pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach Ledsygx D Topfx Abcshd table-size 500 x 500 mm total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m

Condition: excellent (used), functionality: fully functional, Driven Tools Machine: MORI SEIKI SL2000 Turret Manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request 1x→ No. 444-201 Double Turning Tool Holder For main spindle and sub spindle With 1 clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request Lhedpfeynb E Nex Abced 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts from MORI SEIKI VL250 Bj.2000 1.turret(not complete) Ball screw with nut X and Z axis Ljdpjcbinnefx Abcehd X and Z axis guides parts are from new machine Motor X-axis See photos.

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Lhedpfx Aewifzljbcsd Table: 1100x600mm BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Complete machine documentation available.

Condition: good (used), Year of construction: 1997, CNC Vertical Machining Center MORI SEIKI Type: SV500-50 Year 1997 Fanuc MSC-518 Control Table: 1100 x 600 mm Travel: X 800 - Y 510 - Z 510 mm Rapid traverse 32 m/min Spindle mount: BT50 Spindle speeds up to 6000 rpm Lhodpfx Aowa Nvuebcod Complete documentation available. A clamping magnet is not included in the machine delivery. For further information, see data sheets:

Condition: ready for operation (used), Year of construction: 2013, A CNC 4-axis machining center is for sale: Working area X/Y/Z: 730mm/730mm/850mm, Pallet size X/Y: 500mm/500mm, 2-position pallet changer APC, Tool holder: BT40/SK40, Control: FANUC 32i-A, Installation dimensions L/W/H: approx. 4800mm/2800mm/2900mm, Machine weight: approx. 12000kg. Viewing possible by appointment. Lhodsyln Edepfx Abced

Year of construction: 2009, condition: ready for operation (used), A twin spindle turning center in T2Y2 version is offered. Working area turning diameter/turning length/bar capacity max.: 320mm/810mm/65mm, Speed main and counter spindle: up to 5000rpm, Tool turret: 2x16 stations, Control: MSX-701-III, Installation dimensions L/W/H: approx. 3950mm/2200mm/2350mm, Machine weight: approx. 8300kg. Viewing possible by appointment. Ledpfx Abjyln Daocshd